Votes - 2, Average rating: 3.5
(
)
)
|
Other manuals for this model:
manual abstract
793DF/797DF/997DF/793MB/795MB SyncMaster 591S/793S/591V/793V/783DF/795DF 793DF/797DF/997DF/793MB/795MB SyncMaster 591S/793S/591V/793V/783DF/795DF Ge nera l BNC Connectors (Option) Connecting the General Monitor Installing the Monitor Driver Base Installation 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Connecting to a computer Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 2-2. Connecting to a new Macintosh Connect the monitor to the Macintosh computer using the D-SUB connection cable. 2-3. Connecting to an old Macintosh Connect your monitor to the Macintosh using the adapter for Macintosh (sold separately). 3. Turn on your computer and monitor. If your monitor displays an image, installation is complete. BNC Connectors (Option) SyncMaster 997DF 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Connecting to a computer Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 2-2. Connecting to a new Macintosh Connect the monitor to the Macintosh computer using the D-SUB connection cable. 2-3. Connecting to an old Macintosh Connect your monitor to the Macintosh using the adapter for Macintosh (sold separately). 3. When you use a BNC connector. Connect the signal cable to the BNC signal port on the back of your monitor/computer. 4. Turn on your computer and monitor. If your monitor displays an image, installation is complete. Setup-For Multimedia model 1. Turn off your computer and unplug the power cord. 2. Connect the end of the signal cable to your computer's video port(video board, video card or graphics card). 3. Connect one end of the other sound cable to the Mic Input jack on your sound card or computer.Connect the other end of this cable to the Mic By-pass jack on the back of the monitor stand. 4. Plug the DC power cord from the stand into a nearby outlet. 5. Connect the power cord for your monitor to the power port on the back of the monitor. 6. Plug the power cord for the monitor and the power cord for your computer into a nearby outlet. 7. Turn on your computer and monitor. 8. Turn up or down the On-Off control terminal on the stand of the monitor until it clicks. 9. Execute a sound program, music or sound effect in your computer and then adjust the volume by turning up or down until the sound volume is appropriate. 10. Adjust the treble and bass. Sound distortion may occur when the monitor is placed on top of a mostly hollow cabinet such as your computer. If this occurs, place a pad or magazine beneath the monitor stand. High sound volume may also cause sound distortion; lower the volume. Multimedia Speaker Stand 1. Mic By-pass Jack To transmit your voice,connect a sound cable from the Mic By-pass jack to the mic in jack on the sound card slot in your computer. 2. Stereo Input Jack Connect a sound cable from the input source(sound card,computer,CD-ROM drive). 3. DC Power Cord Connect DC power cord to monitor DC 12V output jack. 4. Power Indicator Glows green when the speakers are turned on. 5. On/Off Volume Turns On/Off and adjusts the output volume. 6. Treble Control Use to control high frequencies. 7. Bass Control Use to control low frequencies. 8. Mic Input Jack To transmit your voice,connect a microphone to this jack. 9. Headphone Jack To listen in privacy,connect headphones here. 10. Detachable Stand Top Connecting the Monitor When prompted by the operating system for the monitor driver, insert the CD-ROMincluded with this monitor. Driver installation is slightly different from one operating Installing the Monitor Driver system to another. Follow the directions as appropriate for the operating system youhave. Base Installation Prepare a blank disk and download the driver program file at the Internet web site shown here. • Internet web site : (WorldWide) (USA) (Korea) (China) Windows ME 1. Insert CD into the CD-ROM drive. 2. Click "Windows ME Driver". 3. Choose your monitor model in the model list, then click the "OK" button. 4. Click the "Install" button in the "Warning" window. 5. Monitor driver installation is completed. Windows XP/2000 1. Insert CD into the CD-ROM driver. 2. Click "Windows XP/2000 Driver". 3. Choose your monitor model in the model list, then click the "OK" button. 4. Click the "Install" button in the "Warning" window. 5. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor Homepage 6. Monitor driver installation is completed. Windows XP | Win...
Other models in this manual:Displays - 591S (5.52 mb)
Displays - 591V (5.52 mb)
Displays - 793DF (5.52 mb)
Displays - 793MB (5.52 mb)