Votes - 3, Average rating: 4.3
(
)
)
|
Other manuals for this model:
manual abstract
Put down the monitor carefully. • Failing to do so may damage the monitor. Do not place the monitor face down. • This may damage the TFT-LCD surface.The installation of the bracket must be done by a qualified professional. Installing a wall bracket must be done by a qualified professional. • Installing the bracket by unqualified personnel may result in injury. • Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10 cm/4 inches) for ventilation purposes. • Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance. Keep the plastic packaging (bag) out of children's reach. • The plastic packaging (bag) may cause suffocation if children play with it. Clean When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric. Do not spray water or detergent directly onto the monitor. • This may cause damage, electric shock or fire. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. • A dirty connector may cause electric shock or fire. Make sure to unplug the power cord before cleaning the product. • Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. • Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. Contact the SAMSUNG customer care center or Customer Center for interior cleaning once a year. • Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause a malfunction or fire. Others Do not remove the cover (or back). • This may cause electric shock or fire. • Refer to a qualified servicing company. If your monitor does not operate normally -in particular, if there is any unusual sound or smell coming from the monitor -unplug it immediatelyand contact an authorized dealer or the Service Center. • This may cause electric shock or fire. Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle. • This may cause a malfunction, electric shock or fire. • In particular, avoid operating the monitor near water or outdoors where the monitor could be exposed to snow or rain. If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact the Service Center . • The monitor may malfunction, causing electric shock or fire. Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time. • Failure to do so may cause electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. • This may cause a breakdown, electric shock or fire due to damage to the cable. Do not move the monitor right or left by pulling only the wire or thesignal cable. • This may cause a breakdown, electric shock or fire due to damage to the cable. Do not cover the vents on the monitor cabinet. • Bad ventilation may cause a breakdown or fire. Do not place water containers, chemical products or small metal objects on the monitor. • This may cause a malfunction, electric shock or fire. • If a foreign substance enters the monitor, unplug the power cord and contact the Service Center. Keep the product away from combustible chemical sprays or inflammable substances. • This may cause an explosion or fire. Never insert anything metallic into the monitor openings. • This may cause electric shock, fire or injury. Do not insert metal objects such as chopsticks, wire and tools orinflammable objects such as paper or matches into the vent, headphoneport or AV ports or etc. • This may cause electric shock or fire. If an alien substances or water enters the product, turn the product off, unplug the power connector from the wall outlet and contact the Service Center. When viewing a fixed screen for an extended period of time, residual image or blurriness may appear. • Change the mode to energy saving mode or set a screensaver to a changing picture when away from the monitor for an extended period of time. Adjust the resolution and frequency to the level appropriate for themodel. • An inappropriate resolution may cause undesirable picture quality. 19 inch Wide (48 cm) -1440 X 900 Viewing the monitor continuously at a too close angle may result indamage to your eyesight. To ease eye strain, take at least a five-minute break after every hour of using the monitor. Do not install the product on an unstable, uneven surface or a location prone to vibrations. • Dropping the product may cause damage to the product or the person carrying it. Using the product in a location prone to vibrations may shorten the lifetime of the product or may cause the product to catch fire. Wh...
Other models in this manual:Displays - 940BWPLUS (3.32 mb)