Votes - 4, Average rating: 4.5
(
)
)
|
Other manuals for this model:
manual abstract
Demo The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left. Full Displays not only vivid natural color but also more realistic natural skin color with clearness. Intelligent Displays vivid natural color with clearness. MENU > , > > > , > MENU The tone of the color can be changed and one of four modes can be selected -Cool, Normal, Warm and Custom. MENU > , > > , > > , > MENU Adjusts individual Red, Green, Blue color balance. -Red, Green, Blue MENU > , > > , > > , > > , > MENU Gamma correction changes the luminance of the colors with intermediate luminance. - Mode 1 - Mode 2 - Mode 3 MENU > , , , > MENU > > > > Menu Description Play/Stop Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control Coarse Fine Sharpness H-Position V-Position OSD menu. MENU > , > > > , > MENU Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after adjusting the frequency (clock speed). MENU > , , , > MENU > > > > Changes the clearance of image. MENU > , > > , > > , > MENU Changes the horizontal position of the monitor's entire display. MENU > , > > , > > , > MENU Changes the vertical position of the monitor's entire display. MENU > , , , > MENU > > > > Menu Language H-Position Description Play/Stop You can choose one of nine languages. The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. MENU > , , > MENU > > > You can change the horizontal position where the OSD menu appears on your monitor. MENU > , , , > MENU > > > > You can change the vertical position where the OSD menu V-Position Transparency Display Time Setup appears on your monitor. MENU > , > > , > > , > MENU Change the transparency of the background of the OSD. MENU > , , , > MENU > > > > The menu will be automatically turned off if no adjustments are made for a certain time period. You can set the amount of time the menu will wait before it is turned off. - 5 Sec, 10 Sec, 20 Sec, 200 Sec MENU > , > > , > > , > MENU Menu Auto Source Image Reset Color Reset Information Description Play/Stop Select Auto Source for the monitor to automatically select the signal source. MENU > , , > MENU > > > Image parameters are replaced with the factory default values. MENU > , , , > MENU > > > > Color parameters are replaced with the factory default values. MENU > , , , > MENU > > > > Menu Description Information Shows a video source, display mode on the OSD screen. MENU > , SyncMaster 732N Model Check List Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. Symptom No images on the screen. I cannot turn on the monitor. Check List Is the power cord connected properly? Can you see "Check Signal Cable" on the screen? If the power is on, reboot the computer to see the initial screen(the login screen), which can be seen. Can you see "Not Optimum Mode", "Recommended Mode 1280 x 1024 60 Hz" on the screen? There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals? Solutions Check the power cord connection and supply. (Connected using the D-sub cable) Check the signal cable connection. If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows ME/XP/2000) and then change the frequency of the video card. (Refer to the Preset Timing Modes) If the initial screen (the login screen) does not appear, contact the Service Center or your dealer. You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly. Adjust the maximum resolution and frequency that the monitor can handle properly. If the display exceeds SXGA or 75 Hz, a "Not Optimum Mode", "Recommended Mode 1280 x 1024 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properly but the "Not Optimum Mode", "Recommended Mode 1280 x 1024 60 Hz" message appears for one minute and then disappears. Please change to the recommended mode during this one-minute period. (The message is displayed again if the system is rebooted.) The monitor is in PowerSaver mode. Press a key on the keyboard to activate the monitor and restore the image on the screen. If there is still no image, press the 'SOURCE' button. Then press any key on the keyboard again to activate the monitor and restore the image on the screen. I cannot see the On Screen Display. The screen shows strange colors or just black and white. The screen suddenly has become unbalanced. The screen is out of focus or OSD cannot be adjusted. LED is blinking but no images on the screen. There are only 16 colors shown on the screen. The screen colors have changed...
Other models in this manual:Displays - 732N (4.96 mb)