Votes - 2, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
• Always use the mounting device specified in the owner's manual. Leave a space for ventilation between the product and the wall. • Poor ventilation may cause the interior temperature to rise and lead to a fire. Clean When cleaning the monitor case or the surface of the TFT-LCD, wipe with a slightly moistened, soft fabric. Do not spray water or detergent directly on the monitor. • This may cause damage, electric shock or a fire. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. • A dirty connector can cause an electric shock or fire. Contact a Service Center or Customer Center for interior cleaning once a year. • Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause malfunction or a fire. Other Do not remove cover (or back). No user serviceable parts inside. • This may cause an electric shock or a fire. • Refer servicing to qualified service personnel. If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service. • This may cause an electric shock or fire. Be careful not to let water drip into the monitor or expose the monitor to moisture. • This may cause malfunction, an electric shock or a fire. • Especially avoid operating the monitor near water or outdoors where it could be exposed to snow or rain. If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. • The monitor may malfunction, causing an electric shock or a fire. • Then contact the Service Center . Keep the power off when there is thunder and lightening outside, or let the monitor remain unused for an extended period of time. • The monitor may malfunction, causing an electric shock or a fire. Do not try to move the monitor by pulling on the wire or the signal cable. • This may cause a breakdown, electric shock or a fire due to damage to the cable. Do not move the monitor right or left by pulling only the wire or the signal cable. • This may cause a breakdown, electric shock or a fire due to damage to the cable. Do not cover the vents on the monitor cabinet. • Bad ventilation may cause a breakdown or fire. Do not place water containers, chemical products or small metal objects on the monitor. • This may cause malfunction, an electric shock or a fire. • If a foreign substance enters the monitor, unplug the power cord and contact the Service Center . Do not use or store inflammable substances near the monitor. • This may cause an explosion or fire. Never insert anything metallic into the monitor openings. • This may cause an electric shock, fire or injury. Do not insert metal objects such as utensils, wire or drill bits, or things that catch fire easily, such as pieces of paper or matches, into the vents or the headphone or A/V ports on the monitor. • This may cause malfunction, an electric shock or a fire. • Always contact the Service Center if foreign substances/objects enter into the monitor. If you view a fixed screen for an extended period of time, residual image or blurriness may appear. • Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time. Adjust the resolution and frequency to the levels appropriate for the model. • Inappropriate resolution may cause undesirable picture quality. 17 inch - 1280 X 1024 Keep a proper distance between your eyes and the monitor screen. • Sitting too close to the monitor on a continuous basis may damage eyesight. To ease eye strain, take at least a five-minute break after every hour of using the monitor. Do not use the monitor where it can be exposed to strong vibrations. • Exposure to strong vibrations can be a fire hazard and shorten the life of the monitor. When moving the monitor, turn the power switch off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connecting to other devices, are disconnected before moving the monitor. • Failure to disconnect a cable may damage it and lead to a fire or an electric shock. SyncMaster 710V/910V/712V Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Unpacking Monitor Monitor Bottom Hanger Manual User's Guide, Monitor Dirver, Natural Color Quick Setup Guide Warranty Card software, MagicTune™ software CD Cable D-Sub Cable Power Cord Front 1. Menu button [ ] Use this button to open the on-screen menu and exits from the menu screen or closes screen adjustment menu. 2. MagicBright™ MagicBright™ is a new feature providing optimum viewing environment button [ ] depending on the contents of the image you are watching. Currently four different modes are available: Custom, Text, Internet, and Entertain. Each mode has its own pre-configured brightness value....
Other models in this manual:Displays - 153V (4.71 mb)
Displays - 510M (4.71 mb)
Displays - 710M (4.71 mb)
Displays - 710V (4.71 mb)