Votes - 5, Average rating: 3.6
(
)
)
|
Other manuals for this model:
manual abstract
14. Exit button On the User Controls screen, press to return to the previous menu screen or to exit the current screen. Makes the PIP window disappear when selected in PIP mode. 15. Swap button Switches the main screen to PIP and vice versa. 16. Location button Moves the position of the PIP window on the screen. OSD Functions Characters and icons become highlighted in blue during adjustment for each menu. PC Control | Video Control | Audio Control | Function Control 1. PC Control For detailed information on Screen Adjustment in the PC mode, refer to PC mode Screen Adjustment Animation Clips. BrightnessAdjust Brightness. Contrast Adjust Contrast. Color Temperature The tone of color can be changed. The individual color components are also user customizable. 1) Mode 1 : High Temperature. 2) Mode 2 : Middle Temperature. 3) Mode 3 : Low Temperature. 4) User Mode : User customizable. ImagePC Screen Settings. 1) Image Lock Image Lock is used to fine tune and get the best image by removing noises that creates unstable images with jitters and shimmers. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. 2) Image SizeAllows choosing from different image sizes. Varies depending on the resolution or signal ratio. The Expand 1, Expand 2 and 1:1 functions work only in PC RGB. • Coarse : Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the Horizontal Control menu. • Fine : Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). • Reset : Image lock and position parameters are replaced with the factory default values. • Expand 1 : Performs full screen image expansion. (No change if the resolution is set at maximum) • Expand 2 : Performs image expansion while maintaining the vertical/horizontal aspect ratio of the original video resolution. (No change if the resolution is set at maximum) • 1 : 1 Displays the image as created by the signal source. (No change if the resolution is set at maximum.) Position This adjusts the screen location horizontally and vertically. OSD Functions 2. Video Control For detailed information on Screen Adjustment in the Video mode, refer to Video mode Screen Adjustment Animation Clips. You can use this function only if your screen mode is Video 1 or Video 2 or Component. BrightnessAdjust Brightness. Contrast Adjusting Contrast. SharpnessUse to adjust the difference between the lightest and darkest areas on the display. Color Use to adjust the lightness/darkness on the display. Tint Use to add the natural tone to the display. Reset Picture parameters are replaced with the factory default values. Image SizeResizing the screen. • Expand 1 • Expand 2 • 1 : 1 • Panorama • Zoom 1 • Zoom 2 OSD Functions 3. Audio Control For detailed information on Screen Adjustment in the Audio mode, refer to Audio mode Screen Adjustment Animation Clips. Sound Select is available when the PIP is on. Bass Emphasize low frequency audio. Treble Emphasize high frequency audio. Balance Sound balance ==> Allows you to adjust the sound balance between the left and the right speakers. (The ideal setting is 50 for the left speaker and 50 for the right speaker.) Virtual Dolby Virtual Dolby Sound On/Off (Virtual Dolby simulates the effect of the Dolby Surround sound system, recreating the movie-theatre or concert-hall- quality sound.) Sound Select You can select either Main or Sub when PIP is On. OSD Functions 4. Function Control For detailed information on Screen Adjustment in the Function mode, refer to Function mode Screen Adjustment Animation Clips. Advanced Picture 1) Zoom (Available only for VIDEO 1, VIDEO 2) 2) DNIe (Digital Natural Image engine) Samsung’s New Technology bring you more detailed image with contrast enhancement and white enhancement. New image compensation algorithm gives brighter, cleare, to our customers. DNIe technology will fit every signals into your eyes. 3) Reset • Zoom : Magnifies the size of the picture on screen. • Pan : Moves the position of the magnified image on the screen either vertically or horizontally. • Off : Switches off the DNIe mode. • Medium : Switches on the DNIe mode. • High : The screen is more clear than in Medium. • Demo : The screen before applying DNIe appears on the right and the screen after applying DNIe appears on the left. ID (MDC Program) Assigns individual ID to the SET. 1) ID Setup : Assigning distinctive IDs to the SET. 2) ID Input : Use to select the transmitter functions of the individual SET. Only the SET whose ID corresponds to the transmitter setting becomes activated. PIP When external A/V devices such as VCR or DVD are connected to the monitor, PIP allows you to watch video from such devices in a small window super-imposed on pc video signal. (On/Off) 1) On / Off 2) Size Resizing the PIP Screen. 3) Source Select the input source for t...
Other models in this manual:Displays - 403T (5.06 mb)
Displays - S/M403T (5.06 mb)