Votes - 2, Average rating: 4.5
(
)
)
|
Other manuals for this model:
manual abstract
To view original image without geometrical distortion, aspect ratio must be preserved. The aspect ratio of SyncMaster240T is 16:10 that is neither 4:3 nor 5:4. Thus if the input image resolution has the aspect ratio of 4:3 or 5:4, full screen expansion to 16:10 makes image looked wider to the horizontal direction. This is not appropriate especially for those who do CAD, CAM, and Graphic oriented jobs. To resolve this, IMAGE SIZE control provides three different image expansion methods: Expand 1, Expand 2, and Normal. Notice. This function is not available for UXGA and WUXGA modes. • Expand 1 Performs full screen image expansion regardless of the aspect ratio of the input video resolution • Expand 2 Performs image expansion while keeping the aspect ratio of the original video resolution. Usually, there will be some unfilled space to the horizon direction. • Normal Performs no image expansion. In this mode, input video is displayed at the center of the monitor as it is. RECALL Discards current setting and replaces corresponding parameters with the factory default values. • Geometry Replace H-Position and V-Position values with the factory default values. • Color Replace R,G, and B values with the factory default values. Mode 1, Mode 2, Mode 3 and User Mode will be initialized. English 14 Adjusting Your LCD Monitor Table 1. Screen controls (Continued) Icon Menus and Sub-menus Function Descriptions – + Image Effect • Performs digital image quality compensation. • When an input video resolution is lower than 1920x1200 and if IMAGE SIZE is set to "Expand 1" or "Expand 2," then depending on the input video resolution, the expanded image becomes hazy or blurred. In this case, applying sharpening filter enhances the quality of the image, and Image Effect is the features providing such Digital Image Compensation Effects. Image Effect is applicable both Composite Video signals fed by RCA or S-Video connector and PC Video signals fed by D-Sub or DVI connector. • Sharpen Makes image looked sharper • Medium Makes image looked sharper but not as sharper as "Sharpen" • Soften Makes image looked smoother • Zoom • Performs Digital Zoom. • Any part of an image can be magnified by ZOOM feature and the center of magnification can be arbitrarily changed by PAN feature. • Magnifies an image • It work only with PC source. (Not working with UXGA & WUXGA mode.) • Pan • H-Pan – Moves magnified image to the horizontal direction – Same as changing the center of ZOOM to the horizontal direction • V-Pan – Moves magnified image to the vertical direction – Same as changing the center of ZOOM to the vertical direction English 15 Adjusting Your LCD Monitor Table 1. Screen controls (Continued) Icon Menus and Sub-menus Function Descriptions – + PIP(Picture-in- Picture) • Shows a small sub-window superimposed on Video or PC. (Refer to page 9.) • When Video is a full screen video source, then PC will be appeared in a small window. Likewise, when PC is a full screen video source, then Video will be appeared in a small window. • The monitor remembers the previous state of Video and PC. Thus if the previous state of PC was S-Video, and currently PC video is displayed in full screen, then S-Video will appear in the PIP window. • When powered on, PIP source is from DVI and Video is from S-Video. If your PC connects Analog or Video connects RCA, change source like below method. • When you touch SOURCE button when PIP feature is active, PIP source will be changed from RCA or S-Video to S-Video or RCA respectively, and from D-Sub or DVI to DVI or D-Sub respectively. • Size Off: Disables PIP 1: 400 x 300 2: 640 x 480 3: 800 x 600 • Position • H-Position Changes PIP window position to the horizontal direction. • V-Position Changes PIP window position to the vertical direction. English 16 Adjusting Your LCD Monitor Table 1. Screen controls (Continued) Icon Menus and Sub-menus Function Descriptions – + PBP (Picture by picture) • Shows PC and Video side by side. • The monitor screen splits by half and one side is filled with PC and the other side is filed with Video. Again, the monitor remembers the previous state of PC and Video. Thus if the previous state of PC is D-Sub and currently RCA is displayed in full screen mode, PC video signal from D-sub and Composite video signal from RCA will be displayed side by side. • PBP OFF: Disable PBP feature • PC Source 1: PC Video Signal Analog (D-Sub) • PC Source 2: PC Video Signal Digital (DVI) • Video Source 1: Normal Composite Video Signal (RCA) • Video Source 2: Super Video Signal (S-Video) • The method for source change is the same as PIP. PBP1 PBP2 MENUEXITAUTO PIPSOURCE VIDEO PC PC D-SUB DVI Video RCA S-Video MENUEXITAUTO PIPSOURCE VIDEO PC Video RCA S-Video PC D-SUB DVI MENU CONTROL • Sets up OSD appearances • Language – Selects one OSD language out of six different languages – English /Deutsch /Espanol /Francais /Italiano /Svenska • Halftone – Sets the transparency of the background of OSD – Use “–” and “+ “b...
Other models in this manual:Displays - 210T (1.06 mb)