Votes - 4, Average rating: 3.3
(
)
)
|
manual abstract
Note When connecting a device to the DOWN port of the monitor, connect the device using a cable appropriate to the device. (For the purchase of the cable and external devices, ask the service center of the corresponding product.) The company is not liable for problems or damages to an external device caused by using an unauthorized cable for the connection. Some products do not follow the USB standard, and it may cause a malfunction of the device. If the device malfunctions even if it is connected to the computer, contact the service center of the device/computer. Connecting the USB Monitor • System Requirements CPU : 1.73GHz or Later OS : Windows XP Service Pack2 or later. However, Windows Vista 64bit is not supported. RAM : 512 MB RAM or more USB : 1.1 or higher (USB 2.0 recommended) 1. Connect the UP port of the monitor and the USB port of the computer with the USB cable. 2. Connect the terminal ( ) of the USB monitor and the USB terminal ( ) of the primary monitor using a USB cable. Connections Note For more information on the driver installation and usage of the USB monitor, refer to Restrictions on the 7”USB Monitor . Installing and Using the USB Monitor 1. Engage and fix the USB monitor into the groove of the armrest holder. 2. You can adjust the location of the USB monitor. Note You can also adjust the length of the armrest holder after adjusting the location of the USB monitor. 1. Do not tilt the stand too far backwards when the USB auxiliary monitor is lifted up, as shown in the figure. This may change the center of gravity of the product resulting in the product falling causing product damage or personal injury. 2. When adjusting the angle of the USB auxiliary monitor stand, do not use too much force. This may cause the stand to break. Connections 3. Make sure to use the 7” USB monitor after properly adjusting the angle of its stand. This may cause the center of gravity of the product to change, leading causing the product to fall resulting in damage or a malfunction. 4. When moving a 7” USB monitor, take care not to knock the monitor against something. The monitor may become scratched. 5. When disassembling the 7” USB monitor, remove it by holding the part and pushing it in the direction of the arrow. Connecting Headphone Note You may connect your headphones to the monitor. Connections 1. Connect your headphones to the Headphone connection terminal. Connecting MIC Note You may connect your microphone to the monitor. 1. Connect the microphone cable to the MIC port on the monitor. Using the Stand Monitor Assembly Simple Stand Monitor and Bottom Connections Swivel stand Using ( ), You can swivel the monitor left and right at an angle of 350° to set the monitor lengthwise. The rubber under the stand is to avoid the monitor slide. When you try to rotate the monitor in the state of the power cord or cable connecting to the monitor, the power cord of cable can be destroyed. Tilt angle Using ( ), You can adjust the tilt angle within a range of -5° forward to 12° backward for the most comfortable viewing angle. Attaching a Base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad. Connections Monitor Mounting interface pad (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Turn the armrest holder upwards or downwards. Remove the screws on the armrest holder and remove it. 5. Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base. • Do not use screws longer than the standard dimension, as they may damage the inside of the Monitor. • For wall mounts that do not comply with VESA standard screw specifications, the length of the screws may differ depending on their specifications. • Do not use screws that do not comply with the VESA standard screw specifications. Do not fasten the screws too tightly, as this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. • Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. • To mount the monitor on a wall, you should purchase the wall mounting kit that allows you to mount the monitor at least 10 cm away from the wall surface. • Contact the nearest Samsung Service Center for more information. Samsung Electronics will not be responsible for damages caused by using a base other than those specified. • Please use Wall Mount according to the International standards. Using the Software Using the WebCam Monitor This monitor can be used as a normal monitor for video communications and for viewing multimedia files simply by connecting the p...