Votes - 1, Average rating: 3
(
)
)
|
Other manuals for this model:
manual abstract
• This may cause a fire. User’s Manual Safety Instructions Installation User’s Manual Safety Instructions Installation • Do not cover the vents on the monitor cabinet. • Bad ventilation may cause a breakdown or fire. • Put your monitor in a location with low humidity and a minimum of dust. • An electric shock or fire could result inside the monitor. • Do not drop the monitor when moving it. • This may cause damage to the product or human body. • Place the monitor on a flat and stable surface. • The monitor can cause injury by falling. • Set down the monitor carefully. • It could be damaged or broken. User’s Manual Safety Instructions Installation User’s Manual Safety Instructions Installation • Do not place the monitor face down. • The TFT-LCD surface may be damaged. User’s Manual Safety Instructions Clean User’s Manual Safety Instructions Clean When cleaning the monitor case or the surface of the TFT-LCD, wipe with a slightlymoistened, soft fabric. • Do not spray detergent directly on the monitor. • Use the recommended detergent with a smooth cloth. • If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. • A dirty connector can cause an electric shock or fire • Do not set a glass of water, chemicals or any small metal objects on the monitor. • This may cause damage, electric shock or a fire. • If a foreign substance gets into the monitor, disconnect the plug and then contact a service center. User’s Manual Safety Instructions Other User’s Manual Safety Instructions Other • Do not remove cover(or back). No user serviceable parts inside. • This may cause an electric shock or a fire. • Refer servicing to qualified service personnel. • If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service. • This may cause an electric shock or a fire. • Do not place any heavy objects on the monitor. • This may cause an electric shock or a fire. • For each hour of looking at the monitor, you should let your eyes rest for 5 minutes. • This will reduce eye fatigue. • Do not use or store inflammable substances near the monitor. • This may cause an explosion or fire. User’s Manual Safety Instructions Other User’s Manual Safety Instructions Other • Do not try to move the monitor by pulling on the wire or the signal cable. • This may cause a breakdown, electric shock or a fire due to damage to the cable. • Do not move the monitor right or left by pulling only the wire or the signal cable. • This may cause a breakdown, electric shock or a fire due to damage to the cable. • Never insert anything metallic into the monitor openings. • This may cause an electric shock, fire or injury. User’s Manual Introduction Unpacking (SyncMaster 172B/172S) User’s Manual Introduction Unpacking (SyncMaster 172B/172S) Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Unpacking D-Sub Cable Quick Setup Guide Monitor VESA Mounting Bracket Power Cord Warranty Card (Not available in all locations) User's Guide and Driver Installation CD DC-Adapter Multimedia Speaker Stand Sound Cables For Multimedia model (Option) User’s Manual Introduction Unpacking (SyncMaster 172T) User’s Manual Introduction Unpacking (SyncMaster 172T) Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Unpacking D-Sub Cable Quick Setup Guide DVI Cable (Option) Warranty Card (Not available in all locations) Monitor VESA Mounting Bracket Power Cord User's Guide and Driver Installation CD DC-Adapter For Multimedia model (Option) Multimedia Speaker Stand Sound Cables User’s Manual Introduction Front (SyncMaster 172B/172S) User’s Manual Introduction Front (SyncMaster 172B/172S) 1. Auto button Use this button to auto adjustment direct access. 2. Exit button Use this button to Exit the active menu or the OSD. 3. Adjust buttons These buttons allow you to highlight and adjust items in the menu. 4. Menu button Use this button to open the OSD and activate a highlighted menu item. 5. Power button Use this button to turn the monitor on and off. 6. Power indicator This light glows green during normal operation, and blinks green once as the monitor saves your adjustments. Note: See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. User’s Manual Introduction Front (SyncMaster 172T) User’s Manual Introduction Front (SyncMaster 172T) 1. Auto button Use this button to auto adjustment direct access. 2. Exit button Use this button to Exit the active menu or the OSD. Source button When push the 'Source' button, then Selects the Video signal while the OSD is off. (When the Source button is pressed to change the input mode, a message appears in the cent...
Other models in this manual:Displays - 172B (1.97 mb)
Displays - 172S (1.97 mb)