Votes - 2, Average rating: 4.5
(
)
)
|
Other manuals for this model:
manual abstract
The values of fine, coarse and position are adjusted automatically. 1. Push the Auto button. Auto Adjustment To make the automatic adjustment function sharper, execute the 'AUTO' function while the AUTO PATTERN is on. OSD Lock/Unlock 1. Push and hold in the Menu ( ) button for 5 seconds or more to Lock the OSD. 2. Push and hold in the Menu ( ) button for 5 seconds or more to Unlock the OSD. User’s Manual Troubleshooting Check List User’s Manual Troubleshooting Check List Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on theInformation section or contact your dealer. Symptom No images on the screen. I cannot turn on the monitor. Check List Is the power cord connected properly? Solutions Check the power cord connection andsupply. Can you see "No Connection, Check Signal Cable" on the screen? Check the signal cable connection. If the power is on, reboot the computerIf the initial screen (the login screen) to see the initial screen(the login appears, boot the computer in the screen), which can be seen. applicable mode (the safe mode forWindows ME/2000/XP) and then change the frequency of the video card. (Refer to the Preset Display Modes) Note: If the initial screen (the loginscreen) does not appear, contact a service center or your dealer. Can you see "Video mode not You can see this message when the supported" on the screen? signal from the video card exceeds the maximum resolution and frequency thatthe monitor can properly handle. Adjust the maximum resolution and frequency that the monitor can properlyhandle. There is no image on the screen. IsThe monitor is in PowerSaver mode. the power indicator on the monitorblinking at 1 second intervals? Press a key on the keyboard or movethe mouse to activate the monitor and restore the image on the screen. I cannot see the On Screen Display. Have you locked the On ScreenDisplay (OSD) Menu to prevent changes? Unlock the OSD by pressing the MENU button for at least 5 seconds. User’s Manual Troubleshooting Check List Symptom The screen shows strange colors or just black and white. The screen suddenlyhas become unbalanced. The screen is out of focus or OSD cannot be adjusted. LED is blinking but no images on the screen. There are only 16colors shown on the screen. The screen colors have changed after changing the video card. There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found". Check List Solutions Is the screen displaying only one coloras if looking at the screen through a cellophane paper? Check the signal cable connection. Make sure the video card is fullyinserted in it's slot. Have the screen colors become strange after running a program ordue to a crash between applications? Reboot the computer. Has the video card been set properly? Set the video card by referring to thevideo card manual. Have you changed the video card orthe driver? Adjust screen image position and sizeusing the OSD. Have you adjusted the resolution orfrequency to the monitor? Adjust the resolution and frequency atthe video card. (Refer to the Preset Display Modes). The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD. Have you adjusted the resolution orfrequency on the monitor? Adjust the resolution and frequency ofthe video card. (Refer to the Preset Display Modes). Is the frequency properly adjusted when checking the Display Timing on the menu? Adjust the frequency properly byreferring to the video card manual and the Preset Display Modes. (The maximum frequency perresolution may differ from product to product.) Have the Windows colors been set properly? For Windows ME/2000/XP: Set the colors properly at the Control Panel, Display, Settings. Has the video card been set properly? Set the video card by referring to thevideo card manual. Have you installed the monitor driver? Install the monitor driver according to the Driver Installation Instructions. See the video card manual to see if the Plug & Play (VESA DDC) function can be supported. Install the monitor driver according to the Driver Installation Instructions. User’s Manual Troubleshooting Check List User’s Manual Troubleshooting Check List Check the following items if there is trouble with the monitor. 1. Check if the power cord and the cable are properly connected to the computer. 2. Check if the computer beeps more than 3 times when booting. (If it does, request an after-service for the main board of the computer.) 3. If you installed a new video card or if you assembled the PC, check if the installed the adapter(video) driverand the monitor driver. 4. Check if the scanning ratio of the video screen is set at 75Hz or 85Hz. (Do not exceed 60Hz when using the maximum resolution.) 5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove ...