Votes - 3, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. • This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wethands. • This may cause an electric shock or fire. Use only a properly grounded plug and recepticle. • An improper ground may cause electric shock or equipment damage. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. • Failure to do so may cause an electric shock or fire. Disconnect the plug from the outlet during storms or lightening orif it is not used for a long period of time. • Failure to do so may cause an electric shock or fire. Do not connect too many extension cords or plugs to an outlet. • This may cause a fire. Notational Power Installation Clean Other Do not cover the vents on the monitor cabinet. • Bad ventilation may cause a breakdown or fire. Put your monitor in a location with low humidity and a minimum ofdust. • An electric shock or fire could result inside the monitor. Do not drop the monitor when moving it. • This may cause damage to the product or human body. Place the monitor on a flat and stable surface. • The monitor can cause injury by falling. Set down the monitor carefully. • It could be damaged or broken. Notational Power Installation Clean Other When cleaning the monitor case or the surface of the TFT-LCD, wipe with a slightly moistened, soft fabric. Do not spray detergent directly on the monitor. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. • A dirty connector can cause an electric shock or fire. Do not set a glass of water, chemicals or any small metal objects on the monitor. • This may cause damage, electric shock or a fire. • If a foreign substance gets into the monitor, disconnect the plug and then contact a service center. Notational Power Installation Clean Other Do not remove cover(or back). No user serviceable parts inside. • This may cause an electric shock or a fire. • Refer servicing to qualified service personnel. If your monitor does not operate normally -in particular, if there are any unusual sounds or smells coming from it - unplug itimmediately and contact an authorized dealer or service. • This may cause an electric shock or a fire. Do not place any heavy objects on the monitor. • This may cause an electric shock or a fire. For each hour of looking at the monitor, you should let your eyes rest for 5 minutes. • This will reduce eye fatigue. Do not use or store inflammable substances near the monitor. • This may cause an explosion or fire. Do not try to move the monitor by pulling on the wire or the signalcable. • This may cause a breakdown, electric shock or a fire due to damage to the cable. Do not move the monitor right or left by pulling only the wire or the signal cable. • This may cause a breakdown, electric shock or a fire due to damage to the cable. Never insert anything metallic into the monitor openings. • This may cause an electric shock, fire or injury. SyncMaster 181T SyncMaster 181T Unpacking Front Rear Monitor and Stand Power Cord Signal Cable DVI Cable Quick Setup Guide Pivot Stand and S/W CD(Option) Warranty Card (Not available in all locations) User's Guide and Driver Installation CD Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. SyncMaster 191T Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. General Unpacking Front Monitor and Stand Rear Pivot Stand and S/W CD(Option) For Multimedia model (Option) Power Cord Signal Cable DVI Cable(Option) Quick Setup Guide Warranty Card (Not available in all locations) User's Guide and Driver Installation CD Multimedia Speaker Stand Sound Cable (Simple Stand or Pivot Stand & Pivot Software) SyncMaster 171N Unpacking Front Rear Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. General Monitor and Stand Power Cord Signal Cable Quick Setup Guide For Multimedia model (Option) Warranty Card Pivot Stand and S/W CD(Option) (Not available in all locations) User's Guide and Driver Installation CD Multimedia Speaker Stand Sound Cable (Simple Stand or Pivot Stand & Pivot Software) SyncMaster 171S Unpacking Front Rear Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. General Monitor and Stand Power Cord Signal Cable Quick Setup Guide For Multimedia model (Option) Warranty Card Pivot Stand and S/W CD(Option) (Not available in all locations) User's Guide and Driver Installation CD Multimedia Speaker Stand Sound Cable (Simple Stand or Pivot Stand & Pivot Software) SyncMaster 181T/191T Unpacking Front Rear 1.Analog(A)/Digital(B)When push the 'Exit' button, then Selects the Video signal(A or B)while indicat...