Votes - 3, Average rating: 4
(
)
)
|
manual abstract
Warm-up Time All LCD monitors need time to become thermally stable whenever you turn on the monitor after letting the monitor be turned off for a couple of hours. Therefore, to achieve more accurate adjustments for parameters, allow the LCD monitor to warm (be on) for at least 20 minutes before making any screen adjustments. English 7 4_E150MP170MPbody.fm Page 8 Wednesday, September 19, 2001 2:54 PM Adjusting Your LCD Monitor User Controls Your LCD monitor allows you to easily adjust the characteristics of the image being displayed. All of these adjustments are made using the control buttons on the front of the monitor. While you use these buttons to adjust the controls, an on-screen menu shows you their numeric values as they change. CHMenuExitPIPSourceTVV2V1PC VOL * 17" : SyncMaster 170MP Figure 6. User control locations No. Name Description 1 Source Selects Video source. Four source indicator LEDs on the left of the control button indicate currently active Video source. 2 PIP Activates PIP(Picture-in-Picture) window directly. PIP to Fullscreen video. PIP off. 3 Exit Exits from menus and sub-menus. Exits from the OSD system. Turns the PIP off. 4 Menu Opens the OSD and selects the highlighted function. 5 Power Turns ON/OFF the monitor. Indicates the status of the monitor. -Green : Normal Operation. -Amber : Power Saving Mode or Disconnected Signal Cable. English 8 4_E150MP170MPbody.fm Page 9 Wednesday, September 19, 2001 2:54 PM Adjusting Your LCD Monitor No. Name Description 6 Moves the selector up or down on the OSD. - CH + Increases or decreases the channel number. 7 Moves the selector left or right on the OSD. Increases or decreases the values of the selected function. - VOL + Increases or decreases the level of audio volume. Automatic Save Whenever you open the on-screen menu and allow an adjustment window to remain active for about 3 seconds without pressing other buttons, the monitor automatically saves any adjustment you have made. These changes are saved into a user area in the monitor. The monitor can save adjustments for up to 5 user modes. It has 9 for 150MP (11 for 170MP ) factory preset or preload modes, one for each signal frequency as listed in table 7 on page 28. If you have made no adjustments, the on-screen menu disappears and the monitor does not save anything. English 9 4_E150MP170MPbody.fm Page 10 Wednesday, September 19, 2001 2:54 PM Adjusting Your LCD Monitor Direct-Access Features While you are watching full screen TV or in PIP mode Program P_ Valid only after performing "Channel auto program". When OSD is not on the screen, push the " " or " " button to select program channel number. 1 Push the " " button to decrease channel number. 2 Push the " " button to increase the channel number. Volume50 When OSD is not on the screen, push the " " or " " button to adjust volume. 1 Push the " " button to decrease the volume. 2 Push the " " button to increase the volume. OSD Lock/Unlock This function allows you to secure the current settings so that they cannot be inadvertently changed, while still allowing you to adjust the Brightness, Contrast, Channel, and Volume. You can unlock the OSD controls at any time by using the same procedure. With the OSD screen off, push and hold the Menu button for at least 5 seconds to lock or unlock the controls. When locked, a 'LOCKED!' message will be displayed along the bottom of each OSD menu except for these screens : • Brightness • Contrast • Channel • Volume English 10 4_E150MP170MPbody.fm Page 11 Wednesday, September 19, 2001 2:54 PM Adjusting Your LCD Monitor ON-Screen Display(OSD) AUTO AUTO ADJUSTMENT Auto Adjustment Press Menu Key Function icons Function name Setting bar Tool Tip Figure 7. On-Screen Display(OSD) Accessing the menu system With the OSD off, push the Menu button to display the main OSD menu. 1 Use the " " buttons to move from one function to another. As you move 2 from one icon to another, the function name changes to reflect the function or group of functions represented by that icon. See Table 1 starting on the next page to view a complete list of all of the functions available for the monitor. Press the Menu button once to activate the highlighted function, then follow the Tool 3 Tips to select the function and adjust the value. Use " " and " " buttons to select the sub-menu, and press the Menu button once 4 to activate the selected sub-menu. After selecting a function, use the " " and " " buttons to make necessary 5 adjustments. The setting bar moves and the numeric value indicator changes to reflect your adjustments. NOTE: The numeric value indicator is provided as a point of reference only and has nothing to do with a real measurement. Push the Exit button a couple of times to return to the main menu to select another 6 function or to exit from the OSD. English 11 English 12 Adjusting Your LCD Monitor OSD functions and adjustments Table 1. Screen controls Icon Menus and Sub-menus Function Descriptions Auto Adjust...
Other models in this manual:Displays - 170MP (3.78 mb)