|
Photos and specs Samsung TS240C |
manual abstract
The screen will not switch on. Check that the power cable is connected properly. (Refer to "3.2 Connecting and Using a PC") The message "Check Signal Cable" appears. Check that the cable is properly connected to the product. (Refer to "3.2 Connecting and Using a PC") Check that the device connected to the product is powered on. 9610 Troubleshooting Guide Troubleshooting Guide10 Troubleshooting Guide10 Screen issue "Not Optimum Mode" is displayed. This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (104page). The images on the screen look distorted. Check the cable connection to the product (Refer to "3.2 Connecting and Using a PC") The screen is not clear. The screen is blurry. Adjust Coarse(71page) and Fine(72page). Remove any accessories (video extension cable, etc.) and try again. Set the resolution and frequency to the recommended level. (Refer to "11.1 General") The screen appears unstable and shaky. Check that the resolution and frequency for the PC are within the range of resolution and frequency compatible with the product. Next, if required, change the settings, referring to Standard Signal Mode Table (104page) in this manual and the INFORMATION menu on the product. There are shadows or ghost images left on the screen. The screen is too bright. The screen is too dark. Adjust Brightness(66page) and Contrast(67page). Screen color is inconsistent. Change the COLOR settings. (Refer to " Configuring Tint") The colors on the screen have a shadow and are distorted. Change the COLOR settings. (Refer to " Configuring Tint") White does not really look white. Change the COLOR settings. (Refer to " Configuring Tint") There is no image on the screen and the power LED blinks every 0.5 to 1 second. The product is operating in power-saving mode. Press any key on the keyboard or move the mouse to return to normal operating mode. Sound issue There is no sound. Check the connection of the audio cable or adjust the volume. Check the volume. 9710 Troubleshooting Guide Troubleshooting Guide10 Troubleshooting Guide10 Sound issue The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Source device issue A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced. 9810 Troubleshooting Guide Troubleshooting Guide10 Troubleshooting Guide10 10.2 Q & A Question Answer How can I change the Set the frequency on your graphics card. frequency? • Windows XP: Go to Control Panel Appearance and Themes Display Settings Advanced Monitor, and adjust Refresh rate under Monitor settings. • Windows ME/2000: Go to Control Panel Display Settings Advanced Monitor, and adjust Refresh rate under Monitor settings. • Windows Vista: Go to Control Panel Appearance and Personalization Personalization Display Settings Advanced Settings Monitor, and adjust Refresh rate under Monitor settings. • Windows 7: Go to Control Panel Appearance and Personalization Display Screen Resolution Advanced settings Monitor, and adjust Refresh rate under Monitor settings. 9910 Troubleshooting Guide Troubleshooting Guide10 Troubleshooting Guide10 Question Answer How can I change the resolution? • • • • Windows XP: Go to Control Panel Appearance and Themes Display Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. Windows Vista: Go to Control Panel Appearance and Personalization Personalize Display Settings, and adjust the resolution. Windows 7: Go to Control Panel Appearance and Personalization Display Adjust Resolution, and adjust the resolution. How do I set power-saving mode? • • • • Windows XP: Set power-saving mode in Control Panel Appearance and Themes Display Screen Saver Settings or BIOS SETUP on the PC. Windows ME/2000: Set power-saving mode in Control Panel Display Screen Saver Settings or BIOS SETUP on the PC. Windows Vista: Set power-saving mode in Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC. Windows 7: Set power-saving mode in Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC. Refer to the user manual for your PC or graphics card for further instructions on adjustment. 10010 Troubleshooting Guide 11 Specifications 11 Specifications 11.1 General Model Name TS190C TS220C TS240C Panel Size 19 inches (48 cm) 21.5 inches (55 cm) 24 inches (61 cm) Display area 408.2 mm (H) x 255.2 mm (V) / 16.1 inches (H) x 10.0 inches (V) 476.6 mm (H) x 268.1 mm (V) / 18.9 inches (H) x 10.1 inches (V) 518.4 mm (H) x 324.0 mm (V) / 20.4 inches (H) x 12.8 inches (V) Synchronization Horizontal Frequency 30~81kHz Vertical Frequency 56~75Hz Display C...
Other models in this manual:Displays - TS190 (4.45 mb)
Displays - TS190C (4.45 mb)
Displays - TS220 (4.45 mb)
Displays - TS220C (4.45 mb)