Votes - 2, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
By restricting excessive writing into the memory, the FBWF allows you to use the client for a long time. If you request I/O, the FBWF has the client perform its operations using the cache instead of the memory so that the memory can be protected. The data saved in the cache is preserved while the client operates normally. It is removed when it is restarted or exited. To save the changes, you should write the relevant file onto the disk using the commit command. If you don't know which file is changed, disable the FBWF, change it, and enable it again. Installing the Software 4-1 You can control the FBWF using the various options of the fbwfmgr command at a command prompt. • Setting the FBWF • Current FBWF status : Displays the current status of the FBWF (Enabled or Disabled). • Boot command : Displays the FBWF command that will be performed at the next boot-up. • Used memory : Displays the size of the RAM the FBWF is using. If the current status is set to "Disabled", the used memory is displayed as 0 KB. • Maximum memory: Displays the maximum size of the RAM that the FBWF can use. • FBWF Command • Enable the FBWF and restart the system : Enables the disabled FBWF and restarts the client. If the client is not restarted, only the boot command is changed to BWF_ENABLE and the current status is not changed. • Disable the FBWF and restart the system : Disables the enabled FBWF and restarts the client. If the client is not restarted, only the boot command is changed to FBWF_DISABLE and the current status is not changed. • Write the changes to the disk : Even if the disks are protected by the FBWF, you can add or delete the files you want to save on them. To write the changes onto the disk, click the [Write the changes to the disk] button. • Session Status • Current session : Displays the volumes being protected by the FBWF and a list of the folders and files on those volumes that are excepted from protection by the FBWF. • Next session : Select the volumes that will be protected by the FBWF when the client is booted up next time. Also, select the folders and files that you want to except from protection by the FBWF. Windows Media Player The XPe Client includes Windows Media Player 6.4. With Windows Media Player, you can play audio and video files on a website. Control Panel The Windows Firewall The Windows Firewall protects your client further. The Windows Firewall allows you to restrict incoming data to your client from other computers, thus helping to control your client data more effectively. In addition, it also provides a barrier between your client and network connections reducing unauthorized access, viruses, and worms across networks. You can think of a firewall as a sentinel which identifies incoming data from the Internet and other networks. According to the firewall settings, incoming data to your computer is either permitted or rejected. The Windows Firewall is, by default, installed and activated on your client. However, your administrator can turn it off. You can choose and select a different firewall. Therefore, it is not required for you to use the Windows Firewall. Estimate the functions of other firewalls and choose the best one to fit your requirements. To install and run a different firewall, you must turn off the Windows Firewall. 4-1 Installing the Software You must be logged on as administrator to turn the Windows Firewall on or off. Follow these steps to turn the Windows Firewall on or off. 1. Run the Windows Firewall. 2. Click on one of these options under the General tab. • On (recommended) : This is the recommended setting for normal use. • On with no exceptions : This settings blocks all unwanted access to your client, including all requests to programs and services selected in the Exceptions tab. Use this setting when you need to protect your client to the maximum extent. • Off (Not recommended) : Turning off the Windows Firewall may make your client and network more vulnerable to viruses and intruders. Configuring Utilities Local Drive • C Drive The C drive is used for the system. If there is less than 3MB of free space available, the client OS cannot operate. Therefore, always ensure that there is a sufficient amount of free space available. EWF can help maintain available space by preventing the C drive being written to directly. • Saving Files Your client uses a fixed size of flash memory. Therefore, it is better to save files to the server rather than to your client. Mapping a Network Drive The administrator can map a folder to a network drive. To keep the mapping information after restarting the client, take note of these directions carefully. • Select the Reconnect at logon checkbox in the Map Network Drive dialog box. • If the EWF or FBWF is enabled, the changes are saved on the disk. Installing MUI (Multi-language User Interface) The MUI Setup program helps you set up languages on the XPe client. In addition, you can delete an origina...
Other models in this manual:Displays - TC190 (1.56 mb)
Displays - TC190-1 (1.56 mb)