Votes - 2, Average rating: 5
(
)
)
|
manual abstract
POWER IN The power cord plugs into the LCD Display and the wall plug. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port DVI / PC / HDMI IN [PC/DVI/BNC AUDIO IN] (PC/DVI/BNC/HDMI Audio Connection Terminal (Input)) DVI / PC / HDMI IN [HDMI] Connect the HDMI terminal at the back of your LCD Display to the HDMI terminal of your digital output device using a HDMI cable. DVI / PC / HDMI IN [RGB](PC Video Connection Terminal) Using a D-Sub Cable (15 pin D-Sub) -PC mode (Analog PC) Introduction DC OUT DT*]. to the product. DVI / PC / HDMI IN [DVI(HDCP)] (PC Video Connection Terminal) Using a DVI Cable (DVI-D to DVI-D) -DVI mode (Digital PC) Make sure to use connecting DC-OUT terminal to the authorized TV-Tuner Box[SBB- Otherwise, this may result in damage AV IN [VIDEO] (VIDEO Connection Terminal) Connect the [ VIDEO ] terminal of your monitor to the video output terminal of the external device using a VIDEO cable. AV AUDIO IN [L-AUDIO-R](LCD Display Audio Connection Terminal (Input)) AUDIO OUT [L-AUDIO-R](LCD Display Audio Connection Terminal (Output)) RGB OUT (Applicable to the DRN-S model only) LAN (LAN Connection Terminal) (Applicable to the DRN-S model only) USB(USBConnection Terminal) (Applicable to the DRN-S model only) Keyboard / Mouse, Mass Storage Device Compatible. Note See Connecting Cables for further information regarding cable connections. Introduction Remote Control Note The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display , causing a malfunction due to interference with the frequency. Note The TV menu is available when a TV tuner box is installed. POWER OFF Number Buttons DEL button + VOL MUTE TV/DTV MENU INFO Color Buttons TTX/MIX STILL AUTO S.MODE MDC LOCK SOURCE ENTER/PRE-CH CH/P D.MENU GUIDE RETURN Up-Down Left-Right buttons EXIT SRS MagicInfo P.MODE DUAL/MTS Introduction 1. POWER 2. Off 3. Number Buttons 4. DEL button 5. + VOL 6. MUTE 7. TV/DTV 8. MENU 9. 10. INFO 11. Color Buttons 12. TTX/MIX 13. STILL 14. AUTO 15. S.MODE 16. MDC 17. LOCK 18. SOURCE PIP SWAP Turns the product On. Turns the product Off. Press to change the channel. The "-" button operates only for DTV. It is used to select MMS (multi-channel) for a DTV. Adjusts the audio volume. Pauses (mutes) the audio output temporarily. This is displayed on the lower left corner of the screen. The audio resumes if MUTE or - VOL + is pressed in the Mute mode. Selects the TV and DTV mode directly. Opens the on-screen menu and exits from the menu or closes the adjustment menu. Activates a highlighted menu item. Current picture information is displayed on the upper left corner of the screen. Press to add or delete channels and to store channels to the favorite channel list in the “Channel List” menu. TV channels provide written information services via teletext. -Teletext Buttons For more information > TTX / MIX Press the button once to freeze the screen. Press it again to unfreeze. Adjusts the screen display automatically in PC mode. By changing the resolution in the control panel, auto function is performed. When pressing this button, the current mode is displayed at the bottom centre of the screen. The LCD Display has a built-in high fidelity stereo amplifier. Then press the button again to circle through available preconfigured modes. ( Standard > Music > Movie > Speech > Custom ) MDC Quick Launch Button. Activates or deactivates all function keys on both the remote control and the LCD Display except for the Power and LOCK buttons. Press the button to change the input signal SOURCE. Introduction Changing the SOURCE is only allowed for external devices that are connected to the monitor at the time. ENTER/PRE-CH This button is used to return to the immediately previous 19. channel. 20. CH/P In TV mode, selects TV channels. 21. D.MENU DTV menu display 22. GUIDE Electronic Program Guide (EPG) display. RETURN Returns to the previous menu. 23. 24. Up-Down Left-Right but-Moves from one menu item to another horizontally, vertically tons or adjusts selected menu values. Exits from the menu screen. Selects SRS TruSurround XT mode. 25. EXIT 26. SRS 27. MagicInfo MagicInfo Quick Launch Button. 28. P.MODE When you press this button, current picture mode is displayed on the lower center of the screen. AV/HDMI/TV: P.MODE The LCD Display has four automatic picture settings that are preset at the factory. Then push button again to circle through available preconfigured modes. ( Dynamic > Standard > Movie > Custom ) PC/DVI/MagicInfo: M/B (MagicBright) MagicBright is a feature providing the optimum viewing environment depending on the contents of the image you are watching. Then push button again to circle through available preconfigured modes. (Entertain >Internet >Text >Custom ) 29. DUAL/MTS DUALSTEREO/ MONO, DUAL l / DUAL ll and MONO/NICAM MONO/NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watc...
Other models in this manual:Displays - 460DR-S (3.21 mb)
Displays - 460DRN-S (3.21 mb)
Displays - 460DRN-SL (3.21 mb)