Votes - 3, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisy-chain running from 1 to 99, and then finally to Set ID 0. Cloning Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs. You can select specific tab categories or all tab categories for cloning, using the copy setting option window. Command Retry This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC options window. The retry count value must be between 1-10. The default value is 1. Getting Started with MDC 1 To start the program, click Start —► Programs —> Samsung —> MDC Unified. 2 Click Add to add a display device. • If the connection is established via RS232C, go to Serial and specify the COM Port. If the connection is established via Ethernet, enter the IP that was entered for the display device. Add Connection Serial Ethernet I IP Address I 107 . ICS . 12 . 5 I Port Number 1515 I SET !D Range 00 i * 10 C Main Screen Layout Multiple Display Control “ System Tool 6 & O Menu Bar Change the status of a display device or the properties of the program. Device Category View a list of connected display devices or device groups. ^ Schedule Category View a list of schedules for display devices. i Set List Select the display device you want to adjust. Modify the Set List Add, edit, regroup or delete sets. 0 Help Topics Display help topics for the program. Menus You can power on or off a selected device or change the input source or volume of the device. Choose display devices from the list of sets, and select the Home tab. Home Select an item and change the corresponding setting. Power • On: Power on a selected display. • Off: Power off a selected dis Input • Input Source : Change the input source. jjjjT] □ Input sources available can vary depending on the Display Device Models. □ The Input source can be changed only for displays that are turned on. • Channel : Change the channel. jjjjT] □ The TV channel can be changed by using the up/down arrow keys. □ The channel can be changed only when the Input source Is TV. □ Only registered channels can be selected. [2 Volume The volume can be changed or the sound can be muted only for displays that are turned on. Volume □ The volume can be adjusted using the slider bar in the range of 0 to 100. Adjust the volume of a selected display. Input □ Enable or disable Mute for a selected display. Mute will automatically be disabled if Volume is adjusted when Mute is on. r3 Alert • Fault Device □ This menu shows a list of display devices which have following errors - fan error, temperature error, brightness sensor error, or lamp error. Select a display device from the list. The Repair button will be enabled. Click the refresh button to refresh the error status of the display device. The recovered display device will disappear from the Fault Device List. Fault Device Alert □ Display device in which error is detected will be reported by email. Fill in all required fields. The Test and OK buttons will be enabled. Ensure the Sender information and at least one Recipient are entered. Screen Adjustment The screen settings (contrast, brightness, etc.) can be adjusted. Choose display devices from the list of sets, and select the Picture tab. Custom Select an item and change the corresponding screen setting. 1 Picture Mode Dyn ■* 1 Color 0 ► IRed | ► 1 Dynamic Contrast Off ■» 1 Contrast 0 * 1 Tint (G/R) 100« ► 1 Green J_ > 1 Gamma Control 0 (Natural) » 1 Brightness J 0 •> ► [jjjT] • Color and Tint are not available if the input source is PC. • Red, Green, Blue and PC Screen Adjustment are not available if the input source is Video. • Color, Tint, Color Tone, Color Temp, Red, Green, Blue and PC Screen Adjustment are not available if both PC Source and Video Source are selected. Contrast • Adjust the contrast for the selected display device. Brightness • Adjust the brightness for the selected display device. Color • Adjust the colors for the selected display device. Tint (G/R) • Adjust the tint for the selected display device. Color Tone • Adjust the background color tone for the selected display device. Color Temp • Adjust the color temperature for the selected display device. This option is enabled if Color Tone is set to Off. Red • Customize the intensity of red color for the selected display device. Green • Customize the intensity of green color for the selected display device. Blue Customize the intensity of blue color for the selected display device. Options Dynamic Contrast Adjust the Dynamic Contrast for the selected display device. Gamma Control Change the gamma value for the selected display. Auto Motion Plus This option is used to view dynamic images. • Off: Disable the Auto Motion Pl...
Other models in this manual:Displays - 400FP-3 (4.56 mb)
Displays - 460FP-3 (4.56 mb)
Displays - 460MX-3 (4.56 mb)