Chemical screen not in chemical Chemical too thick. Pressure hose is too long Chemical build up in chemical injector. Chemical filter clogged. See How to Use Wand paragraph in the Operation Section. Clean filter. Dilute chemical. Chemical should be the same consistency as water. Lengthen water supply hose instead of pressure hose. Have parts cleaned or replaced by AWSC. Insure end of chemical hose is fully submerged into chemical. No or low Worn seal or packing Have replaced by AWSC. pressure Wo

• Never operate unit in a location occupied by humans or animals. • Some cleaning fluids contain sub• Use only cleaning fluids specifically stances which could cause injury recommended for high pressure to skin, eyes, or lungs. washers. Follow manufacturers recommendations. Do not use chlorine bleach or any other corrosive compound. • Fuel or oil can leak or spill and • If pressure washer is equipped with could result in fire or breathing a fuel shut-off valve, turn the valve RISK OF INJURY haza

Wap KundenCenter Alto Hong Kong Wap cistilni sistemi, 390 South Woods Mill Road Tel. (++49) 0180 Representative SLO-1110 Ljubljana Suite 300 Fax (++49) 0180 / RM 602, Tower B, Letaliska 33 30CA . Chesterfield e-mail: center@wap-70, Ta Chuen Ping Street Tel. (++0368) 61 44 USA-Missouri 63017-3433 Besuchen Sie uns im Internet: Kwai chung Fax (++0368) 61 1 40 42 Tel.: (+1) 31 42 05 12 20 HK-Hong Kong Fax: (+1) 31 42 05 15 44 Tel. (++852) 26 10 10 42 SOUTH AFRICA Wap-Zentrale Bellenberg Fax (++852)

Turn the turret to the desired nozzle. 3. Pull quick connect coupler back and place nozzle into quick connect coupler. 3. Push quick connect coupler over nozzle to secure in place. HOW TO SIPHON CHEMICALS/CLEANING SOLVENTS Siphoning chemicals or cleaning solvents is a low pressure operation. NOTE: Use only soaps and chemicals designed for pressure washer use. Do not use bleach. To siphon chemicals: 1. Press chemical hose onto barbed fitting located near high pressure hose connection of pump as s

Water Flow (GPM) 4.8 4.6 Max. Water Temp (Full Pressure) 176°F 212°F Max. Water Temp (Reduced Pressure) 302°F 302°F Inlet Suction Lift 16 ft. 16 ft. Engine Fuel Consumption (GPH) 0.9 0.8 Burner Fuel Consumption (GPH) (D=122°F) 1.5 1.5 Burner Fuel Tank Capacity 5 Gallons 5 Gallons Engine HP 13 Honda 16 Ruggerini RPM 1750 1750 Nozzle Tornado 05 Tornado 05 Size (L x W x H) 46 x 36 x 34 in. 46 x 36 x 42 in. Weight 484 lbs. 693 lbs. DISTRIBUTED BY: Nilfisk Nilfisk-ALTO Cleaning Systems,

08.01.2007 Nilfisk-ALTO C 120.1 User manual Printed in China Copyright © 2007 Nilfisk-ALTO Index 1 Safety precautions and warnings .............................................3 2 Description ...............................................................................4 3 Before you start using your pressure washer ...........................5 4 Operating your pressure washe ...............................................6 5 Fields of Application and Working Methods ...........................