Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
Improper control of gun/wand can result in injuries to self and others. HAZARD RISK OF INJURY FROM SPRAY WHAT CAN HAPPEN HOW TO PREVENT IT • Always wear ANSI approved Z87 safety glasses.Wear protective clothing to protect against accidental spraying. • Never point wand at, or spray people or animals. • Always secure trigger lock when wand is not in service to prevent accidental operation. • Never permanently secure trigger in pull back (open) position. • High velocity fluid spray can cause objects to break, propelling particles at high speed. • Light or unsecured objects can become hazardous projectiles. CARTON CONTENTS Operation Manual Nozzle Cleaning Tool Chemical Hose Nozzle Holder Quick Connect Nozzles Formed Rubber Covers Engine Frame and Wheel Assembly Engine Manual Bagged Parts Spray Gun High Pressure Hose Engine Oil Quick Connect Spray Wand Handle ASSEMBLY INSTRUCTIONS 1. Place handle assembly onto frame, depress the snap buttons, and slide the handle assembly onto the frame until snap buttons snap into place. 6. Slide the formed rubber covers onto the handle's on-board hose and wand storage. 7. Add engine oil (supplied) to engine. Refer to Engine Owners Manual supplied by engine manufacturer for correct procedure. NOTE: There will be a slight amount of oil in the engine from factory testing. 2. Attach high pressure hose to gun. Tighten securely. 3. Connect wand to gun. Tighten securely. NOTE: The high pressure pump was filled with oil at the factory. There is no need to add oil at this time, see the Maintenance section of this manual for Maintenance information. 4. Place the nozzle holder onto the panel (located on the handle assembly) and push each nozzle holder into place. 5. Remove five colored quick connect nozzles from plastic bag and insert them into correct grommet on the nozzle holder. NOTE: Nozzles are color coded to match colored nozzles on panel. OPERATING INSTRUCTIONS Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Spray Gun High Pressure Hose Engine Quick Connect Spray Wand High Pressure Pump BASIC ELEMENTS OF A PRESSURE WASHER High Pressure Pump: Increases the pressure of the water supply. Engine: Drives the high pressure pump. High Pressure Hose: Carries the pressurized water from the pump to the gun and spray wand. Spray Gun: Connects with spray wand to control water flow rate, direction, and pressure. Quick Connect Spray Wand: Allows the user to quickly change out high- pressure nozzles. See How To Use Spray Wand instructions in this section. Chemical Hose (not shown): Feeds cleaning agents into the pump to mix with the water. See How To Apply Chemicals/Cleaning Solvents instructions in this section. BASIC ELEMENTS OF AN ENGINE Refer to the engine manual for location and operation of engine controls. Choke Control: Opens and closes carburetor choke valve. Throttle Control Lever: Controls engine speed. Starter Gr...
Other models in this manual:Pressure Washers - A07708-0412-0 (2.04 mb)
Pressure Washers - A07708-0412-0 (2.04 mb)
Pressure Washers - A07708-0412-0 (2.04 mb)
Pressure Washers - A07708-0412-0 (2.04 mb)