Votes - , Average rating:
(
)
)
Manafacture: Nilfisk-ALTO
File size: 291.96 kb
File name: 3267262a-9f9a-4280-9865-36a42e8e2090.pdf
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
manual abstract
9 - 16 Betriebsanleitung ................................... 17 - 24 Printed in Denmark Copyright © 2008/2009 Nilfisk-ALTO Congratulations Congratulations on your choice of new cold water cleaner. We are sure that it will live up to your expectations. To ensure that you obtain the best possible results from your new cleaner we ask you to read this instruction manual carefully before use. Yours faithfully Nilfisk-ALTO, Division of Nilfisk-Advance A/S Index EN 1.0 Guarantee .................................................9 1.1 Owners responsibility ......................... 9 1.2 Use in hazardous areas ......................9 2.0 Key photo................................................10 3.0 Connections ...........................................11 3.1 Water connection ............................. 11 4.0 Standard equipment ............................. 11 5.0 Operation ................................................12 5.1 Starting-up procedure .......................12 5.2 Stopping ............................................12 6.0 Frost proofi ng ........................................ 12 7.0 Maintenance ...........................................13 7.1 Changing of oil ..................................13 7.2 Sludge container ...............................13 7.3 Water filter ........................................ 13 7.4 Couplings ......................................... 13 8.0 Safety ......................................................13 9.0 Maintenance, Instructions manual for the attachment of an air motor........14 9.1 Construction ......................................14 9.2 Installation .........................................14 9.3 Lubrication ........................................14 9.4 Operation ..........................................14 9.5 Servicing ...........................................14 10.0 Model designation .................................15 11.0 Diagnosis of faults and repair ..............15 12.0 Technical data ........................................16 "DET NORSKE VERITAS" CERTIFICATE: Rules for Mobile Offshore Units ............... 25-27 1.0 Guarantee EN Your new Nilfisk-ALTO cold water high pressure cleaner is guaranteed for 12 months from date of pur chase. The guarantee covers defects which can be ascribed to defects in material or workman ship. The guarantee stipulations appear on the enclosed guarantee card, which we kindly ask you to fill in and return to us so that, should the occasion arise, we would be able to help you in the best possible way. 1.1 Owners responsibility To maintain the efficient operation and ensure a long trouble free life from your new Nilfisk-ALTO high pressure cleaner it rests with each operative to handle and operate the cleaner in the correct way. It is important therefore to ensure that the in struc tion manual is made available to each operative and that it is always to hand in order that he may read the operating instructions and in particular the safety requirements (section 8.0). 1.2 Use in hazardous areas This high pressure cleaner model 03KOS has been approved by “DET NORSKE VERITAS” for use in hazardous areas classified as zone 1 and 2 as the models comply with the requirements of “DET NORSKE VERITAS’s Rules for Mobile Offshore Units, Part 5, Chapter 3". (See certificate page 25-27). The approval appears from the model tag of the cleaner. Even though the above-mentioned cleaners have been approved for use in hazardous areas, Nilfisk- ALTO still recommends the users to observe all necessary precautions when using mobile high pressure cleaners in hazardous areas. Furthermore it should be emphasized that the users are responsible for the examination and observance of other national and international requirements of any kind. 2.0 Key Photo EN 2603KLU 1. Pump with bracket 2. Manometer 3. Chassis 4. Exhaust filter 5. Lubricating device 6. Manometer 7. Regulating valve 8. Filter 9. Air motor 10. Belt tightener 11. Water inlet 12. Belt guard 13. V-belt 14. Sludge container 15. Water outlet 3.0 Connections EN 3.1 Water connection The water input is connected at the back of the machine. The machine can be connected directly to the mains water supply, or it can work as a self- priming unit*). For direct water connection the inlet hose must be at least 6 m long, and the water temperature must not exceed 85°C. Please note that connection to the public water supply may entail mounting of a fl oat cham ber. If there is sand or other impurities in the water, it is advisable to provide an external water filter in addition to the internal filter situated behind the quick coupling. For connection of air motor, see section 9.0. *) With cold water (up to 8°C) the cleaner will operate satisfactorily with up to a 5 metre diffe rence of level between cleaner and water supply. The pump and the inlet hose must be connected to the water supply before starting up. When working with hot water (85°C) the cleaner must be below or on a level with the point of ...