Votes - 4, Average rating: 4.3
(
)
)
|
manual abstract
2 1. Hi-Lo Speed Selector 2. Speed Control 3. Burst of Speed Button 4. Beater Eject Button 5. Beaters 6. Stainless Steel Bowl 7. Tilt Button 8. Hand Mixer Release Button 9. Bowl Speed Control Dial 10. Hand Mixer 11. Base Stand 12. Dough Hooks 13. Plastic Bowl 14. Bowl Lid 15. Spatula OPERATING INSTRUCTIONS 1. Place the base of the mixing bowl onto the turntable of the stand. To fully lock the mixing bowl in place, press down and turn the mixing bowl in a clockwise direction until you hear it click into place. (Fig. 9) Fitting the Bowl onto the Turntable of the Stand 1. Before plugging the hand/stand mixer into the electrical outlet, assemble the unit with the desired accessories. 2. Set the speed selector switch to the “ HI” or “ LO” position. 3. Select the speed that you desire. 5 Using the Convertible Hand/ Stand Mixer 12141315 Fig. 92. To remove the mixing bowl from the stand, press down and turn the mixing bowl counter clockwise. The mixing bowl can now be detached from the turntable and lifted away. (Fig. 10) Fig. 10Note: It is easier to fit the mixing bowl to the turntable when the hand mixer is not attached to the pivot support. MIXING GUIDE“HI” 9 & 10 or BURSTWhipping & Aerating“HI” 6 - 8 or “LO” 5Creaming & Beating“LO” 3 & 4Light Mixing“LO” 1 & 2Folding & BlendingRECOMMENDED SPEED(S) MIXING TASK4. Select the bowl speed –“ LO” or “ HI” depending on how fast you want the bowl to turn. Use the “ LO” bowl speed for mixing speed 1- 5. Use the “ HI” bowl speed for mixing speed 6-10. If you do not wish the bowl to turn, leave the bowl speed in the “ OFF” position. Note: • Always select the speed setting before the mixing bowl speed to prevent ingredients from being flicked out of the mixing bowl. • Always start mixing at slow speeds and increase the speed gradually to prevent the ingredients splashing out of the bowl. Warning: To avoid injury when assembling the hand mixer to the stand, always set the speed selector on “ 0” and unplug the appliance. Warning: To avoid injury when assembling the hand mixer to the stand, always set the speed selector on “ 0” and unplug the appliance. Read all the sections of this booklet and follow all the instructions carefully. 3 OPERATING INSTRUCTIONS 1. Before using your BravettiConvertible Hand/Stand Mixerfor the first time, wash the beaters, dough hooks, bowls and spatula in warm, sudsy water. Rinse and dry thoroughly. Use a damp cloth to wash over the mixer base and the hand mixer. Dry with a soft cloth. NEVER immerse the base stand or the hand mixer in water or any other liquids. 2. Before assembling your Convertible Hand/Stand Mixer, make sure that the power cord is unplugged from the electrical outlet and that both the speed control and the base speed control dial are in the “ OFF” position. 1. Ensure that the hand mixer is not plugged in to an electrical outlet and that the speed control switch is on the “ 0” (off) position. 2. Insert the beaters into the sockets on the under side of the hand mixer and twist counter clockwise until the beater is firmly fitted into the socket. 3. To release the beaters from the unit, press on the beater eject button on the front of the unit and they will pop out. (Fig. 1) Attaching the Beaters to the Hand Mixer OPERATING INSTRUCTIONS Assembling the Hand Mixer to the Stand Note: Ensure that the two retaining prongs on the support pivot are fully connected into the hand mixer. 4 1. Ensure that the hand mixer is not plugged in to an electrical outlet and that the speed control switch is on the “ 0” (off) position. 2. The dough hooks have a set method of fitting into the hand mixer because they are not identical. One has a grommet and the other does not. (Fig. 2) Attaching the Dough Hooks to the Hand MixerGrommet 3. Looking at the under side of the hand mixer, you will see that one of the sockets has a red dot over it. (Fig. 3) Insert the dough hook with the grommet into this socket. Grommet 4. Then insert the other dough hook into the other socket. Push both dough hooks in until you hear a click confirming that they are securely in place. 5. To release the dough hooks from the unit, press on the beater eject button on the front of the unit they will pop out. (Fig. 1) Note: Ensure that the beaters or dough hooks are fully inserted into the correct sockets your mixing results may be affected.Fig. 2Fig. 3 Warning: To avoid injury when inserting or removing beaters or dough hooks, always set the speed selector on “ 0” and unplug the appliance. Press eject buttonFig. 1 1. Press the tilt button, located on the top of the support pivot . While the button is depressed, ease the support pivot back. (Fig. 4) Warning: To avoid injury when assembling the hand mixer to the stand, always set the speed selector on “ 0” and unplug the appliance. SupportPivotFig. 4Tilt ButtonThe support pivot will lock into this raised position until it is released by pressing the tilt button again. 2. To connect the hand mixer to the support pivot, locate the two ret...