Votes - 4, Average rating: 3.8 ( )

Manafacture: Bosch File size: 2.34 mb File name: Language of manual:

113-M1984 Fans and Ventilators • CAN/CSA-C22.2 No. 61-M89 Household Cooking Ranges It is the responsibility of the owner and the installer to determine if additional requirements and/or standards apply to specific installations. Before you plug in an electrical cord, be sure all controls are in the OFF position. If required by the National Electrical Code (or Canadian Electrical Code), this appliance must be installed on a separate branch circuit. Installer - show the owner the location of the circuit breaker or fuse. Mark it for easy reference. Important - Save these instructions for the local electrical inspector's use. Before installing, turn power OFF at the service panel. Lock service panel to prevent power from being turned ON accidentally. Refer to data plate for more information. See "Data Plate" under "Service" for data plate location. English 1 m Important Safety Instructions READ AND SAVE THESE INSTRUCTIONS Be sure your appliance is properly installed and grounded by a qualified technician. Installation, electrical connections and grounding must comply with all applicable codes. Related Equipment Safety Remove all tape and packaging before using the appliance. Destroy the packaging after unpacking the appliance. Never allow children to play with packaging material. Never modify or alter the construction of the appliance. For example, do not remove leveling legs, panels, wire covers or anti-tip brackets/screws. Transport To avoid damage to the oven vent, use the transport method shown in the picture below. English 2 Preparation Before you Begin Tools and Parts Needed • Phillips head screwdriver • Measuring tape • Drill with bit (1/8") Parts Included • Phillips head screws (6) 27” Appliances General Information Power Requirements The outlet must be properly grounded in accordance with all applicable codes. Dimensions for 27” Wall-Mounted Units 251/2" 27" (686mm) 2413/16" (630mm) 237/8" (606mm) 22" (559mm) 291/16" (738mm) 263/4" (680mm) (648mm) 281/4" (718mm) min. 43/4" (121mm) max. 313/8" (797mm) 24" (610mm) Single Oven 27” It is good practice, when oven is installed at the end of a cabinet run, adjacent to a perpendicular wall or cabinet door, to allow at least 1/4” space between the side of the oven and the wall/door. For oven support, install 2x4’s extending front to back flush with the bottom and the side of the opening. The supporting base must be well secured to the floor/cabinet and level. Note: The conduit box must be installed either above or below the unit. If the conduit box is installed below the unit, a 2” diameter hole or space is required between the back wall and the right rear of the 2x4 supports. The cabinet base must be flat and capable of supporting a weight of at least 210 lbs (95 kg). English 3 251/2" 263/4" (648mm) 24" (610mm) 511/8" (1299mm) 93/4" (248mm) 237/8" (606mm) 22" (559mm) 513/4" (1314mm) (680mm) 493/4" (1264mm) 2413/16" (630mm) 251/2" 263/4" (648mm) 24" (610mm) 491/2" (1257mm) 191/2" (500mm) 237/8" (606mm) 22" (559mm) 50" (1270mm) 483/8" (1229mm) (680mm) 2413/16" (630mm) Double Oven 27” It is good practice, when oven is installed at the end of a cabinet run, adjacent to a perpendicular wall or cabinet door, to allow at least 1/4” space between the side of the oven and the wall/door. For oven support, install 2x4’s extending front to back flush with the bottom and the side of the opening. The supporting base must be well secured to the floor/cabinet and level. Note: The conduit box must be located above the unit to facilitate connecting and servicing. The cabinet base must be flat and capable of supporting a weight of at least 355 lbs (161 kg). Combo Oven with Microwave 27” It is good practice, when oven is inst...

Download now

Please, enter two numbers from picture: