Votes - 4, Average rating: 4.3
(
)
)
|
manual abstract
To operate the radio: 1. Plug the unit in. 2. Set the FUNCTION selector to Radio. 3. Extend the telescope antenna. 4. Select AM, FM or FM Stereo reception band. 5. Use the Tuning buttons to select the desired station. 6. Adjust antenna for best reception. Note: When tuning FM stereo stations the FM indicator will light when an FM stereo station is tuned in continued on page 7 Memory Display CH 89.90 _ _ FM MHz Memory Display CH 89.90 1 MHz FM 6 CD Function The CD player will accept both 12 cm and 8 cm discs and will read CD, CD-R and CD-RW formats. • Before opening the CD door (18) the LCD will show dashed lines. Open the CD door and the LCD display will show ‘Open’. Insert a CD, close the door and the LCD will display the number of tracks and total play time of the disc. • Press the ‘PLAY/PAUSE button’ (19) to play the CD and the LCD display will flash while reading the disc. Then it will show track 1 and the elapsed playing time. • To Pause press the ‘PLAY/PAUSE’ button (19) while the disc is playing, the playing time will flash. Pressing the ‘PLAY/PAUSE’ button again will start the disc again from where it paused. • To select a track to play, press the ‘SKIP FORWARD’ ..| (20) or ‘SKIP BACKWARD’ |.. (21) button either from ‘Stop’ or ‘Pause’. Each press will change the track number by one. • If the CD is playing, pushing and holding the ‘SKIP’ ..| button will advance through the current track until it is over, then proceed to advance through the next track as long as the button is held down. Conversely, pushing and holding the ‘SKIP’ |.. button will scan in the reverse direction through the track currently playing and continue through previous tracks as long as the button is held down. • To stop playing the disc, press the ‘STOP’ button (22). Repeat Playing • To repeat one track, press the ‘REPEAT’ button (23) one time either while playing or in pause. • To replay all tracks, press the ‘REPEAT’ button a second time either while playing or in pause. • A third press of the ‘REPEAT’ button will cancel the repeat command. continued page 8 AFTER READING TOC READING TOC TRACK 45:06 1 1 ———— — — PLAYING TRACK 1 SEARCHING TRACK 1 TRACK TRACK -- : -- 1 1 0 : 01 1 ONE TRACK REPEAT (FLASHING) REPEAT TRACK 4 : 05 5 Visit us online at califone.com 7 Memory Programming Up to 16 tracks can be programmed. With the CD stopped press the ‘PROGRAM’ button one time. Select a track to play by pushing the ‘Skip Forward’ ..| or ‘Skip Back’ |.. button. Push the ‘PROGRAM’ button again to enter another track to save in memory. When finished, press the ‘PLAY/PAUSE’ button to start the program. Pressing ‘STOP’ at any time exits the Program function. Note: When the CD door is opened all programming is cleared. Random Play Function Pressing the ‘RANDOM’ button (24) during CD play or stop condition will engage random play. Pressing again will cancel the function. Note: If the CD has memory programmed, the random function cannot operate until the program is cleared. Play Time Mode Pressing the ‘PLAY TIME’ button (25) changes the time format on the LCD from elapsed time of each track to the total time remaining on the CD. Compact Disc Player Operation The 2395IR Programmable Compact Disc Player plays both 12cm and 8cm CDs, CD-R, CD-RW without requiring an adapter. Up to 20 tracks can be programmed for play. Loading a Compact Disc 1. Lift to open the CD door and see “OPEN” on the LCD display. 2. Place a CD in compartment with label side up. 3. Press the CD door down to close. Compact Disc Play To play a loaded CD: 1. Turn power ON. 2. Set the FUNCTION Selector to CD. To pause while playing CD Press the PLAY/PAUSE button again. The pause indicator “II” will appear on the display. Press PLAY/PAUSE again to resume play. To stop playing CD Press the STOP button. The Display shows, “—”. Note: When you press PLAY again the Player will return to the first song. The Display will show “00” and then “01”. To skip forward or backward from track to track during playback Press the (SKIP ..|) button once and the next track will be displayed and begin playing. Press repeatedly to move forward to the desired track. Press the (SKIP |..) button once to return to the beginning of the current track. Press repeatedly to skip back to earlier tracks. Playback resumes from the selected track. continued page 9 PROGRAM INPUT COMPLETE CHOOSE TRACK 4 PROGRAM INPUT MODE TRACK MEMORY MEMORY TRACK MEMORY TRACK Pr:02 _ _ Pr:01 04 Pr:01 _ _ 3. The LCD will show the number of tracks and playing time. 4. Press the PLAY/PAUSE button. The CD Display will show the current track and playing time. 8 CD Function continued To search forward or backward to a particular point on a track during playback Press and hold the (SKIP|..) or (SKIP ..|) buttons to search forward or backward through the current track. Playback resumes at the point you release the button. Program Playback Up to 20 tracks can be programmed for playback. To program a song sequence: 1. Press STOP first if the CD i...