Table of ContentsMZJ19AI Motherboard Layout .........................................................................................4Chapter 1 Hardware

B-1. Ful -size Mini-PCIe Slot: For Half-size PCIe-Cards, Please Use the Provided Plate Adapter as ShownD. SATA 3Gbps HDD: How to install 2.5” HDDFür

Table of ContentsBox Contents ...................................................................................................................4MZBAYAI

Processor Configuration（处理器配置） Pre-Socket Configuration（预插座配置） 按 [Enter] 执行高级项目配置。 Processor Socket（处理器插座）/Processor ID（处理器ID）/Processor

2-3-1 Processor Configuration .........................................................................................762-3-1-1 Pre-Socket Configuration

Options available: Enabled/Disabled. Default setting is Enabled. RAID Option ROM UI banner Options available: Enabled/Disabled. Default setting is Enabled. IRRT Only on ESATA Options available: Enabled/Disabled. Default setting is Enabled. Smart Response Technology Enable/Disable Intel Smart Response Technology support function. Options available: Enabled/Disabled. Default setting is Enabled. RAID OROM prompt delay Options available: 2 Seconds/4 Seconds/6 Seconds/8 Seconds. Default setting is 2

Definition 1 VCC3 21 A5P_C 2 VCC 22 A4P_C 3 VCC3 23 A5M_C 4 VCC 24 A4M_C 5 SPC0 25 GND 6 SPD0 26 GND 7 GND 27 A7P_C 8 GND 28 A6P_C 9 A1P_C 29 A7M_C 10 A0P_C 30 A6M_C 11 A1M_C 31 GND 12 A0M_C 32 GND 13 GND 33 CLK2P_C 14 GND 34 CLK1P_C 15 A3P_C 35 CLK2M_C 16 A2P_C 36 CLK1M_C 17 A3M_C 37 GND 18 A2M_C 38 NC 19 GND 39 +12V 20 GND 40 +12V Hardware Installation DEBUG PORT 18) JRS6 (LVDS Enable/Disable Jumper) 1-2 Close: Enable LVDS funciton. (Default setting) 1 1 2-3 Close: Disable LVDS funciton. Pin N

The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected, the computer will not start. To meet expansion requirements, it is recommended that a power supply that can withstand high power consumption be used (500W or greater). If a power supply is used that does not provide the required power, the result can lead to an unstable or unbootable system. Pin No. Definition 1 GND 2 GND 3 +12V 4 +12V Pin No. Definition 1 GND 2 GND 3 VIN_IN 4 VIN_IN 5 GND 6 GN

2-3-2-3 CPU T State Control（CPU T 状态控制） . . . . . . . . . . . . . . . . . . . . . . . . . . . .732-3-3 Common RefCode Configuration（通用 RefCode 配置） . . . . . . .