Votes - 0, Average rating: 0
(
)
)
|
manual abstract
&&CPU/System SMART FAN Control Enable CPU/System Smart Fan function. Option available: Enabled/Disabled. Default setting is Enabled. &&SYS FAN Type Select system fan type. Option available: 3 Pin/4 Pin. Default setting is 3 Pin. &&System/CPU Temperature Displays current system and CPU temperature. &&System/CPU Fan Speed (RPM) Displays current system and CPU and system fan speed. 2-3 Chipset Menu &&Onboard Audio Device Enable/Disable onboard audio controller. Options available: Enabled/Disabled. Default setting is Enabled. &&DMIC Support Define the Verb Table. Mode A does not support DMIC. Mode B supports DMIC. Options available: Disabled/Enabled. Default setting is Disabled. &&Restore AC Power Loss This option provides user to set the mode of operation if an AC / power loss occurs. Power On: System power state when AC cord is re-plugged. Power Off: Do not power on system when AC power is back. Last State: Set system to the last sate when AC power is removed. Options available: Power On/Power Off/Last State. Default setting is Power Off. &&Onboard LAN1/LAN2 Device Enable/Disable onboard LAN1/LAN2 controller. Options available: Enabled/Disabled. Default setting is Enabled. &&DeepSx Power Policies Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled) &&XHCI Mode Allows you to determine the operating mode for the xHCI controller in OS. Smart Auto: This mode is available only when the BIOS supports the xHCI controller in the pre-boot environment. This mode is similar to Auto, but it adds the capability to route the ports to xHCI or EHCI according to setting used in previous boots (for non-G3 boot) in the pre-boot environment. This allows the use of USB 3.0 devices prior to OS boot. xHCI controller enabling and rerouting should follow the steps in Auto, when previous boot routs ports to EHCI. Note: This is the recommended mode when BIOS has xHCI preboot support. Auto: BIOS routes the sharable ports to EHCI controller. Then it uses ACPI protocols to provide an option to enable the xHCI controller and reroute the sharable ports. Note: This is the recommended mode when BIOS does NOT have xHCI pre-boot support. (Default) &&BIOS Lock Enabled and disable BIOS lock. Note: For AMT Feature, must enable it. (Default: Disabled) &&Intel ME FW Update Enable and disable update capability of ME FW. (Default: Disabled) Note: After setting changed, must power off system once to active ME FW update capabgbility. 2-4 Boot Menu The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if the drive(s) specified is not bootable. &&Setup Prompt Timeout Number of seconds to wait for setup activation key. &&Bootup NumLock State Allows you to select power-on state for NumLock function. Options available: On/Off. Default setting is On. &&Quiet Boot If enabled, the system will speed the boot up time. Options available: Enabled/Disabled. Default setting is Disabled. &&Boot Option Priorities Specifies the overall boot order from the available devices. For example, you can set hard drive as the first priority (Boot Option #1) and DVD ROM drive as the second priority (Boot Option #2). The list only displays the device with the highest priority for a specific type. For example, only hard drive defined as the first priority on the Hard Drive BBS Priorities submenu will be presented here. Removable storage devices that support GPT format will be prefixed with "UEFI:" string on the boot device list. To boot from an operating system that supports GPT partitioning, select the device prefixed with "UEFI:" string. Or if you want to install an operating system that supports GPT partitioning such as Windows 7 64-bit, select the optical drive that contains the Windows 7 64-bit installation disk and is prefixed with "UEFI:" string. ``CSM parameters &&Launch CSM Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process. Enabled Enables UEFI CSM. (Default) Disabled Disables UEFI CSM and supports UEFI BIOS boot process only. &&Boot option filter Allows you to select which type of operating system to boot. UEFI and Legacy Allows booting from operating systems that support legacy option ROM or UEFI option ROM. (Default) Legacy only Allows booting from operating systems that only support legacy Option ROM. UEFI only Allows booting from operating systems that only support UEFI Option ROM. This item is configurable only when Launch CSM is set to Enabled. &&Launch PXE OpROM policy Allows you to select whether to enable the UEFI or legacy option ROM for the LAN controller. Do not launch Disables option ROM. (Default) Legacy only Enables legacy Option ROM only. This item is configurable only when Launch CSM is set to Enabled. &&Launch Storage OpROM policy Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller. Do not launch Disables option ROM. Legacy Only Enables legacy option RO...