••When the system is not stable as usual, select the Load Optimized Defaults item to set your system to its defaults. ••The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS version. ..The Functions of the and keys (For the Main Menu Only) . F11: Save CMOS to BIOS This function allows you to save the current BIOS settings to a profile. You can create up to 8 profiles (Profile 1-8) and name each profile. First enter the profile name (to erase the default profile name, use the SPACE key) and then press to complete. . F12: Load CMOS from BIOS If your system becomes unstable and you have loaded the BIOS default settings, you can use this function to load the BIOS settings from a profile created before, without the hassles of reconfiguring the BIOS settings. First select the profile you wish to load, then press to complete. 2-3 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2012 Award Software MB Intelligent Tweaker(M.I.T.) Item Help Menu Level . } IGX Configuration [Press Enter] CPU Clock Ratio [Auto] 2800Mhz CPU NorthBridge Freq. [Auto] 2000Mhz Core Performance Boost (Note) [Enabled] CPB Ratio (Note) [Auto] 3100Mhz Turbo CPB (Note) [Disabled] CPU Host Clock Control [Auto] x CPU Frequency(MHz) 200 PCIE Clock(MHz) [Auto] HT Link Width [Auto] HT Link Frequency [Auto] 2000Mhz Set Memory Clock [Auto] x Memory Clock x6.66 800Mhz } DRAM Configuration [Press Enter] ******** System Voltage Optimized ******** System Voltage Control [Auto] x NorthBridge Volt Control Auto x SouthBridge Volt Control Auto x DDR3 Voltage Auto x CPU Voltage Control Auto x CPU NB VID Control Auto Normal CPU Vcore 1.4125V Normal CPU Vcore NB 1.2000V ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults ••Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) ••When the System Voltage Optimized item blinks in red, it is recommended that you set the System Voltage Control item to Auto to optimize the system voltage settings. &&IGX Configuration CMOS Setup Utility-Copyright (C) 1984-2012 Award Software IGX Configuration Item Help Menu Level .. Internal Graphics Mode [UMA] UMA Frame Buffer Size [Auto] x Surround View Disabled VGA Core Clock control [Auto] x VGA Core Clock(MHz) 350 ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults &&Internal Graphics Mode Allows you to determine whether to allocate system memory for the onboard graphics controller. Disabled Disables the onboard graphics controller. UMA Allocates memory for the onboard graphics controller from the system memory. (Default) &&UMA Frame Buffer Size Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 128MB, 256MB, 512MB, 1024MB. (Note) This item is present only when you install a CPU that supports this feature. &&Surround View Enables or disables the Surround View function. This option is configurable only when Init Display First under Advanced BIOS Features is set to PEG and an ATI graphics card is installed. (Default: Disabled) &&VGA Core Clock control Allows you to determine whether to manually set the VGA Core clock. (Default: Auto) &&VGA Core Clock(MHz) Allows you to manually set the VGA Core clock. The adjustable range is from 200 MHz to 2000 MHz. This item is configurable only when the VGA Core Clock control option is set to Manual. &&CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being used. &&CPU NorthBridge Freq. Allows you to alter the North Bridge controller frequency for the installed CPU. The adjustable range is dependent on the CPU being used. &&Core Performance Boost (Note) Allows you to determine whether to enable the Core Performance Boost (CPB) technology, a CPU performance-boost technology. (Default: Enabled) &&CPB Ratio (Note) Allows you alter the ratio for the CPB. The adjustable range is dependent on the CPU being installed. (Default: Auto) &&Turbo CPB (Note) Allows you to determine whether to improve CPU performance. (Default: Disabled) &&CPU Host Clock Control Enables or disables the control of CPU host clock. Auto (default) allows the BIOS to automatically adjust t...
