Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
This item is configurable only if the VGA Core Clock control option is set to Manual. (Note) This item is present only when you install a CPU that supports this feature. CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being installed. CPU NorthBridge Freq. Allows you to alter the frequency of the CPU North Bridge controller. Core Performance Boost (Note) Allows you to determine whether to enable the Core Performance Boost (CPB) technology, a CPU performance-boost technology. (Default: Enabled) CPB Ratio (Note) Allows you alter the ratio for the CPB. The adjustable range is dependent on the CPU being installed. (Default: Auto) CPU Host Clock Control Enables or disables the control of CPU host clock. Auto (default) allows the BIOS to automatically adjust the CPU host frequency. Manual allows the CPU Frequency (MHz) item below to be configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to default values. CPU Frequency(MHz) Allows you to manually set the CPU host frequency.. This option is configurable only when CPU Host Clock Control is set to Manual. Important It is highly recommended that the CPU frequency be set in accordance with the CPU specifications. PCIe Spread Spectrum Enables or disables PCIe Spread Spectrum. (Default: Disabled) Set Memory Clock Determines whether to manually set the memory clock. Auto lets BIOS automatically set the memory clock as required. Manual allows the memory clock control item below to be configurable. (Default: Auto) Memory Clock This option is configurable only when Set Memory Clock is set to Manual. X5.33 Sets Memory Clock to X5.33. X6.66 Sets Memory Clock to X6.66. X8.00 Sets Memory Clock to X8.00. X9.33 Sets Memory Clock to X9.33. (Note) This item is present only when you install a CPU that supports this feature. DRAM Configuration CMOS Setup Utility-Copyright (C) 1984-2011 Award Software DRAM Configuration Item Help Menu Level . DDR3 Timing Items [Auto] SPD Auto x 1T/2T Command Timing Auto -- -- x CAS# latency Auto 9T 9T x RAS to CAS R/W Delay Auto 9T 9T x Row Precharge Time Auto 9T 9T x Minimum RAS Active Time Auto 24T 24T x TwTr Command Delay Auto 5T 5T x Trfc0 for DIMM2 Auto -- -- x Trfc1 for DIMM1 Auto 110ns 110ns x Write Recovery Time Auto 10T 6T x Precharge Time Auto 5T 5T x Row Cycle Time Auto 33T 20T x RAS to RAS Delay Auto 4T 4T x Four Bank Activate Windows Auto -- -- Bank Interleaving [Enabled] ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults DDR3 Timing Items Manual allows all DDR3 Timing items below to be configurable. Options are: Auto (default), Manual. 1T/2T Command Timing Options are: Auto (default), 1T, 2T. CAS# latency Options are: Auto (default), 5T~14T. RAS to CAS R/W Delay Options are: Auto (default), 5T~14T. Row Precharge Time Options are: Auto (default), 5T~14T. Minimum RAS Active Time Options are: Auto (default), 15T~36T. TwTr Command Delay Options are: Auto (default), 4T~8T. Trfc0 for DIMM2 Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns. Trfc1 for DIMM2 Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns. Write Recovery Time Options are: Auto (default), 5T~8T, 10T, 12T, 14T, 16T. Precharge Time Options are: Auto (default), 4T~8T. Row Cycle Time Options are: Auto (default), 20T~54T. RAS to RAS Delay Options are: Auto (default), 4T~8T. (Note) This item is present only when you install a CPU that supports this feature. Four Bank Activate Window Options are: Auto (default), 16T~40T. Bank Interleaving Enables or disables memory bank interleaving. Enabled allows the system to simultaneously access different banks of the memory to increase memory performance and stability. (Default: Enabled) ******** System Voltage Optimized ******** System Voltage Control Determines whether to manually set the system voltages. Auto lets the BIOS automatically set the system voltages as required. Manual allows all voltage control items below to be configurable. (Default: Auto) DDR3 Voltage Control Allows you to set memory voltage. Normal Supplies the memory voltage as required. (Default) 1.025V ~ 2.135V The adjustable range is from 1.025V to 2.135V. Note: Increasing memory voltage may result in damage to the memory or reduce the useful life of the memory. FCH Voltage Control Allows you to set the Chipset voltage. Normal Supplies the Chipset voltage as required. (Default) 0.625V ~ 1.735V The adjustable range is from 0.625V to 1.735V. CPU VDDP Voltage Control Allows you to set the CPU VDDP voltage. Normal Supplies the CPU VDDP voltage as required. (Default) 0.725V ~ 1.835V The adjustable range is from 0.725V to 1.835V. Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU. CPU VCORE NB Control Allows you to set the...