Votes - 0, Average rating: 0
(
)
)
|
manual abstract
for Hard Disks Enabled Enabled S.M.A.R.T. Hard for Disks. Disabled Disabled S.M.A.R.T. Hard for Disks. (Default Value) 50 6VX7B-4X Motherboard • •••• Boot Up Num-Lock On Keypad is number keys. (Default Value) Off Keypad is arrow keys. • •••• Floppy Drive Seek During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks. 360 type is 40 tracks while 720 , 1.2 and 1.44 are all 80 tracks. Enabled BIOS searches for floppy disk drive to determine if it is 40 or 80 tracks. Note that BIOS can not tell from 720, 1.2 or 1.44 drive type as they are all 80 tracks. Disabled BIOS will not search for the type of floppy disk drive by track number. Note that there will not be any warning message if the drive installed is 360. (Default Value) • •••• Password Check Setup Set Password Check to Setup. (Default Value) Always Set Password Check to Always. • •••• Processor Serial Number Disabled Disabled Processor Serial Number. (Default Value) Enabled Enabled Processor Serial Number. 51 BIOS Setup Chipset Features Setup AMIBIOS SETUP –CHIPSET FEATURE CMOS SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved *** DRAM Timing *** Top Performance :Disabled SDRAM Timing by SPD :Disabled SDRAM CAS# Latency :3 DRAM Frequency :Auto C2P Concurrency & Master :Enabled DRAM Integrity Mode :Disabled AGP Mode :4X AGP Comp. Driving :Auto Manual AGP Comp. Driving :CB AGP Aperture Size :64MB ClkGen Spread Spectrum :Center± 0.25% USB Controller :All USB Port USB Legacy Support :Disabled ESC : Quit ^v<>: Select Item F1: Help PU/PD/+/-: Modify F5 : Old Values (Shift)F2 :Color F6 : Load BIOS Defaults F7 : Load Setup Defaults Figure 4: Chipset Features Setup • •••• Top Performance If you wish to maximize the performance of your system, set “Top Performance” as “Enabled”. Disabled Disabled this function. (Default Value) Enabled Enabled Top Performance function. • •••• SDRAM Timing by SPD Disabled SDRAM Timing by SPD Function Disabled. (Default Value) Enabled SDRAM Timing by SPD Function Enabled. • •••• SDRAM CAS# Latency 3 For Slower SDRAM DIMM module. (Default Value) 2 For Fastest SDRAM DIMM module. • •••• DRAM Frequency Auto Set DRAM Frequency to Auto. (Default Value) 66MHz Set DRAM Frequency is 66MHz. 100MHz Set DRAM Frequency is 100MHz. 133MHz Set DRAM Frequency is 133MHz. 52 6VX7B-4X Motherboard 53 • C2P Concurrency & Master Enabled Enabled C2P Concurrency & Master. (Default Value) Disabled Disabled C2P Concurrency & Master. • DRAM Integrity Mode ECC For 72 bit ECC type DIMM Modle. Disabled Normal Setting. (Default Value) • AGP Mode 4X Set AGP Mode is 4X. (Default Value) 1X Set AGP Mode is 1X. 2X Set AGP Mode is 2X. • AGP Comp. Driving Auto Set AGP Comp. Driving is Auto. (Default Value) Manual Set AGP Comp. Driving is Manual. If AGP Comp. Driving is Manual. Manual AGP Comp. Driving : 00~FF • AGP Aperture Size 4MB Set AGP Aperture Size to 4MB. 8MB Set AGP Aperture Size to 8 MB. 16MB Set AGP Aperture Size to 16 MB. 32MB Set AGP Aperture Size to 32 MB. 64MB Set AGP Aperture Size to 64 MB. (Default Value) 128MB Set AGP Aperture Size to 128 MB. 256MB Set AGP Aperture Size to 256 MB. • ClkGen Spread Spectrum Disabled Spread Spectrum Disabled. Center± 0.25% Set Spread Spectrum 0. 25%(Center Spread). (Default Value) Center± 0.5% Set Spread Spectrum 0. 5%(Center Spread). BIOS Setup • •••• USB Controller USB Port 0&1 USB Controller for USB Port 0&1. USB Port 2&3 USB Controller for USB Port 2&3. All USB Port USB Controller for All USB Port. (Default Value) Disabled USB Controller Function Disabled. • •••• USB Legacy Support Keyboard Set USB Legacy Support Keyboard. Keyb+Mouse Set USB Legacy Support Keyboard +Mouse. Disabled Disabled USB Legacy Support Function. (Default Value) 54 6VX7B-4X Motherboard Power Management Setup AMIBIOS SETUP –POWER MANAGEMENT SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved ACPI Sleep Type :S1/POS USB KB Wakeup From S3~S5 :Disabled Video Power Down Mode :Stand By Hard Disk Power Down Mode :Stand By Suspend Time Out(Minute) :Disabled Display Activity :Ignore IRQ3 :Monitor IRQ 4 :Monitor IRQ 5 :Ignore IRQ 7 :Monitor IRQ 9 :Ignore IRQ 10 :Ignore IRQ 11 :Ignore IRQ 13 :Ignore IRQ 14 :Monitor IRQ 15 :Ignore Soft-off by Power Button :Instant off AC Back Function :Memory Modem Use IRQ :4 Modem Ring On/Wake On Lan :Enabled PME Event Wake up :Enabled RTC Alarm Power On :Disabled RTC Alarm Date :15 RTC Alarm Hour :12 RTC Alarm Minute :30 RTC Alarm Second :30 ESC : Quit ^v<>: Select Item F1 : Help PU/PD/+/-: Modify F5 : Old Values (Shift)F2 :Color F6 : Load BIOS Defaults F7 : Load Setup Defaults Figure 5: Power Management Setup • •••• ACPI Sleep type S1/POS Set ACPI Sleep type is S1 (Default Value) S3/STR Set ACPI Sleep type is S3. • •••• USB KB Wakeup From S3~S5 Enabled Enable USB Keyboard Wakeup from system. Disabled Disable USB Keyboard Wakeup from system. (Default Value) • •••• Video Power Down Mode Disabled Disabled Video Power Down Mode Function. Suspend Set Video Power Down Mode to Su...