Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Reset Case Open Status Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous chassis intrusion status and the Case Opened field will show "No" at next boot. (Default: Disabled) Case Opened Displays the detection status of the chassis intrusion detection device attached to the motherboard CI header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to CMOS, and then restart your system. Current Voltage(V) Vcore/DDR2 1.8V/+3.3V/+12V Displays the current system voltages. Current System/CPU Temperature Displays current system/CPU temperature. Current CPU/SYSTEM FAN Speed (RPM) Displays current CPU/system fan speed. CPU Warning Temperature Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS will emit warning sound. Options are: Disabled (default), 60oC/140oF, 70oC/158oF, 80oC/ 176oF, 90oC/194oF. CPU/SYSTEM FAN Fail Warning Allows the system to emit warning sound if the CPU/system fan is not connected or fails. Check the fan condition or fan connection when this occurs. (Default: Disabled) - 47 -BIOS Setup CPU Smart FAN Control Enables or disables the CPU fan speed control function. Enabled allows the CPU fan to run at different speed according to the CPU temperature. You can adjust the fan speed with EasyTune based on system requirements. If disabled, CPU fan runs at full speed. (Default: Enabled) CPU Smart FAN Mode Specifies how to control CPU fan speed. This item is configurable only if CPU Smart FAN Control is set to Enabled. Auto Lets BIOS autodetect the type of CPU fan installed and sets the optimal CPU fan control mode. (Default) Voltage Sets Voltage mode for a 3-pin CPU fan. PWM Sets PWM mode for a 4-pin CPU fan. GA-73PVM-S2 Motherboard - 48 2-9 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2007 Award Software MB Intelligent Tweaker(M.I.T.) ..FSB & Memory Config [Press Enter] Robust Graphics Booster [Disabled] x VGA Core Clock + 1% CPU Clock Ratio (Note) [10X] CPU Voltage Control [Normal] Normal CPU Vcore 1.32500V ........: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Item Help Menu Level.. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) FSB & Memory Config CMOS Setup Utility-Copyright (C) 1984-2007 Award Software FSB & Memory Config Item Help Menu Level.. Parameters Setting Current Value Current CPU Freq, MHz 3600.0 3600.0 FSB-Memory Clock Mode [Auto] x FSB-Memory Ratio Auto x CPU Host Frequency (Mhz) Auto 200.0 Actual CPU Clock (Mhz) 200.0 x Memory Frequency (Mhz) Auto 533.3 Actual Memory Clock (Mhz) 533.3 ........: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Parameters/ Setting/ Current ValueDisplays the following CPU and memory speed. Setting shows the value you manually adjust; Current Value shows the current operating frequency. Current CPU Freq, MHz Displays the CPU speeds. (Note) This item appears only if you install a CPU that supports this feature. - 49 -BIOS Setup FSB-Memory Clock Mode Auto BIOS will automatically set the FSB-Memory clock mode. (Default) Linked Allows you to set FSB speed manually; the memory speed changes proportionally along with the FSB speed. Unlinked Allows you to set FSB speed and memory speed individually. FSB-Memory Ratio This item is configurable only if the FSB-Memory Clock Mode option is set to Linked. Auto BIOS will automatically set the FSB-Memory ratio. (Default) 1:1 Sets FSB-Memory ratio to 1:1. 5:4 Sets FSB-Memory ratio to 5:4. 3:2 Sets FSB-Memory ratio to 3:2. Sync Mode Sets FSB-Memory ratio synchronously. CPU Host Frequency (Mhz) Allows you to manually set the CPU host frequency. This item is configurable only if the FSB- Memory Clock Mode option is set to Linked or Unlinked. The adjustable range is from 100 MHz to 650 MHz. For an 800 MHz FSB CPU, set this item to 200 MHz. For a 1066 MHz FSB CPU, set this item to 266 MHz. For a 1333 MHz FSB CPU, set this item to 333 MHz. Important It is highly recommended that the CPU frequency be set in accordance with the CPU specifications. Actual CPU Clock (Mhz) The value depends on the CPU Host Frequency (Mhz) setting. Memory Frequency (Mhz) This item is configurable only if the FSB-Memory Clock Mode option is set to Unlinked. The first frequency value is adjustable and the second is the c...