to Sat. Jan. to Dec. 1 to 31 (or maximum allowed in the month) 1999 to 2098 ........: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Date (mm:dd:yy) ( ) / Time (hh:mm:ss) ( ) / / / 24 / / (mm) 1 12 (dd) 1 28/29/30/31 (yy) 1999 2098 -31 -BIOS IDE Channel 0 Master, Slave ( / IDE ) IDE HDD Auto-Detection "Enter" IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave / / IDE • None IDE None • Auto BIOS POST IDE ( ) • Manual Access Mode CHS/ LBA/ Large/ Auto ( Auto) IDE Channel 2/3 Master, Slave ( / IDE ) IDE HDD Auto-Detection Extended IDE Drive "Enter" / IDE • Auto Access Mode Capacity BIOS POST IDE ( Large/ Auto ( ) Auto) • None IDE None Cylinder Head Precomp Precompensation Landing Zone Sector Drive A / Drive B ( A:/ B: ) None None 360K, 5.25" 5.25 360KB 1.2M, 5.25" 5.25 1.2MB 720K, 3.5" 3 720KB 1.44M, 3.5" 3 1.44MB 2.88M, 3.5" 3 2.88MB Floppy 3 Mode Support ( 3 Mode Disabled 3 Mode Drive A A: 3 Mode Drive B B: 3 Mode Both A : B: 3 Mode ) GA-8I915PL-G - 32 Halt on ( ) POST No Errors All Errors All, But Keyboard ( ) All, But Diskette All, But Disk/Key Memory ( ) BIOS POST(Power On Self Test) STANDARD CMOS SETUP Base Memory PC 640KB MS-DOS Extended Memory Base Other Memory Module Total Memory -33 -BIOS 2-2 Advanced BIOS Features ( BIOS ) CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Advanced BIOS Features • Hard Disk Boot Priority First Boot Device Second Boot Device Third Boot Device Password Check # CPU Hyper-Threading Limit CPUID Max. to 3 No-Execute Memory Protect ( ) CPU Enhanced Halt (C1E) ( ) CPU Thermal Monitor 2(TM2) ( ) [Press Enter] [Floppy] [Hard Disk] [CDROM] [Setup] [Enabled] [Disabled] [Disabled] [Disabled] [Disabled] Item Help Menu Level• Select Hard Disk Boot Device Priority ........: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults " # " Intel® Pentium® 4 HT Hard Disk Boot Priority ( ) < > < > <+> <-> First / Second / Third Boot Device ( / / ) Floppy LS120 LS120 Hard Disk CDROM ZIP ZIP USB-FDD USB USB-ZIP USB-ZIP USB-CDROM USB USB-HDD USB LAN Disabled ( ) GA-8I915PL-G - 34 Password Check ( ) System CMOS SETUP Setup CMOS SETUP ( ) SETUP CPU Hyper-Threading ( CPU ) Enabled Disabled CPU ( ) Limit CPUID Max. to 3 Enabled ( NT4.0) Disabled ( ) No-Execute Memory Protect ( Enabled No-Execute Memory Protect Disabled ( ) CPU Enhanced Halt (C1E) ( Enabled CPU Enhanced Halt (C1E) Disabled ( ) CPU Thermal Monitor 2 (TM2) ( Enabled CPU Thermal Monitor(TM2) Disabled ( ) ) ) ) ( ) -35 -BIOS 2-3 Integrated Peripherals ( ) CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Integrated Peripherals On-Chip Primary PCI IDE [Enabled] On-Chip SATA Mode [Auto] x PATA IDE Set to Ch.0 Master/Slave SATA Port 0/2 Set to Ch.2 Master/Slave SATA Port 1/3 Set to Ch.3 Master/Slave USB Controller [Enabled] USB 2.0 Controller [Enabled] USB Keyboard Support [Disabled] USB Mouse Support [Disabled] AC97 Audio [Auto] Onboard H/W RAID [Enabled] Onboard H/W LAN [Enabled] Onboard LAN Boot ROM [Disabled] Onboard Serial Port 1 [3F8/IRQ4] Onboard Serial Port 2 [2F8/IRQ3] UART Mode Select [Normal] x UR2 Duplex Mode Half Onboard Parallel Port [378/IRQ7] Parallel Port Mode [SPP] ........: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Item Help Menu Level.. CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Integrated Peripherals Item Help Menu Level• x ECP Mode Use DMA 3 ........: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults On-Chip Primary PCI IDE ( channel PCI IDE ) Enabled channel IDE ( ) Disabled On-Chip SATA Mode Disabled Auto BIOS ( ) Combined On-Chip SATA mode Combined 4 Enhanced On-Chip SATA mode Enhanced 6 Non-Combined On-Chip SATA mode Non-Combined SATA PATA GA-8I915PL-G - 36 PATA IDE Set to Ch.1 Master/Slave PATA IDE Ch. 1 Master/Slave ( ) Ch.0 Master/Slave PATA IDE Ch. 0 Master/Slave SATA Port 0/2 Set to "On-Chip SATA Mode" "PATA IDE Set to" PATA IDE Ch. 1 Master/Slave Ch. 0 Master/Slave SATA Port 1/3 Set to "On-Chip SATA Mode" "PATA IDE Set to" PATA IDE Ch. 0 Master/Slave Ch. 1 Master/Slave USB Controller USB Controller Enabled USB Controller ( ) Disabled USB Controller USB 2.0 Controller USB 2.0 Controller EnabledDisabled USB 2.0 Controller USB 2.0 Controller ( ) USB Keyboard Support ( Enabled Disabled USB USB USB USB ) ( ( ) USB Enabled) USB Mouse Support ( Enabled Disabled USB USB USB USB ) ( ( ) USB Device Enabled) AC97 Audio Auto DisabledAC97 AC97 Audio ( ) Onboard H/W RAID Enabled Disabled RAID ( ) Onboard H/W LAN ( Enabled Disabled LAN )(LAN H/W LAN H/W LAN ) ( ) Onboard LAN Boot ROM ( ) Enabled Disabled ( ) -37 -BIOS Onboard Serial Port 1 ( 1) Auto BIOS 3F8/IRQ4 1 COM 1 3F8 /IRQ4 ( ) 2F8/IRQ3 1 CO...
Login: