Votes - 3, Average rating: 4 ( )

Manafacture: Black & Decker File size: 893.93 kb File name: 369a0c55-119d-4711-bed3-9bc1d307bd41.pdf Language of manual:

Keep proper footing and balance at all times. • USE SAFETY GLASSES AND OTHER SAFETY EQUIPMENT. Use safety goggles or safety glasses with side shields, complying with applicable safety standards and, when needed, a face shield. Also use face or dust mask if operation is dusty. This applies to all persons in the work area. Also use a hard hat, hearing protection, gloves, safety shoes and dust collection systems when specified or required. Safety glasses or the like are available at extra cost at your local dealer or Black & Decker Service Center. • MAINTAIN APPLIANCE WITH CARE. Keep cutting edges sharp and clean for best performance and to reduce the risk of injury. Follow instructions for proper maintenance. Keep handles dry, clean, and free from oil and grease. • AVOID UNINTENTIONAL STARTING. Don.t carry appliance with finger on switch. • DO NOT attempt to remove cut material nor hold material to be cut when blades are moving. Make sure trimmer switch is off when clearing jammed material from blades. • CHECK DAMAGED PARTS. Before further use of the appliance, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an Authorized Service Center unless otherwise indicated elsewhere in this manual. • STAY ALERT. Watch what you are doing. Use common sense. Do not operate appliance when you are tired. • REPAIRS AND SERVICE. Repairs, maintenance and any adjustments not specified in this manual should be performed by Black & Decker Authorized Service Centers or other qualified service organizations, always using identical replacement parts. • USE OF ACCESSORIES AND ATTACHMENTS. The use of any accessory or attachment not recommended for use with this appliance could be hazardous. • DON.T GRASP THE EXPOSED CUTTING BLADES or cutting edges when picking up or holding the appliance. • DO NOT OPERATE gardening appliances in gaseous or explosive atmospheres. Motors in these appliances normally spark, and the sparks might ignite fumes. IMPORTANT WARNINGS FOR SHRUBBERS & SHEARS 1. Keep hands away from blades. 2. Do not charge the appliance in rain, or in wet locations. 3. Do not use battery operated appliance in rain. WHEN USING YOUR CHARGER: • The appliance and its charger are specifically designed to work together. DO NOT attempt to charge the appliance with any other type of charger. DO NOT attempt to charge any other type of cordless tool with the appliance charger. • DO NOT charge appliance when temperature is below +40°F(4°C) or above +120°F (49°C). This is very important! • DO NOT ABUSE THE CORD. Never carry charger or appliance by the cord or yank it to disconnect the charger from a receptacle. Keep cord away from heat, oil, and sharp edges. • DO NOT operate a damaged charger. Have damaged cords or plugs replaced immediately. • Never expose charger to weather; use indoors only. • The charger is designed to operate on standard household electrical power (120 volts). Do not attempt to use it on any other voltage! • Do not operate appliance with charger attached PREPARING TO OPERATE: THE BATTERY IN YOUR NEW APPLIANCE IS NOT FULLY CHARGED! FIRST, READ THE SAFETY RULES. THEN FOLLOW THE “IMPORTANT CHARGING NOTES” AND “CHARGING THE BATTERY” SECTIONS. IMPORTANT CHARGING NOTES 1. Longest life and best performance can be obtained if the batteries are charged at normal room temperatures. 2. While charging, the charger will normally become warm to the touch. 3. If the batteries do not charge properly: a. Check house current at receptacle by plugging in a lamp or other appliance. b. Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights. c. If house current is okay and you do not get proper charging, contact your nearest Black & Decker Service Center. 4. The appliance should be recharged when it fails to produce sufficient power on jobs which were done easily previously. Do not continue to use the unit under these conditions. Repeat the charging procedure. 5. Unplug your appliances charger from the power supply before disconnecting the charger from the appliance. Unplug charger before attempting to clean. 6. Battery life is dependent on usage, storage temperature and time. 7. This power unit is intended to be correctly orientated in a vertical or floor mount position. CHARGING THE BATTERY (FIGURE 1) 1. Attach charger cord to the appliance. 2. Plug charger into any 120-volt receptacle. Your appliance is now on charge. CAUTION: This Charger can be used only with 60 cycle, 115-120 AC voltage. 3. Recharging the appliance will require on the average about 16 hours for it to reach full capacity. The appliance will not overcharge and can be left on charge indefinitely throug...

Download now

Please, enter two numbers from picture: