Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
After you finish reading this guide, store it in a safe place "^Structure of the Users Guide ^chapter^ Before You Begin ^hapter^ Operating Procedures ^Chapter^ Troubleshooting ^Chapterj^ Appendix Read here first. Important Information This manual is designed to help you to install, operate and maintain the trimmer. Please read and understand this manual, and keep it in a safe and convenient place. Do not operate the trimmer until you read and understand the instructions in this manual. Canon shall not be liable for incidental, consequential damages resulting from: improper or inadequate maintenance by the customer, unauthorized modification or misuse, or operation outside of the environmental specifications for the product. Canon pursues a policy of continuing improvement in design and performance of the product. Therefore, the product design and specifications are subject to change without prior notice and without legal obligation. All rights are reserved. No part of this manual may be photocopied, reproduced or translated to another language without the prior written consent of your local authorized dealer. This product applies to the CE Marking. This manual describes the operating procedures for the booklet trimmer-D1. For trimmer operations set from the host machine (printer), see the operating manual of the host machine (printer.) i Safe Use of Machine To use this machine safely, proper operation and periodical maintenance are indispensable. Read the safety precautions described in this manual thoroughly, and do not perform operations or maintenance procedures until you understand them completely. The operating procedures and safety precautions described in this manual are valid only for proper use of this machine. Responsibility for any improper use or operation of this machine, lies with the user. Safety precautions are indicated in this manual as follows: /ts WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. In order to use the machine safely, always pay attention to these warnings. A CAUTION Indicates a caution concerning operations that may lead to injury to persons, or damage to property if not performed correctly. In order to use the machine safely, always pay attention to these cautions. Important This symbol indicates the range of acceptable values and operating conditions. Note This symbol indicates useful supplementary information for operational proce- dures. Operating Safety Precautions Zh WARNING O When moving the machine, be sure to turn off all of the power switches for the connected equipment, then disconnect the power cord and contact your local authorized dealer. Otherwise, the cord may be damaged and may result in a fire or electric shock. O Do not remove the safety covers or deactivate the sensor switches for the safety covers. Otherwise, it may lead to severe injury. ^CAUTION o When removing jammed booklets from the trim section, take care not to touch the blade. Or when removing jammed booklets from Infeed section, do not put your hands and fingers close to the belt. Otherwise, if the belt drives by some chance, your hands and fingers may be caught. o This machine weighs about 152 kg (335 lb). When you operate the machine, consider the machine weight and use the machine safely. o To cut the power on this machine, unplug the power plug on the back of the machine. o Do not use paper which does not meet the specifications. Otherwise, it may cause paper jams. o Do not open the covers while machine operation, or the machine will stop and booklets will jam. o Use this machine at office or commercial environment. Do not use this machine at industrial environment. ii Caution Label Locations /*\ When removing jammed booklets from the trim section, take care not to touch the blade. /ÎK When removing jammed booklets from Infeed section, do not put your hands and fingers close to the belt. Otherwise, if the belt drives by some chance, your hands and fingers may be caught. FCC NOTICES NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at this own expense. AFCC WARNING O Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CONTENTS Important Information ..................................................