Votes - 6, Average rating: 3.8
(
)
)
|
manual abstract
To repeat all tracks on the disc, press the REP/RAND button twice, the “REP ALL” symbol will appear on the LCD-display. 3. To repeat a folder press the REP/RAND button thrice. MP3 wm 4. To random playback all tracks on the disc press the REP/RAND button four times. “RANDOM” will appear on the LCD-display. 5. To cancel press the REP/RAND button five times, the symbols on the LCD-display will go out. Low frequency amplification For low frequency amplification press the BASS button, the corresponding indication will light up. To switch off low frequency amplification 7 3951IM.indd 7 19.05.2008 15:20:30 ENGLISH press this button once again, the indication will go out. Programmed playback You can program playback of tracks (max. 99) in the desired order. CD - disc 1. When the playback of the disc is stopped, press the PROGRAM button once. Track number while programming “P-01 ” will appear on theLCD-display 2. Select the desired track, successively pressing the m or m buttons. Press the PROG button to store the selected track. 3. Repeat steps 1 and 2 to program other tracks. 4. To playback the programmed tracks press the PLAY/PAUSE/USB button. 5. To stop playback of tracks in the programmed order press the STOP button once. To cancel programmed playback press the STOP button once again. Note: The sequence in which the tracks were programmed is not stored automatically. МР3-disc 1. When the playback of the disc is stopped, press the PROGRAM button once. Track number while programming “P-01 ” will appear on the LCD-display. — PD 1 2. Select the desired track, successively pressing the m or m buttons. Press the PROG button to store the selected track. 3. Repeat steps 1 and 2 to program other tracks. 4. To playback the programmed tracks press the PLAY/PAUSE/USB button. 5. To stop playback of tracks in the programmed order press the STOP button once. To cancel programmed playback press the STOP button once again. Note: The sequence in which the tracks were programmed is not stored automatically. Note: In the programmed playback mode there is no folder repeat mode. Playback of МР3 files from USB device Note: This unit does not support playback from all HDD and some MP3 players, as well as playback of MP3 files with byte rate more than 256 Kbit/sec from external devices. Press and hold the PLAY/PAUSE/USB button for more than 1,5 seconds, the cassette recorder will switch to the USB mode. The “—“ symbols will appear on the LCD-display. Control buttons and actions sequence while working with the USB device are the same as those while working with the disc. Maximal number of folders is 500, maximal number of tracks is 999. Note: To switch between disc playback modes press and hold this button for more than 1,5 seconds. The “—“ symbols will appear on the LCD-display. Press the PLAY/PAUSE/USB button to playback. 8 3951IM.indd 8 19.05.2008 15:20:30 ENGLISH TROUBLESHOOTING GUIDE Improper usage is always the case of trouble. If you consider that there is something wrong with the unit, check possible causes in this table. If you have not managed to solve the problem, apply to the nearest authorized service center or to the dealer for repair. Problem Possible cause Solution No sound Zero level of volume Adiust volume level No power Check the power supply Improper operation of the LCD-displav Electrostatic electricity Switch off the unit and switch it on in a while Bad sound quality while playback of a cassette The heads are dirty Wipe the heads METAL or CHROME cassette type is used Use only NORMAL (IEC I) cassette type No recording Recording locking is removed Stick the hole with the isolating tape Noise while listening to radio stations in FM or AM band The station is not tuned FM band: the aerial is not extended AM band: the unit is out of reception area or in the unstable receipt area Tune the station Extend the aerial Try other location variants The cassette recorder does not playback stations in FM or AM band Radio mode is not switched on Set the operating mode switch to the RADIO position No disc indication / Disc is not plaved back Disc playback mode is not switched on Switch on the disc playback mode Disc is absent or set improperly Check the disc, it should be placed with its label down CD-R disc is empty or not finalized Use a finalized CD-R disc Condensation on the optical system Wait for a while Some tracks cannot be played back Disc is scratched or dirty Wipe the disc with a soft cloth, do not use the damaged discs Disc is in its place but tracks cannot be played back Disc is placed improperly Check the disc, it should be placed with its label up Disc is scratched or dirty Wipe the disc with a soft cloth, do not use the damaged discs Improper disc format Use discs with corresponding format USB-device No playback USB playback mode is not switched on Switch on the USB playback mode USB-device is not inserted into the jack or it does not cont...