Votes - 1, Average rating: 3
(
)
)
|
manual abstract
3. 27dB TRS Input Boost: When this option is set to on, incoming signals will be boosted 27dB before being recorded. This is helpful when recording quiet sound sources or when using mics with low output levels. 4. Encoder: WAV. . . . . . . . . . . . . .Chooses WAV as the recording format. This format is uncompressed and will yield the highest quality recordings. Be aware that the files created in this format can be quite large. MP3. . . . . . . . . . . . . .Selects MP3 as the recording format. This format compresses the audio data to yield smaller file sizes. Unlike WAV format, MP3 files are not identical representations of the original signal. They have had portions of the audio signal removed in an effort to keep file sizes to a minimum. 5. Sample Rate: The options available in this menu will depend on the Encoder selected above. Keep in mind that file sizes will increase as the sample rate is increased. 44.1 / 48 / 88.2 / 96 . . . . These will be the available sample rates when WAV is selected as the encoder. 44.1kHz is the rate for CDs. 96kHz will yield the highest frequency response, but also the largest file size. 44.1 / 48 . . . . . . . . . . .These will be the available sample rates when MP3 has been selected as the Encoder. 44.1kHz is the rate used for CDs. 6. Bit Depth: Like Sample Rate, the options shown in this menu will depend on the Encoder selected above. Keep in mind that file sizes will increase as this setting is increased. 16 / 24 . . . . . . . . . . . .When WAV is selected as the encoder, this menu will allow you to set the bit-depth of your recording. 16-bit is the CD standard. 24-bit will yield increased dynamic range and increased file size. 96 / 128 / 160 / 192 / 224 / 320 . . . . . . . . . . .When MP3 is selected as the encoder, this value will determine the bit-rate of the file. 320kbps will yield the best sounding file, but it will also be the largest. 7. Channels: Stereo. . . . . . . . . . . . .The Stereo option will cause the MicroTrack 24/96 to record both the left and right inputs into discrete channels. This is the default setting for the MicroTrack 24/96. Mono . . . . . . . . . . . . .The Mono option will cause the MicroTrack 24/96 to only record one channel of audio instead of two. 8. Record Time Available: This is not an adjustable parameter as it merely shows the space available on the media in the MicroTrack 24/96. This information is provided here to help you make a choice of which recording parameters to use. If you see that you’re getting low on memory space, you can choose to use MP3 encoding instead of WAV to yield smaller recordings. 3 -Hardware Controls and Indicators Back Light Menu This menu sets the automatic shutoff time for the MicroTrack 24/96’s back light. When set to “always off,” the back light will never turn on. When “always on” is selected, the back light will be on whenever the MicroTrack 24/96 is powered on. The other three settings available on this menu determine the amount of time the back light will stay on after the last control is pressed on the MicroTrack 24/96. For example, if “5 seconds” is selected, the back light will turn on any time a button is pressed on the MicroTrack 24/96. The back light will then turn off five seconds after the last button is pressed. Using the back light will have an effect on the battery life of the MicroTrack 24/96. Using the back light often will drain the battery quickly. Therefore, we recommend only using the back light when necessary in order to yield maximum battery life. System Menu 1. Connect to PC: Switches the MicroTrack 24/96 into host mode so that files on the CompactFlash media can be accessed by a computer. 2. Format Media: Used for formatting (erasing) the inserted CompactFlash media. 3. Link L+R: Locks the levels of the left and right inputs together. 4. Playback EQ: Allows you to select one of the preset EQ curves for file playback. 5. Scrub Audio: Allows you to hear audio as you rewind and fast-forward through a file during playback. 6. Verify Delete: Turns the Delete confirmation on and off. 7. Auto Off: Displays options for conserving power. 8. Language: Lets you select a language for the MicroTrack 24/96 display. 9. Factory Defaults: Resets the MicroTrack 24/96 to its factory settings. 10. Firmware Update: Provides a method for updating the operating system within the MicroTrack 24/96 as new updates are released. 11. Version: Shows the current OS version. 12. Contrast: Allows adjustment of the display contrast for easy viewing. 13. Setup Time & Date: This allows you to set the proper time and date on the device. < Connect to PC Menu This menu option is used to connect your MicroTrack 24/96 to your computer when the USB cable is already attached. 1. Selecting this menu option will present you with a screen that says “press NAV key to connect to pc via usb.” 2. In order to connect, press in on the [NAV] wheel. 3. When the connection between the MicroTrack 24/96 and your computer is made, the Mir...
Other models in this manual:Audio Players - MICROTRACK 24 (761.83 kb)
Audio Players - MICROTRACK 24 (761.83 kb)