Votes - 0, Average rating: 5
(
)
)
|
manual abstract
Bias adjustment The BIAS ADJUST control is for fine adjustment of the recording bias. Normally, it is not necessary to adjust this control since the recording bias can be automatically adjusted by the built-in Auto Tape Selector and the AUTO TAPE TUNING button for different tape types. However, if you feel that your recording needs further bias adjustment (to compensate for absent or distorted high frequencies), adjust this control to your liking. When high frequencies are When high frequencies are distorted, increase the absent, decrease the recording recording bias by turning bias by turning the BIAS the BIAS ADJUST control ADJUST control clockwise. counterclockwise. KX-493 BIAS ADJUST BIAS ADJUST 00 KX-393 BIAS ADJUST BIAS ADJUST Output Level (dB) Frequency (Hz) 1 Insufficient bias (High frequencies are distorted.) 2 Optimum bias 3 Excessive bias (High frequencies are absent.) Synchronized recording function When operating this unit in combinaton with the YAMAHA CD Player which has SYNCHRO button on its remote control transmitter, CD Synchronized recording function can be utilized. This function is operated with the remote control transmitter of the CD Player. (Regarding the operation, refer to the manual of the CD Player.) SYNCHRO indicator of this unit lights when the SYNCHRO button of the remote controller is pressed. ENGLISH 0 0 11 KX-493 KX-493 Tape counter KX-393 Tape counter ! ! NATURAL SOUND STEREO CASSETTE DECK KX-493 YAMAHA GF Head Cassette Stabilizer EJECT INTRO SCAN REC/PAUSE MUTE/SEARCH STANDBY/ON DOLBY NR OFF/ B/ C/MPX COUNTER MEMORYRESET REC LEVELBALANCE MIN MAXL R– +– +MIN MAX PLAY TRIMBIAS ADJUSTLEVELPHONES 0 REPEAT TUNINGOFF/0-M/FULL AUTO TAPETIMER OFFREC PLAY MUTE/SEARCHCOUNTER RESET 00 NATURAL SOUND STEREO CASSETTE DECK KX-393 DOLBY NR OFF/ B/ C/MPX AUTO TAPE TUNING COUNTER MEMORYRESET REC LEVELBALANCE MIN MAXL R– +– +MIN MAX YAMAHA GF Head Cassette Stabilizer EJECT PLAY TRIMBIAS ADJUSTLEVELPHONES INTRO SCAN REC/PAUSE MUTE/SEARCH 0 STANDBY/ON MUTE/SEARCHCOUNTER RESET 00 REC MUTE OPERATION - Inserting a blank space during recording During recording A 4-second blank interval is automatically recorded on the tape, and then the MUTE/SEARCH deck enters Rec/Pause mode. If a blank interval longer than 4 seconds is desired, keep pressing the button as long as you want. When the MUTE/SEARCH button is released, the deck enters Rec/Pause mode after making a 4-second blank interval. 0-STOP OPERATION - To return to the “0000” point During recording RESET ! 3 The tape will be automatically rewound to the “0000” point. The “0000” point is memorized. REC RETURN OPERATION - To return to the point at which the recording previously started During recording ! OIf the !button is pressed during recording, Rec Return operation automatically rewinds the tape to the point where the Ubutton was pressed. DOLBY HX PRO DYNAMIC BIAS SERVO SYSTEM This unit incorporates the Dolby HX Pro system which Dolby noise reduction and HX Pro headroom extension automatically controls the effective bias to reduce manufactured under license from Dolby Laboratories distortion and noise, improving high frequency Licensing Corporation. HX Pro originated by Bang & response during recording. Tapes recorded with this Olufsen. system retain the same high quality even when played "DOLBY", the double-D symbol and "HX PRO" are back on any other cassette deck. trademarks of Dolby Laboratories Licensing Corporation. TIMER RECORDING/PLAYBACK ( KX-493 only) TIMER RECORDING/PLAYBACK ( KX-493 only) With a commercially available audio timer it is possible to For details, refer to the instructions of your audio timer. make recordings and initiate playback automatically at No change in any of the other connections between the any time. deck and amplifier/receiver, etc., is necessary. Make sure that all power cord connections between the timer and amplifier/receiver are properly made. ENGLISH TIMER NATURAL SOUND STEREO CASSETTE DECK KX-493 YAMAHA GF Head Cassette Stabilizer EJECT INTRO SCAN REC/PAUSE MUTE/SEARCH STANDBY/ON DOLBY NR OFF/ B/ C/MPX COUNTER MEMORYRESET REC LEVELBALANCE MIN MAXL R– +– +MIN MAX PLAY TRIMBIAS ADJUSTLEVELPHONES 0 REPEAT TUNINGOFF/0-M/FULL AUTO TAPETIMER OFFREC PLAY 00 To an AC outlet Tuner Amplifier or receiver Audio timer Timer recording 1. After turning on the power to each component, select the station on your tuner which you want to record and turn down the volume on your amplifier/receiver. This will have no effect on the recording signal level. Remember to set the proper recording level. 2. Set the timer to the desired recording start and stop times. It is advisable to set the timer to begin recording slightly before and end slightly after the actual broadcast receiving time to leave some room for later editing. 3. Set the TIMER switch to the REC position. TIMER REC PLAYOFF 4. The timer will send power to the amplifier/receiver, tuner and deck at the preset time, turning all the components on and initiating the recor...