Votes - 4, Average rating: 4.5
(
)
)
|
manual abstract
..• In order to simplify the explanation illustrations may sometimes differ from the originals. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lighting flash with arrowhead symbol, within an equilateral, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARMING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture Power plug When disconnecting the power cord from the power outlet, always take hold of the plug, and not the wire, and pull free. Never connect or disconnect the power plug with wet hands since you may receive an electric shock. Remember to disconnect the power plug from the power outlet when you do not intend to use the unit for a prolonged period of time. Do not remove the case and bottom panel Any inspections or adjustments inside the unit may lead to malfunctions and electric shocks. Do not touch any of the inside parts. Do not block the ventilation holes Do not block the ventilation holes on the top of the unit by placing records or other objects over them. This will increase the inside temperature may lead to a failure or malfunction. Installation precautions Do not install the unit in any of the following locations since this may result in deterioration in performance of malfunction: * Locations exposed to direct sunlight or near objects radiating heat such as heating appliances. * Locations exposed to moisture or humidity. * Locations with poor ventilation exposed to dust and dirt. * Locations which are unstable and not perfectly flat or which are susceptible to vibration. Do not wipe with thinners Wipe the panels and case from time to time with a soft cloth. Using any kind of thinner, alcohol or volatile liquid will mar the surface, cause blotching on the exterior and erase the markings and should therefore be avoided. Do not use insecticide sprays in the vicinity. Dripping warning: The product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the product. Panel Information DECK A PLAYBACK ON/STANDBY POWER PLAY CrO2 DUBBING HI.SP.DUBBING REC CrO2 REC LEVEL MIN MAX REC/PLAYBACK BECK B DECK B COUNTER 2 3 4 2 675891016 1. ON/STANDBY SWITCH Press button to switch “ON” the unit and press again to switch “OFF” unit into “STANDBY MODE”. If the unit is left unattended for long period, remove the plug from the power socket. 2. CASSETTE HOLDER 3. PEAK LEVEL INDICATOR These indicate the recording level during recording and output level during playback. The LED indication varies with the signal strength during recording and playback. * HIGH SPEED This lights when in the high- speed dubbing. * DYNAMIC NR When you need the Dynamic noise reduction, push the level switch to the left. * PLAY CrO2/ METAL This lights when the CrO2/metal function is operated. * REC CrO2 This lights when CrO2 function is operated. 4. TAPE COUNTER AND RESET BUTTON (DECK B) When recording or playing, you can use the tape counter to count the tape length. 5. REC LEVEL SWITCH Adjust the record level. 6. CASSETTE OPERATION BUTTONS . REC This lights when deck B is in the recording the record-pause mode. (play): Press to play the tape. (rewind): Press to rewind the tape (fast forward): Press to fast forward the tape. (stop/eject) Press to stop the tape. Pressing this button after the tape stops opens the cassette holder. (pause): Press to temporarily stop the tape in the record or playback mode. Press it again to release the pause mode and restart the tape. 7. REC CrO2 SWITCH For recording with CrO2 tape. 8. HIGH SPEED DUBBING SWITCH When you need dubbing, press this switch and the relative light will be lit. 9. DUBBING SWITCH Press the DUBBING switch to get set for further record functions meanwhile relative light will be indicated. 10. PLAY CrO2/METAL SWITCH Set these switches to NORM when using normal tape, to CrO2 when using chrome tape, and to METAL when using metal tape. Operating Procedures ( IN)REC PLAY(OUT) LINE REMOTE SYSTEM TO AMP INTEGRATED CIRCUIT AC 220V~230V 50Hz RISK OF ELECTRIC SHOCK DO NOT OP EN REC AUDIO 75 FM AM LOOP . EQ IN AUX CD IN REC PLAY PLAY TAPE EQ CD LOGIC TAPE Playback a recorded tape (DECK A or DECK B) 1. Switch on the power of the unit. 2. Press the Stop/Eject button and insert a recorded cassette tape. For CrO2/metal tape, further press the CrO2/metal switch and the light at the indicator will be lit up. 3. Press the PLAY button. 4. Adjust the Amplifier Volume and Graphid Equalizer controls for your des...