Votes - 2, Average rating: 4.5 ( )

Manafacture: JVC File size: 1.88 mb File name: Language of manual:

REPEAT 1 DISC**: Repeats all the tracks on one CD. REPEAT ALL DISC: Repeats all the tracks on all the CDs, or all the tracks on the program. * See pages 13 and 15. ** REPEAT 1 DISC is not used for Program play. To cancel Repeat play, press REPEAT repeatedly until the REPEAT indicator (REPEAT 1, REPEAT 1 DISC or REPEAT ALL DISC) goes off from the display. • Repeat play is also canceled when you press 7 or 0. Prohibiting Disc Ejection—–Carrousel Lock You can prohibit CD ejection from the unit and can lock the carrousel. • This operation is possible only while the unit is on with CD selected as the source. On the unit ONLY: To prohibit disc ejection, press 0 for the carrousel while holding 7. “LOCKED” appears for a while, and the carrousel is locked. If you try to eject CDs “LOCKED” appears to inform you that the Carrousel Lock is in use. To cancel the prohibition and unlock the carrousel, press 0 for the carrousel while holding 7. “UN LOCKED” appears for a while, and the carrousel is unlocked. When you unplug the AC power cord or if a power failure occurs The setting of the Carrousel Lock will return to the initial setting (not to prohibit disc ejection) in a few days. 20 Playing Back Tapes Playing Back a Tape 1 Press 0 EJECT for the deck you want to use. 2 Put a cassette in, with the exposed part of the tape down and the side you want to play facing front. • You can play back only type I tapes. 3 Close the cassette holder gently. If you put cassettes in both decks A and B, the last deck which you have put a cassette into is selected. To operate the other deck, press TAPE A/B (or A/B on the remote control). 4 Press TAPE 3. The tape play starts and the tape running indicator (3) starts flashing slowly. When the tape plays to the end, the deck automatically stops. The use of the C-120 or thinner tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinchrollers and the capstans. To stop during play, press 7. To operate the other deck, press TAPE A/B (or A/B on the remote control), then TAPE 3. To fast-forward the tape, press . (or ./. on the remote control). The tape running indicator (3) starts flashing quickly. To rewind the tape, press 1 (or 4/1 on the remote control). The tape running indicator (2) starts flashing quickly. To remove the cassette, press 0 EJECT for deck A or EJECT 0 for deck B. For Deck A For Deck B Recording IMPORTANT: • It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable program and in any literary, dramatic, musical, or artistic embodied therein. • The recording level is automatically set correctly, so it is not affected by the VOLUME, the SUBWOOFER LEVEL, and the SOUND MODE controls. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level. • While recording, you can hear the SOUND TURBO effect through the speakers or headphones. However, the sound is recorded without this effect (see page 10). • If recordings you have made have excessive noise or static, the unit may be too close to a TV. Place the unit away from the TV. • You can use type I tape for recording. To protect your recording Cassettes have two small tabs on the back to protect unexpected erasure or re-recording. To protect your recording, remove these tabs. To re-record on a protected tape, cover the holes with adhesive tape. To keep the best recording and playback sound quality If the heads, capstans, and pinch rollers of the cassette decks become dirty, the following will occur: • Impaired sound quality • Discontinuous sound • Fading • Incomplete erasure • Difficulty in recording To clean the head, capstan, and pinch roller Use a cotton swab moistened with alcohol. Head Capstan Pinch roller Erase head To demagnetize the head Turn off the unit, and use a head demagnetizer (available at electronics and audio shops). Recording a Tape on Deck B On the unit ONLY: 1Press EJECT 0 for deck B. 2Put a recordable cassette in, with the exposed part of the tape down and the side you want to record facing front. 3Close the cassette holder gently. 4Start playing the source—FM, AM, CD player or auxiliary equipment connected to AUX IN jacks. • For duplicating tapes, see “Dubbing Tapes” on page 22. • For recording from CD, see “CD Synchronized Recording” on page 22. 5Press REC START/STOP. The REC (recording) indicator lights up on the display and recording starts. REC START / STOP To stop during recording, press REC START/STOP again or 7. To remove the cassette, press EJECT 0 for deck B. CD Synchronized RecordingDubbing Tapes On the unit ONLY: 1Press TAPE 3, then 7. 2Put the source cassette in deck A, and a recordable cassette into deck B. 3Press DUBBING. Dubbing starts. “DUBBING” appears, and the REC (recording) indicator lights up on the display. DUBBING WOOFER You can easily record a CD onto a ...

Download now

Please, enter two numbers from picture: