Votes - 3, Average rating: 4 ( )

Manafacture: Kenwood File size: 278.05 kb File name: Language of manual:

When the bulletin ends or poor reception is experienced, the tape or disc will begin playing again. NOTE Pressing the TI button whilst in the MW/LW band automatically switches reception to the FM band. However, the MW/LW band is not returned to when the TI button is pressed again. Switching to a Different Traffic Information Station: Use the 4/ . buttons to make an auto seek of the TI stations in a certain band. another traffic information station with better reception be searched for automatically. This function is on, when is first powered on. Turning Auto TP Seek Function On/Off: 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. 2 Press the . button repeatedly until the Auto TP Seek function appears in the display. Press the 4button to search in the other direction. The function setting is indicated by "ATPS ON" or "ATPS OFF" in the display, indicating that the function is on or off, respectively. 3 Switching settings Press either the AM button or FM button. The display and setting will change. If the traffic information station you are tuned to experiences poor reception, this function automatically seeks another TP station after about 30 seconds. 4 Press the MENU button to end the menu mode. — 13 — English RDS features (See page 6) Presetting Volume NOTE Preset the volume news broadcasts. 1 Tune into the station for which 2 Adjust the volume to the desired 3 Hold down the VOL ADJ button The volume level blinks once in the data has been stored. Future traffic information/news broadcasts preset level. NOTE • The volume cannot be lowered by this function during reception. The volume is only set when it is louder than the listening volume of the tuner. • You can arrange only to listen to traffic information or news with at preset volume with the volume set at minimum. News Bulletin Function with PTY News Timeout Setting You can arrange to have news bulletins interrupt your current listening source, including other radio stations. When the News Bulletin function is on, the PTY News Timeout setting allows you to set the interval during which further news interruption cannot take place. You can adjust the PTY news interruption period from 10 to 90 minutes for each journey. Turning News Bulletin Function On/Off: 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. 2 Press the . button repeatedly until the News Bulletin function appears in the display. Press the 4button to search in the other direction. The function setting is indicated by "NEWS 00M" or "NEWS OFF" in the display, indicating that the function is on or off, respectively. Depending on the change when the function 3 Changing the Function Press either the FM or AM Each time you press the FM or setting is displayed. Press the FM button to increase the to decrease it. OFF O 00M O 10M O 20M O 30M O 40M O 50M O 60M O 70M O 80M O 90M (M= minutes) When you select the news interruption timeout News function turns on and the NEWS indicator When a news bulletin is received, the NEWS indicator and reception will begin at the preset volume. NOTE If you choose the "20M" setting, further news bulletins will received for 20 minutes once the first news bulletin is received. Setting the interval at the "00M" factory default indicates no News Timeout will be made, meaning that additional news bulletins will continue to be searched for. 4 Press the MENU button to end the menu mode. NOTE • This function is only available if the desired station sends PTY-code for news bulletin or belongs to EON-Network sending PTY-code for news bulletin. • If you turn on the news bulletin function in the MW/LW band, the band is switched automatically to the FM band. However, the MW/LW band is not returned to when you turn off the function. — 14 — Programme Conduct auto seek kinds of programmes. Selecting Type of Programme 1 Hold down the MENU button "MENU" is displayed and the menu 2 Press the . button repeatedly until "PTY" appears Press the 4button to search in the other direction. 3 Press either the AM button or FM button. The PTY indicator will turn on, and the Programme Selection (PTY) Mode entered. If you make no key input in 30 seconds, the mode turn off. NOTE • You cannot use this function whilst the traffic information is turned on. • The time is not displayed until you have turned off the programme type function. NOTE Changing the Display Language to French or German In the PTY mode, hold down the CLK button for one second or more to display the name of ...

Download now

Please, enter two numbers from picture: