|
manual abstract
Hand strap (1) (attached to the unit) as ECM-T110 (not supplied). speaker. Tape speed is too fast or too slow in the AC power adaptor (1) (TCM-454VK) When using a plug-in-power system microphone, the 2 Adjust the tape playback speed. •If the unit has not been used for a long time, set it in the playback mode. Battery charger adaptor (1) (TCM-454VK) power to the microphone is supplied from this unit. Set SPEED CONTROL to: playback mode and warm it up for a few minutes m SPEED CONTROL is set at a point other than the Rechargeable batteries (TCM-454VK) (2) (Models for U.S.A. and Canada: NC-AA, 1.2V, 600mAh, Ni- SLOW (slow) to play back a tape slower. before inserting a tape. center. Note Center position to playback a tape at normal speed. The sound drops out or comes with excessive Cd) (Model for Europe: NC-AA, 1.2V, 700mAh, Ni-Cd) When recording with an external microphone, the VOR system FAST (fast) to play back a tape faster. On tapes longer than 90 minutes noise. Cassette tape DC-90 (TCM-455V for U.S.A.) (1) may not work properly because of the difference in sensitivity. We do not recommend the use of tapes longer than 90 m The volume is turned down completely. Sony alkaline battery LR6 (SG) (TCM-455V for U.S.A.) (2) 3 Press (PLAY then adjust the volume. There is a minutes except for a long continuous recording or m The batteries are weak. Microphone (TCM-455V for U.S.A.) (1) Recording from Another Equipment raised dot to show the direction to turn down volume playback. They are very thin and tend to be stretched m The heads are contaminated. See “Maintenance.”Carrying pouch (TCM-455V for U.S.A.) (1) beside VOL. easily. Recording cannot be made. Headphones (1) (TCM-473V) Connect another equipment to the MIC jack using the m Connection is made incorrectly. RK-G64HG connecting cord (not supplied). Design and specifications are subject to change without notice. m The batteries are weak. off automatically. For the customers in the USA and Canada m The record/playback head is contaminated. m VOR has been set to the improper position when RECYCLING NICKEL-CADMIUM BATTERIES VOR function works. Maintenance At the end of the tape, playback stops and the unit turns To Press or slide (Supplied to TCM-454VK only) Recording is interrupted. Stop playback/stop pSTOP m VOR is set to H or L. When you do not use VOR, fast forward or rewind NICKEL-CADMIUM BATTERY. set it to OFF. Pause playback PAUSE cin the direction of the BATTERY MUST BE RECYCLED OR DISPOSED OF Recording cannot be erased completely. arrow PROPERLY. m The erase head is contaminated. To release pause playdack, release m Recording or erasing is being made using recorded PAUSE c*. Nickel-Cadmium batteries are recyclable. CrO2 (TYPE II) or metal (TYPE IV) tape. You can help preserve our environment by Search forward Press and hold )FF/CUE and returning your unwanted batteries to your during playback (CUE) release it at the point you want nearest Sony Service Center or Factory Search backward Press and hold 0REW/REVIEW Service Center for collection, recycling or Specifications during playback and release it at the point you want proper disposal. (REVIEW) Note: In some areas the disposal of nickel-Recording system Fast forward** )FF/CUE during stop cadmium batteries in household or 2-track 1 channel monaural business trash may be prohibited. Frequency range Rewind** 0REW/REVIEW during stop TCM-473V: Recording: 250-6,300Hz Start recording rREC For the Sony Service Center nearest you call 1-800-222-Playback: 100-8,000Hz during playback SONY (United States only) TCM-455V/454VK/453V: 250-6,300Hz Erase head Capstan Record/playback head Pinch-roller Cotton swab To clean the tape heads and path For the Factory Service Center nearest you call 416-499-Speaker Wipe the heads, pinch rollers, and the capstans with a * PAUSE cwill be also automatically released when pSTOP SONY (Canada only) Approx. 3.6 cm (17¤16 in.) dia. cotton swab moistened with alcohol every 10 hours of is pressed (stop-pause-release function). Power output **If you leave the unit after the tape has been wound or use. Caution: Do not handle damaged or leaking nickel- TCM-473V: 130mW (at 10 % harmonic distortion) rewound, the batteries will be consumed rapidly. Be sure to cadmium batteries. TCM-455V/454VK/453V: 300mW (at 10 % harmonic depress pSTOP. distortion) To clean the exterior Input Use a soft cloth slightly moistened in water. Do not use To play back a tape recorded in stereo If you have any questions or problems concerning your TCM-473V: Microphone input jack (minijack) sensitivity 0.2 alcohol, benzine or thinner. (TCM-473V only) mV for 3 kilohms or lower impedance microphone The built-in speaker on this unit is monaural. TCM-455V/454VK/453V: Microphone input jack (minijack) unit, please consult your nearest Sony dealer. Note (TCM-473V only) To enjoy stereo sound, use the supplied headphones. sensitivity 0.14 mV for 3 kilohms or lower impe...
Other models in this manual:Audio Players - 453V (129.11 kb)
Audio Players - 454VK (129.11 kb)