Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
To get stereo sound, use the connections on pages six-seven and select the channel to be viewed at the TV (with the VCR turned off). 22 Front Panel F.FWD (Fast Forward) Button When playback is stopped, press to fast forward the tape at high speed. During tape playback, press to fast forward the tape while the picture stays on the screen. Details are on page 35. Press to select an item in the VCR menu. PAUSE Button POWER Button Press to turn the VCR power on and off. VCR/TV Button Press to select VCR or TV position. l VCR Position Use to watch a tape, to watch a program while recording it, or to REC(ord)/OTR Button Press once to start a recording. Press repeatedly to start a One-Touch Recording. Details are on page 27. CHANNEL (p/o) Buttons Press to change channels at the VCR. Or, press to adjust the tracking of a tape during normal playback. Also, press to remove vertical jitter in a Still picture. PLAY Button Press to play a tape. Press to release Search or Still mode and return to play- back. Details are on page 35. Press to select an item in the VCR menu. REW(ind) Button When playback is stopped, press to rewind the tape at high speed. During playback, press to rewind the tape while the picture stays on-screen. Details are on page 35. Press to return to a previous on-screen menu. STOP/EJECT Button Press once to stop the tape. When play- back is stopped, press to eject the tape. Press to select an item in the VCR menu. STOP/EJECT REC/OTR MENU STATUS/EXIT F.FWD PAUSE REW CHANNEL PLAY POWER POWER VCR/TV VCR/TV CST.IN TIMER REC VIDEO AUDIO Remote Sensor Receives a signal from your remote control so you can oper- ate your VCR from a distance. AUDIO In Jack Connect a cable com- ing from the audio out jack of a camcorder, another VCR, or an audio source here. Details are on page 32. VIDEO In Jack Connect a cable coming from the video out jack of a camcorder, another VCR, or an audio-visual source (laser disc player, video disc player, etc.) here. Details are on page 32. MENU Button Press to access the VCR menu. watch a TV program (changing channels at the VCR). When the VCR/TV light appears on the display panel, the VCR is in VCR position. . TV Position Use to watch TV (changing channels at the TV) or to watch one program while recording another. When the VCR/TV light does not appear on the display panel, the VCR is in TV position. While recording, press to pause the recording. Press again to resume recording. Details are on page 25. You can not pause a One-Touch Recording. During tape playback, press to freeze the picture. Each press of the PAUSE button will cause the noise lines to move on the screen. Press PLAY to resume normal playback. Details are on page 35. STATUS/EXIT Button Press to access or remove the on-screen status display. Details are on page 20. Press to exit on-screen menus. Rear Panel 23 ANT(enna) IN Jack Connect your antenna or cable here. Details are on pages six-10. AUDIO IN Jack Connect a cable coming from the AUDIO OUT Jack of a camcorder, another VCR, or an audio source here. Details are on page 32. AUDIO OUT Jack Connect a cable going to the AUDIO IN Jack of a camcorder, another VCR, or an audio system here. Details are on page 32. AC Power Cord Connect to a stan- dard AC outlet to supply power to the VCR. VIDEO INOUT CH3 CH4 AUDIO OUT IN ANT VIDEO OUT Jack Connect a cable going to the VIDEO IN Jack of a camcorder, another VCR, or an audio-visual system (laser disc player, video disc player, etc.) here. Details are on page 32. VIDEO IN Jack Connect a cable coming from the VIDEO OUT Jack of a camcorder, another VCR, or an audio-visual source (laser disc player, video disc player, etc.) here. Details are on page 32. CH3/CH4 Switch Set to channel 3 or 4 to use your TV with your VCR. Details are on pages six-nine. OUT Jack Use the supplied RF coaxial cable to connect this jack to the ANTENNA IN Jack on your TV, Cable Box, or Direct Broadcast System. Details are on pages six-nine. 32 Rerecording (Tape Duplication) 1. Audio cable from AUDIO OUT Jack of VCR 1 to AUDIO IN Jack of VCR 2 VIDEO INOUT CH3 CH4 AUDIO OUT IN ANT VIDEO INOUT CH3 CH4 AUDIO OUT IN ANT VCR 1 Playing VCR VCR 2 - Recording VCR 3. RF coaxial cable from the OUT jack of VCR 2 to the TV’s ANTENNA IN Jack 2. Video cable from VIDEO OUT Jack of VCR 1 to VIDEO IN Jack of VCR 2 l Audio and Video cables are not supplied. 1 Make the connections shown above. 2 VCR 1 will play your tape. Put a prerecorded tape in VCR 1. 3 VCR 2 will record your tape. Insert a blank tape in VCR 2. The VCR must be in VCR position. (The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once.) 4 Turn on the TV and set it to channel 03 or 04, whichever channel the CH3/CH4 switch on VCR 2 is set to. 5 Point the remote control at VCR 2. Press the Number buttons 0, 0, 1 or 0, 0, 2. (See Helpful Hints at right.) 6 Press the SPEED button to select SP or SLP at VCR 2. 7 Press the PLAY button on VCR 1 and the REC(ord)/OTR button...