|
manual abstract
Normal playback will resume from the point where the button is released. During playback of side “A” (forward) (►): Press to cue (fast-forward) I [CM/rnM) I I mum 1 I aw IK I <++ | 1 II 1 1 o f*c • I [cut/rnMw] 1 ►*> B*»r ■top < ■ ► Press to review (rewind) During playback of side “B” (reverse) (<4): (deck 2 only) Press to review (rewind) I[cu«/r*vl*wTl p««M 1 I I [cu»/r«vfc «T* 1 I <» II o 1 •__I »» fltr >top -4 ■ ► Press to cue (fast-forward) To listen through headphones —p I phones I Headphones (not included) | phones 1 Connect headphones (not Included) to the headphones jack. Plug type: 1/4 inch phone plug, stereo type. Note: Avoid listening for prolonged periods of time to prevent hearing loss. Automatic-tape-select function This unit is equipped with the automatic-tape-select feature; it automatically detects the type of tape being used, and then makes the suitable adjustments of the bias and equalization accordingly. Note: The cue/review function causes sounds to become high pitched. During this function, be sure to decrease the amplifier’s volume to prevent damage to the speaker system's tweeters. ■To fast-forward or rewind the tape While in the stop mode, press the appropriate button according to the figures above. Note: Cassette tapes in deck 1 and deck 2 can be advanced or rewound at the same time. — 10 — Recording (deck 2 only) To record from a sound source other than another tape 1 Switch the amplifier ON, and select the input source. 8 |tlmeT| Switch OFF the timer switch. [rec] Press the record button. {The recording indicator will illuminate and the playback indicator will flash continuously. The unit will be in the recording stand-by mode.) I power | Switch ON the power switch. I eject | Press the eject button, and then insert the cassette to be used for recording. (The part of the cassette where the tape is exposed should face downward.) rec level ШёЕ Adjust the recording level. While watching the level on the meters, adjust the left and right "rec level" controls so that the peak indication is as high as possible, without exceeding the indication noted in the chart below. Normal, Cr02 tape +3CD Metal tape +6 I Dolby NRl To record with the Dolby noise-reduct ion system, press the Dolby nolse-reduction button. (The indicator will illuminate.) I Dolby nr| ( For RS-TR255~") Press...
Other models in this manual:Cassette Decks - RSTR255 (922.09 kb)