Votes - 2, Average rating: 3.5 ( )

Manafacture: Alpine File size: 454.58 kb File name: Language of manual:

Photos and specs  Alpine  TDM-7586RB

If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer. Basic No function or display. • Vehicle's ignition is off. -If connected following instructions, the unit will not operate with the vehicle's ignition off. • Improper power lead connections. -Check power lead connections. • Blown fuse. -Check the fuse on the battery lead of the unit; replace with the proper value if necessary. • Internal micro-computer malfunctioned due to interference noise etc. -Press the Reset switch with a ballpoint pen or other pointed article. Radio Unable to receive stations. • No antenna or open connection in cable. -Make sure the antenna is properly connected; replace the antenna or cable if necessary. Unable to tune stations in the seek mode. • You are in a weak signal area. -Make sure the tuner is in the DX mode. • If the area you are in is a primary signal area, the antenna may not be grounded and connected properly. -Check your antenna connections; make sure the antenna is properly grounded at its mounting location. • The antenna may not be the proper length. -Make sure the antenna is fully extended; if broken, replace the antenna with a new one. Broadcast is noisy. • The antenna is not the proper length. -Extend the antenna fully; replace it if it is broken. • The antenna is poorly grounded. -Make sure the antenna is grounded properly at its mounting location. Cassette Tape playback sounds dull. • The tape head needs cleaning. -Clean the tape head. • Incorrect Dolby NR in use (TDM-7586RB/TDM7584R only). -Check Dolby NR switch setting. CD CD Changer not functioning. • Out of operating temperature range +50°C (+120°F) for CD. -Allow the vehicle's interior (or trunk) temperature to cool. CD playback sound is wavering. • Moisture condensation in the CD Module. -Allow enough time for the condensation to evaporate (about 1 hour). Unable to fast forward or backward the CD. • The CD has been damaged. -Eject the CD and discard it; using a damaged CD in your unit can cause damage to the mechanism. CD playback sound skips due to vibration. • Improper mounting of the CD Changer. -Securely re-mount the CD Changer. • Disc is very dirty. -Clean the disc. • Disc has scratches. -Change the disc. CD playback sound skips without vibration. • Dirty or scratched disc. -Clean the disc; damaged discs should be replaced. Single (8 cm) disc does not play. • Single CD adaptor is not used. -Attach a single CD adaptor (recommended by Alpine) to the single disc and insert into the CD magazine. 18-EN Indication for CD Changer HI TEMP • Protective circuit is activated due to high temperature. -The indicator will disappear when the temperature returns to within operation range. ERROR - 01 • Malfunction in the CD Changer. -Consult your Alpine dealer. Press the magazine eject button and pull out the magazine. Check the indication. Insert the magazine again. If the magazine cannot be pulled out, consult your Alpine dealer. • Magazine ejection not possible. -Press the magazine eject button. If the magazine does not eject, consult your Alpine dealer. ERROR - 02 • A disc is left inside the CD Changer. -Press the Eject button to activate the eject function. When the CD Changer finishes the eject function, insert an empty CD magazine into the CD Changer to receive the disc left inside the CD Changer. NO MAGZN • No magazine is loaded into the CD Changer. -Insert a magazine. NO DISC • No indicated disc. -Choose another disc. Specifications FM TUNER SECTION Tuning Range 87.5 – 108.0 MHz Mono Usable Sensitivity 0.7 .V 50 dB Quieting Sensitivity 1.1 .V Alternate Channel Selectivity 80 dB Signal-to-Noise Ratio 65 dB Stereo Separation 35 dB MW TUNER SECTION Tuning Range 531 – 1,602 kHz Sensitivity (IEC Standard) 25.1 .V/28 dB LW TUNER SECTION Tuning Range 153 – 281 kHz Sensitivity (IEC Standard) 31.6 .V/30 dB TAPE PLAYER SECTION Tape Speed 1-7/8 ips (4.8 cm/sec) ±0.7% Wow & Flutter 0.06% WRMS Signal-to-Noise Ratio With Dolby B-TYPE NR (TDM-7586RB/TDM-7584R only) 68 dB Without Dolby NR 60 dB Frequency Response With Alpine Test Tape 30–20,000 Hz REMOTE CONTROL (TDM-7586RB/TDM-7584R only) Battery Type "AAA" size dry battery Battery Quantity 2 Dimensions (W . H . D) 42 mm (1-21/32") . 121 mm (4-3/4") . 23 mm (15/16") Weight (without battery) 50 g (1.8 oz) GENERAL Power Requirement 14.4 V DC (11–16 V allowable) Maximum Power Output* 45 W . 4 Maximum Pre-Output Voltage 2 V/10k ohms Bass ±15 dB at 30 Hz Treble ±10 dB at 10 kHz Weight 1.4 kg (3 lbs. 1 oz) CHASSIS SIZE Width 178 mm (7") Height 50 mm (2") Depth 155 mm (6–1/8") NOSEPIECE SIZE Width 170 mm (6–3/4") Height 46 mm (1–13/16") Depth 19 mm (3/4") * Under maximum operating voltage and input signal, into 4 ohms. Due to continuous product improvement, specifications and design are subject to change witho...

Download now

Please, enter two numbers from picture: