Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
1 Recording a Programme Immediately Before recording a programme, you must have preset the corresponding station (unless you are recording via an external video source). If you have not done so, refer to pages 18 and 19. (SV-635X) (SV-631X/SV-6315X/SV-6313X/ SV-530X/SV-435X/SV-431X/SV-235X/ SV-231X/ SV-2315X/SV-2313X) 1 Switch on the television. 2 To monitor the programme being recorded, select the television channel reserved for use with your VCR (or the AV input if used). 3 Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. Result: The VCR is switched on automatically. 4 Select: . The station to be recorded using the PROG/TRK ( "! or . ) / PROG ( "! or . ) buttons or . The AV1, AV2 or AUX (SV-635X/SV-631X/SV-6315X/ SV-6313X/SV-530X/SV-435X/SV-235X only) source using the INPUT button for a satellite tuner or external video source Result: The station number is displayed and the programme can be seen on the television. With SV-635X/SV-631X/SV-6315X-SV-6313X/SV-530X/SV-435X/ SV-431X, you can select the recording speed (SP/LP). Press the SPEED button. 5 Hold REC ( ) down for a while to start recording. Result: The record indicator appears on the television and VCR display. An index is recorded on the tape (see page 36). 6 To stop recording, press once. . . If the cassette is ejected when you start recording, check that the safety tab is intact or the opening is covered with adhesive tape. . If you reach the end of the tape while recording, the cassette rewinds automatically. OK 6 REC MENU AUDIO SPEED TV/VCR OK 5 DISP./ VOL PROG/TRK U AUDIO DISPLAY TRK PROG U AUDIO 4 4 4 4 25 This function enables you to record up hours of programmes. (LP) Your VCR stops automatically after the requested 26 Recording a Programme with Automatic REC MENU AUDIO SPEED TV/VCR REPEAT 5 3 DURATA 0:00 IMPOSTA DURATA: TASTO REC DISP./ VOL PROG/TRK U AUDIO DISPLAY TRK PROG U AUDIO 4 4 4 4 (SV-635X) (SV-631X/SV-6315X/SV-6313X/ SV-530X/SV-435X/SV-431X/SV-235X/ SV-231X/ SV-2315X/SV-2313X) 1 Switch on the television. 2 To monitor the programme being recorded, select the television channel reserved for use with your VCR (or the AV input if used) 3 Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. Result: The VCR is switched on automatically. 4 Select: . The station to be recorded using the PROG/TRK ( "! or . ) / PROG ( "! or . ) buttons or . The AV1, AV2 or AUX (SV-635X/SV-631X/SV-6315X/ SV-6313X/SV-530X/SV-435X/SV-235X only) source using the INPUT button for a satellite tuner or external video source Result: The channel number is displayed and the programme can be seen on the television. . With SV-635X/SV-631X/SV-6315X-SV-6313X/SV-530X/SV-435X/ SV-431X, you can select the recording speed (SP/LP). Press the SPEED button. 5 Hold the REC button ( ) down for a while to start recording. Result: The record indicator appears on the television screen and VCR display. An index is recorded on the tape (see page 36). 6 Press the REC button ( ) several times to increase the recording time in: . 30-minute intervals up to four hours 1-hour intervals up to nine hours (LP) Result: The length is displayed on the television displays. The selected programme is recorded for the length of time requested. At the end of that time, the VCR stops recording automatically. 7 If you wish to cancel the recording before the end, press VCR STANDBY/ON (STANDBY/ON). . If the end of the tape is reached while recording: The recording stops The VCR automatically turns off Using the ShowView Feature (SV-635X/SV-530X/SV-435X/SV-235X Only) Before presetting your VCR: . Switch on both the television and your VCR . Check that the date and time are correct . Insert the cassette on which the programme is to recorded (safety tab intact) Up to six programmes can be preset. Press the SHOWVIEW button. Result: A message is displayed to allow you to enter the ShowView code. . If all six programmes have been set, the message IL TIMER E’ COMPLETO: CANCELLARE UNA PROGRAMMAZIONE PER INSERIRNE UNA NUOVA is displayed. Refer to page 30 if you wish to cancel a preset recording. Press the numeric buttons to enter the code opposite the programme that you wish to record in your television magazine. . If you wish to correct the ShowView code that you are entering: . Press the .! button until the digit to be corrected is cleared . Enter the correct digit Press the MENU or Showview button. Result: The information concerning the programme is displayed. . When using the ShowView function for the first time with stored stations, the programme number flashes. This one time, you must enter the station number manually by pressing the #! or .! buttons. Refer to the following page if: . The programme number or times flash . You wish to modify the programme If the programme and times are co...
Other models in this manual:Audio Players - SV-635X (698.86 kb)
Audio Players - SV-631X (698.86 kb)
Audio Players - SV-6315X (698.86 kb)
Audio Players - SV-6313X (698.86 kb)