Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
For digital input signals, set the INPUT switch to DIGITAL. 4 When Deck 1 is set in the Record mode, recording starts on both Deck 1 and Deck 2 simultaneously. 5 When the Stop key on Deck 1 is pressed, recording on both Deck 1 and Deck 2 stops simultaneously. E When the COMMON MODE switch is set to "1&2", the STOP key, PLAY key, PAUSE key, RECORD key, F FWD key, REW key and REC MUTE key on Deck 1 (Deck 2) are effective for both decks. E The input signals during recording are output from the ANALOG OUT connectors and the DIGITAL OUT connector of Deck 1 and Deck 2. Continuous recording means recording one input source continuously using tapes in Deck 1 and Deck 2. 1 Connect the input source to the ANALOG IN connectors for analog input signals and to the DIGITAL IN "1" connector for digital signals. aThe DIGITAL IN "2" connector is disabled. 2 Set the COMMON MODE switch to "1 > 2". 3 For analog input signals, follow procedures 3 to 6 in "5-1-1. Recording analog input signals". For digital input signals, set the INPUT switch to DIGITAL. 4 Set "Seqtime" in the menu. (.p.28) 5 Set Deck 1 in the Record mode and start recording. When the ABS time of Deck 1 reaches the time set with "Seqtime", Deck 2 automatically starts recording. 6 Deck 1 rewinds the tape automatically to the beginning either 3 minutes after the time set with ''Seqtime'' or when the tape end is reached. 7 Deck 2 rewinds the tape automatically to the beginning either 3 minutes after the time set with ''Seqtime'' or when the tape end is reached. E To stop recording in the middle, press the STOP key on the deck which is recording. E The input signals being recorded are output from the ANALOG OUT connectors and DIGITAL OUT connector of Deck 1 (Deck 2). Section 6 : Playback 6-1. Normal playback 1 Set the COMMON MODE switch to OFF. 2 Press the PLAY key to start playback. E When the REW key (F FWD key) is pressed during playback, 2 times (3 times) normal speed rewind cueing (fast-forward cueing) is performed. Pressing it once more allows 4 times (6 times) normal speed cueing. Pressing it once more restores 2 times (3 times) cueing. To restore normal playback, press the PLAY key. E Holding the REW key (F FWD key) pressed for 1 second or more during playback performs 2 times (3 times) normal speed rewind (fast forward) cueing for as long as the key is pressed. Releasing it restores normal playback. E Pressing the REW key during fast-forward cueing switches to 2 times normal speed rewind cueing. E Pressing the F FWD key during rewind cueing switches to 3 times normal speed fast-forward cueing . E Playback signals are output from the ANALOG OUT and DIGITAL OUT connectors of Deck 1 (Deck 2). 6-2. Continuous playback With continuous playback, the tapes in Deck 1 and Deck 2 are played back continuously. 1 Set the COMMON MODE switch to "1 > 2". 2 Set "Seqtime" in the menu. (.p.28) 3 Press the PLAY key on Deck 1 to start playback. When the ABS time of Deck 1 reaches the time set with "Seqtime", Deck 2 starts playback automatically. 4 Deck 1 automatically rewinds the tape to the beginning either 3 minutes after the time set with "Seqtime" or when the tape end is reached. 5 Deck 2 automatically rewinds the tape to the beginning either 3 minutes after the time set with "Seqtime" or when the tape end is reached. E The playback signals are output from the ANALOG OUT and DIGITAL OUT connectors of Deck 1 (Deck 2). E The playback sound can also be monitored through the ANALOG CASCADE OUTPUT connectors. When "Cas Out" is set to "Auto" in the menu (.p.28), playback sound output is switched from Deck 1 to Deck 2 at the time Deck 2 starts playback. In this status, if the PLAY key of Deck 1 is pressed, you can monitor the playback sound of Deck 1 again. 6-3. Skip playback When a Skip ID is detected during playback, the tape is fast-forwarded to the next Start ID and resumes playback. 1 Select the deck with the SELECT 1/2 key. 2 Press the MENU key to show the following menu in the time display. Skip1 Off 3 Set to "On" with the UP/DOWN key to engage the Skip Play mode. E If the STANDBY key is set to ON, the Play-Pause mode is engaged at the Start ID. 6-4. Single playback When a Start ID is detected during playback, this function automatically engages the Play-Pause mode. 1 Select the deck with the SELECT 1/2 key. 2 Press the MENU key to show the following message in the time display. Single1 Off 3 Set to On" with the UP/DOWN key to engage the Single Play mode. Section 6 : Playback 6-5. Repeat playback This function allows one or all programs to be played back repeatedly. aWith one program repeat, the tape is automatically rewound to the previous Start ID when a Start ID is detected. aFor all program repeat, the tape is automatically rewound to the beginning when the tape end is reached or the End ID is detected. 1 Select the deck with the SELECT 1/2 key. 2 Press the MENU key to show the following menu in the time display. Repeat1 Off 3 Set to "Single" with the UP/DOWN key to en...