Votes - 1, Average rating: 4 ( )

Manafacture: Garmin File size: 1.27 mb File name: Language of manual:

Tighten the RJ-45 locking ring clockwise until it is firmly sealed. Note: If you are using a Garmin GPSMAP 4000 or 5000 series chartplotter, you may not need a GMS 10 network port expander. The GPSMAP 4000 and 5000 series chartplotters have multiple RJ-45 sockets. Stand-alone Network Garmin radome GPS 17/17X Garmin Chartplotter NOTE : When using the Garmin radome with a stand-alone network, the chartplotter and GPS antenna (GPS 17) must be installed according to their installation instructions. This diagram only shows how a Garmin radome communicates with a stand-alone network and does not illustrate the full wiring needs of the chartplotter or GPS 17/17X. Note: Both the Garmin radome and Garmin chartplotter must be connected to a power source according to their installation instructions. This diagram only illustrates the network data connections. Garmin Radome Installation Instructions 5 Expanded Network Garmin GMS 10 marine network port expander Garmin GDL 30/30A marine weather/audio satellite receiver GA 31 GSD 22 sounder module to transducer Garmin Chartplotter Garmin Chartplotter Garmin radome GPS 17/17X NOTE : When using the Garmin radome with an expanded network, each network component must be installed according to its installation instructions. This diagram only shows how a Garmin radome communicates with an expanded network, and does not show the full wiring needs of the other network components. Note: The Garmin radome, Garmin chartplotter, and the other network components must be connected to a power source according to their installation instructions. This diagram only illustrates the network data connections. Front of Boat Offset Depending on the radome installation, it may be necessary to adjust the Front of Boat Offset. If the radome installation requires a 180° offset, change the Front of Boat Offset to 180° and test the radar. If the Front of Boat Offset needs further adjustment, continue with the procedure below. Using the bow of the ship, take an optical bearing of a stationary target located within viewable range. Measure the target bearing on the radar. If the bearing deviation is more than +/- 1°, then do the following to access the Front of Boat Offset from the menu on your chartplotter: Front of Boat Offest on a 3000 Series chartplotter: 1. From the Radar Page, press the ADJ key to display the Adjustment Menu. 2. From the Adjustment Menu, select Setup, and press ENTER. Using the Rocker, select the Advanced tab. 3. Using the ROCKER, highlight the Front of Boat Offset slider, and press ENTER. 4. Adjust the Front of Boat Offset. Front of Boat Offset on a 4000/5000 Series chartplotter: 1. From the Home screen, select Radar > Radar Setup > Advanced > Front Of Boat. 2. Adjust the Front of Boat Offset. Using the Radar All functions of the Garmin radome are controlled using your Garmin marine network chartplotter. See the Radar section of your chartplotter's manual for operating instructions. If your chartplotter's manual does not contain a Radar section, download the latest revision of the manual from Specifications GMR 18/18 HD Unit Dimensions: 457 mm (18") D x 236 mm (9 1/4.") H Radar Radome Weight: Unit 7.17 kg (15.8 lbs); cable 3.81 kg (8.4 lbs) Range Scales: 1/8 nm (with 1/32 nm range rings) to 36 nm (with 9 nm range rings) Power Output: 4 kW Power Input Source: 10.5-35 VDC 33.5 W Operating Temperature Range: -15° C (5° F) to 60° C (140° F), and a relative humidity up to 95% at 35° C (95° F) Beamwidth: Horizontal beamwidth of 5° nominal / Vertical beamwidth of 25° nominal Range: 66.67 km (36 nm) Wind Velocity: Wind speed up to 100 Kts Antenna RPMs: 24 or 30 rpm Minimum Range: 20 meters (65 feet) Range Discrimination: 20 meters (65 feet) RF Transmit Frequency: 9410 ± 30 MHz GMR 24/24 HD Unit Dimensions: 610 mm (24") D x 244 mm (9 5/8") H Radar Radome Weight: Unit 9.12 kg (20.1 lbs); cable 3.81 kg (8.4 lbs) Range Scales: 1/8 nm (with 1/32 nm range rings) to 48 nm (with 12 nm range rings) Power Output: 4 kW Power Input Source: 10.5-35 VDC 33.5 W Operating Temperature Range: -15° C (5° F) to 60° C (140° F), and a relative humidity up to 95% at 35° C (95° F) Beamwidth: Horizontal beamwidth of 3.6° nominal / Vertical beamwidth of 25° nominal Range: 88.89 km (48 nm) Wind Velocity: Wind speed up to 100 Kts Antenna RPMs: 24 or 30 rpm Minimum Range: 20 meters (65 feet) Range Discrimination: 20 meters (65 feet) RF Transmit Frequency: 9410 ± 30 MHz Garmin Radome Installation Instructions GMR 18/18 HD 236 mm (9 1/4") GMR 24/24 HD 244 mm (9.5/8") GMR 18/18 HD 457.0 mm (18") GMR 24/24 HD 610 mm GMR 18/18 HD 236 mm (9 1/4") GMR 24/24 HD 244 mm (9.5/8") GMR 18/18 HD 457.0 mm (18") GMR 24/24 HD 610 mm (24") Toward Bow 141.5 mm (5 9/16") GMR 18/18 HD 201.5 mm (7 15/16") GMR 24/24 HD 277.4 mm (10 /32") GMR 24/24 HD 190.8 mm (7 /2") 233.0 mm (9 5/32") GMR 18/18 HD 114.0 mm (4 15/32") Warnings WarNING: This product, its packaging, and its components contain chem...

Download now

Please, enter two numbers from picture: