Votes - 3, Average rating: 5
(
)
)
|
manual abstract
Ensure that the operating instructions are with the tool when it is given to other persons. Operating controls and parts On / off switch Lockbutton (only WSJ 750-ET and WSJ 850-ET) Ventilation slots Stroke rate adjustment thumbwheel Dust removal system connector Baseplate Orbital action adjustment lever Baseplate locking screw Guide roller Saw blade (insert tools) Guard Blade holder Saw blade release lever Dust removal hood Low-friction baseplate cover Anti-splinter insert Contents Page 1. General information 13 2. Description 14 3. Tools and accessories 14 4. Technical data 15 5. Safety precautions 16 6. Before use 18 7. Operation 19 8. Care and maintenance 20 9. Troubleshooting 21 10. Disposal 22 11. Warranty 22 12. EC declaration of conformity 23 1. General information 1.1 Signal words and their meaning -CAUTION- Used to draw attention to a potentially dangerous situation which could lead to minor personal injury or damage to the equipment or other property. -NOTE- Used to draw attention to an instruction or other useful information. 1.2 Pictograms Warning signs General Warning: Warning: warning electricity hot surface Obligation signs Wear Wear Wear Wear eye ear protective breathing protection protection gloves protection Symbols Read the operating instructions before use. These numbers refer to the corresponding illustrations. The illustrations can be found on the fold-out cover pages. Keep these pages open while studying the operating instructions. In these operating instructions, the WSJ 750-ET / WSJ 750-EB / WSJ 850-ET / WSJ 850-EB orbital action jig saw is referred to as “the tool”. Location of identification data on the tool The type designation and serial number can be found on the rating plate on the tool. Make a note of this data in your operating instructions and always refer to it when making an enquiry to your Hilti representative or service department. Type: Serial no.: en 13 2. Description en 2.1 Correct use The tool is an electrically-powered orbital action jig saw for cutting wood, plastic, metal, plasterboard (drywall panel) and fiberboard. It is designed for professional use. The working environment may be a construction site, workshop, occupied living accommodation or other workspace and the work carried out may include construction, renovation or conversion. Use of the tool for cutting materials containing asbestos is not permissible. The tool may be powered only by an electric supply providing a voltage and frequency in compliance with the specification given on its rating plate. The items supplied include: – Electric tool incl. saw blade – Operating instructions, – Packaging – Accessories (dust removal module, anti-splinter insert, dust removal adaptor, low-friction baseplate cover, hex. socket wrench, dust removal hood) 3. Tools and accessories Saw blade W-CS Dust removal module WSJ-DRS Anti-splinter insert W-ASJ SS Dust removal adaptor W-ASJ AS Low-friction baseplate cover W-ASJ GL Hex. socket wrench 5-W-A SW5 Dust removal hood W-ASJ AH 3.1 WSJ-DRS dust removal module 3.1.4 Technical data WSJ-DRS dust removal module for the WSJ 850-ET and WSJ 850-EB Location of identification data on the tool 3.1.1 General information Power input 80 W The type designation and serial number can be found on Suction performance 400 l/minthe rating plate on the tool. Make a note of this data in Weight 250 g your operating instructions and always refer to it when Dimensions (LxWxH) 150x60x100 mm making an enquiry to your Hilti representative or service department. 3.1.5 Before use -NOTE- Type: WSJ-DRS The dust removal hood must be fitted in front of the saw blade when the dust removal module is in use (see 6.5). Serial no.: Attaching the dust removal module 1. Unplug the supply cord from the electric socket. 3.1.2 Safety 2. Fit the dust removal adaptor into the opening on the Use as directed tool. The WSJ-DRS may be used only in conjunction with the 3. Push the dust removal adaptor toward the tool fromWSJ 850-ET and WSJ 850-EB. below until it engages. Use of the WSJ DRS for materials containing asbestos 4. Push the dust removal module onto the tool and the or for metal, glass and carbon fiber dust is not permisdust removal adaptor until it is heard to engage. sible. Detaching the dust removal module Use of the WSJ-DRS for damp or explosive dust is not 1. Unplug the supply cord from the electric socket. permissible. 2. Press the two buttons on the dust removal module (one on each side) and hold them in this position. 3.1.3 General safety precautions 3. Pull the dust removal module away from the tool and . When changing the filter, hold the tool and/or the WSJ- the dust removal adaptor toward the rear. DRS so that the filter drawer can be pulled out verti 4. Release the dust removal adaptor from the tool by cally downwards. This prevents dust escaping. pushing it downwards. . We recommend that breathing protection is worn 5. Push the dust removal adaptor downwards and pull it when chang...
Other models in this manual:Saws - WSJ 850 (496.59 kb)