Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
The base incorporates key hole slots for wall mounting. The switches use the most recent technology features like Auto MDI/ MDI- X function on all ports and non blocking architecture. Features • Ethernet IEEE 802.3 ( 10Base- T) & Fast Ethernet 802.3u ( 100Base- TX) compliant • 10/ 100Mbit/ sec, Full or Half- Duplex, Auto- Negotiation on all ports • Store & Forward architecture • Forwarding/ Filtering Rate 148,800 packets / sec. • MAC address table: 1K, Buffer 128KByte • Status LEDs for Power, 10/ 100Mbit, Link/ Activity Package Contents ! • This manual ! • 5/ 8 port LINDY 10/ 100 NWAY Switch ! • AC/ DC power supply Operating Environment Do not place any objects on top of the Switch. Do not cover the vents of the unit. Do not place the units near a heating source. Ensure good ventilation. For in- house use only. Temperature 0- 55°C, Humidity 10- 95% non condensing. Installation and Use Connect the power supply to the mains and to the Switch. Connect the Switch to your network devices using standard patch lead. Auto- MDI/MDI- X function automatically detects uplink or downlink connections and automatically configures to the correct pinout. You do not have to use Crossover Cables for uplink connections. Please regard that the maximum length of any connection between the switch and a device is 100m ( including all cables) . For 100Mbps connections use at least Cat. 5 STP/ UTP cables! Troubleshooting • Make sure the POWER LED is lit. If not either the power supply or the switch ( or LED) might be faulty. Contact your dealer in this case. • If you connect any powered device to a port the LINK/ Activity LED of this port should light. If not use another patch cable and check that the device you have connected is powered on and it’s network port is active. • Make sure all network and patch cables are STP or UTP and are not broken. Make sure any distance between the Switch and a device is 100m or less. Deutsches Benutzerhandbuch Ubersicht Die LINDY 10/ 100Fats Ethernet Switches sind sehr kompakt und Einsatz an Orten mit begrenztem Platzangebot geeignet. Sie bas auf der neuesten Technologie mit Features wie Auto- MDI/ MDI- X Non- Blocking Architektur. Eigenschaften • Ethernet IEEE 802.3 (10Base- T) & Fast Ethernet 802.3u (100Base- TX) kompatibel • 10/100Mbit/s, Voll- /Halb- Duplex, Auto- Negotiation auf allen • Store & Forward Architektur • Forwarding/ Filtering Rate 148,800 Pakete/ s • MAC Adress Tabelle: 1K, Speicher 128KByte • Status LEDs: Betriebsbereit, Verbindung/ Link, Geschwindig Lieferumfang ! • Dieses Handbuch ! • 5/ 8 Port LINDY 10/ 100 NWAY Switch ! • Externes Steckernetzteil Einsatzbedingungen, Umgebung Stellen Sie keine Gegenstande auf den Switch. Stellen Sie de Switch nicht in die Nahe von Warmequellen. Sorgen Sie fur ausreichende Beluftung, verdecken Sie nicht die Luftschlitz Fur die Verwendung in geschlossenen Raumen, Temperatur bereich 0- 55°C, Feuchtigkeit 10- 95% nicht kondensierend. Installation Stecken Sie das Steckernetzteil in die St...
Other models in this manual:Laminators - 32982 (57.45 kb)