|
manual abstract
Insert partially used supply cartridge into dispenser. Note: tool should be positioned between rubber rollers in dispenser. Turn handle clockwise until tool has exited dispenser and film is aligned and wrinkle-free. Store reusable cartridge starter tool for later use. Install feed tray and trim off excess film using cut blade. Remove used supply cartridge by pulling outward. If there is film between the rollers, turn handle counter-clockwise. GB Remove feed tray by lifting upward and gently pulling away from dispenser. Xyron Technical Hotline 1-800-793-3523 - USA +45-7594-5866 - Europe Supplies available for: Xyron Technical Hotline 1-800-793-3523 - USA +45-7594-5866 - Europe Supplies available for: XYRON® 850 XYRON® 1200 Laminating Cartridges (DL and SL Series) Laminating Cartridges (DL Series) DL201-100 Two-Sided Lamination General use - Gloss Finish DL1101-100 Two-Sided Lamination SL201-100 One-Sided Lamination General use - Gloss Finish General use - Gloss Finish DL601-200 2 x Two-Sided Lamination General use 4 inch (106mm) SL1101-100 One-Sided Lamination General use - Gloss Finish SL601-200 4” w -One-Sided Lamination General Use -Gloss Finish Adhesive Application Cartridges (AT Series) Adhesive Application Cartridges (AT Series) AT201-50 Adhesive Application - Permanent High Tack AT202-50 Adhesive Application - Permanent Low Tack AT205-50 Adhesive Application - Permanent Acid Free AT206-50 Adhesive Application - Non Permanent Repositionable AT601-100 2 x Adhesive Application - Permanent High Tack 4 inch (106mm) AT1101-50 Adhesive Application Permanent High Tack AT1105-50 Adhesive Application Permanent Acid Free AT1106-50 Adhesive Application Non Permanent Repositionable Combination One Side Lamination / One Side Adhesive Application (LAT Series) Combination One Side Lamination / One Side Adhesive Application (LAT Series) LAT201-50 1 Side Laminate / 1 Side Adhesive Application LAT1101-50 (General Use Laminate / Permanent High Tack Adhesive) 1 Side Laminate / 1 Side Adhesive Application (General Use Laminate / Permanent High LAT202-50 1 Side Laminate / 1 Side Adhesive Application Tack Adhesive) (General Use Laminate / Permanent Low Tack Adhesive) LAT1106-50 LAT206-50 1 Side Laminate / 1 Side Adhesive Application 1 Side Laminate / 1 Side Adhesive Application (General Use Laminate / Non-permanent Repositionable Adhesive) (General Use Laminate / Non Permanent Repositionable Adhesive) Combination One Side Lamination / One Side Magnet (LM Series) Combination One Side Lamination / One Side Magnet (LM Series) LM201-12 1 Side Laminate / 1 Side Magnet (General Use Laminate / Magnet Backing) LM1101-10 1 Side Laminate / 1 Side Magnet (General Use Laminate / Magnet Backing) ® Xyron, Inc. 15820 North 84th Street Scottsdale, AZ 85260, USA 1-800-793-3523 FAX: 480-443-0118 ® Xyron, Inc. USA Xyron Europe A/S Xyron Asia © 2001 Xyron, Inc. ...
Other models in this manual:Laminators - 850 (135.29 kb)