Votes - 2, Average rating: 4
(
)
)
|
manual abstract
Lea estas instrucciones antes del usarlo. F S INDEX LAMINATOR CONTROLS / QUICK START GUIDE 3 ENGLISH 4-7 FRANCAIS 8-11 ESPANOL 12-15 LAMINATOR CONTROLS A H I G F E D B C 3 mil4 mil5 mil7 mil QUICK START GUIDE 3 2 4 1 3 mil4 mil5 mil7 mil 3 mil4 mil5 mil7 mil 3 mil4 mil5 mil7 mil 8 5 7 6 3 mil4 mil5 mil7 mil3 mil 9 10 11 3 4 ENGLISH E CAPABILITIES Performance Entry width 12.5” / 317mm Min pouch thickness 3 Mil. (per side) Max pouch thickness 7 Mil. (per side) Estimated heat-up time 4 minutes Cool down time 30-60 minutes Lamination speed approx. 20”/min (fixed speed) Number of rollers 4 Ready indication Light & beep Reverse function Yes Clear Path / Anti-jam engine Yes LED interface Yes Power Save / Auto shut-off Yes (60 mins) Photo-capable Yes Carrier-free Yes Carry handles Yes Technical Data Voltage / Frequency / Current(Amps) 110-120V AC; 60Hz; 5A Wattage 550 Watts Dimensions (HxWxD) 4.9” x 22” x 9” Net weight 14.3lbs / 6.5 kg Laminating capacity (max document thickness) 0.03” IMPORTANT SAFETY INSTRUCTIONS CAUTION: Please read before use and keep for future reference. When laminating; - plug the machine into an easily accessible socket. - to prevent electrical shock - do not use the appliance close to water, do not spill water on the appliance, power cord or wall socket. DO ensure the machine is on a stable surface. DO test laminate scrap sheets and set the machine before final laminations. DO remove staples and other metal articles prior to laminating. DO keep the machine away from heat and water sources. DO turn off the machine after each use. DO unplug the machine when not in use for an extended period. DO use pouches designed for use at the appropriate settings. DO keep away from pets, while in use. DO NOT leave the power cord in contact with hot surfaces. DO NOT leave power cord hanging from cupboards or shelves. DO NOT use appliance if the power cord is damaged. DO NOT attempt to open or otherwise repair the machine. DO NOT exceed the machines quoted performance. DO NOT allow minors to use this machine. DO NOT laminate sharp or metal objects (eg: staples, paper clips). DO NOT laminate heat-sensitive documents (eg: tickets, ultrasounds etc). DO NOT laminate with self-adhesive pouches (which require a cold setting). DO NOT laminate an empty pouch. LAMINATOR CONTROLS A On/off switch F Pouch / document entry slot B Standby button & LED G Entry support shelf C Pouch selection buttons (3, 4, 5, 7 Mil.) H Pouch / document exit D Reverse button & LED I Cooling system vents E Carry handles FEATURES & TIPS ‘System-Check’ function When switched on, the machine performs a ‘System-Check’ function. The control panel lights quickly flash in sequence to check their operation. ‘Safe Start’ function When switched on, the machine has a default ‘Safe Start’ function which starts to warm-up at the 3 Mil. setting. You may select other temperature settings as required. ‘Reverse’ function To eject the laminating pouch during use, press and hold down the reverse button until the pouch has ejected from the machine. ‘Power Save’ function If the machine is not active for 60 minutes, the ‘Power Save’ function will place the machine into standby mode. To operate the machine, press the ‘standby’ button. • Always put the item to be laminated into the appropriate sized pouch. • This machine does not need a carrier to laminate. • Always test laminate with a similar size and thickness before final process. • If required, trim excess material from around the item after lamination and cooling. • For best results, use Fellowes® brand laminating pouches: Enhance 3 Mil, Capture 5 Mil, Protect 7 Mil. • When working with different pouch thickness’ (temperature settings) it is recommended to start first with the thinnest pouches. 3 Mil SETTING UP THE LAMINATOR 3. 1. Ensure the machine is on a stable surface. Check that there is enough clear space behind the machine to allow items to pass through freely. Connect the supplied power cord to the machine. Plug the machine in to an easily accessible main socket. 2. 5 HOW TO LAMINATE 9. 4. Switch the power on. Turn the machine ‘On’ using the ‘standby’ button. The default setting is 3 Mil. thickness, if laminating different thickness pouches choose between 4, 5 or 7 Mil. pouch thickness as required. The selected button will flash red during warm-up or cool-down periods. When the selected temperature is reached, the flashing light will change from flashing red to solid green color and a signal will sound. Place the document into the open pouch. Ensure the document is centered against the sealed edge. Use the appropriate pouch size for the document. Ensure the pouch enters the machine sealed edge first. Keep the pouch straight and centered within the slot, not on an angle. Use the entry markings as a guide. Upon exit, the laminated pouch is hot and soft. To prevent jamming remove the pouch immediately. Place pouch on to a flat surface to cool. To eject a pouch, press and hold down the reverse button un...