|
manual abstract
If both the blender jar and the food processor bowl have been assembled correctly, only the blender works. If you want to use the food processor bowl, remove the blender jar and assemble the blender cap onto the motor unit (see page 25). All functions except the blender only work when the blender cap is assembled on the motor unit. Check whether the blender cap is assembled properly on the motor unit (see page 25). Also check whether the cone is assembled properly in the sieve. Check whether the blender jar is assembled properly on the motor unit. Problem Solution The appliance cannot be switched on. The appliance suddenly stops running. Dir t has entered the Click & Go button. All functions except the blender only work when the blender cap is assembled on the motor unit. Check whether the blender cap is assembled properly on the motor unit (see page 25). If you want to use the food processor, check whether the lid is properly assembled on the bowl (‘click’). If you want to use the citrus press, check whether the cone is assembled properly in the sieve (see picture on page 49). If you want to use the blender, make sure the blender jar is assembled properly on the motor unit. The thermal safety cut-out has probably cut off the power supply to the appliance because the appliance has overheated. 1) Unplug the appliance 2) Let the appliance cool down for 60 minutes 3) Put the mains plug in the socket 4) Switch on the appliance again. Take the lid off the bowl, unscrew the Click & Go button by turning it anticlockwise and clean the lid in the dishwasher. If there is still dir t in the Click & Go button, clean the lid in the dishwasher a second time. If you do not have a dishwasher, you can also let the lid soak in warm water with some washing- up liquid for a while and then rinse it in fresh water. 2 DK | Fejlfinding Problem Losning Foodprocessoren fungerer ikke. Bade blenderglas og foodprocessorskal er sat pa, men kun blenderen korer. Citruspresseren fungerer ikke. Blenderen virker ikke Med undtagelse af blenderen fungerer funktionerne kun, nar blenderd.kslet er monteret pa motorenheden. Kontroller, om blenderd.kslet er monteret korrekt pa motorenheden (se side 25). Kontroller ogsa, om laget er last rigtigt pa plads pa skalen (“klik”). Hvis bade blenderglas og foodprocessorskal er monteret korrekt, er det kun blenderen , der fungerer. Hvis du vil bruge foodprocessorskalen, skal du forst fjerne blenderglasset og skrue blenderd.kslet pa motorenheden (se side 25). Med undtagelse af blenderen fungerer funktionerne kun, nar blenderd.kslet er monteret pa motorenheden. Kontroller, om blenderd.kslet er monteret korrekt pa motorenheden (se side 25). Kontroller ogsa, om pressekeglen sidder rigtigt i sien. Kontroller, om blenderglasset er monteret korrekt pa motorenheden. Problem Losning Apparatet t.nder ikke. Apparatet stopper pludselig. Der er kommet snavs i Click & Goknappen. Med undtagelse af blenderen fungerer funktionerne kun, nar blenderd.kslet er monter...
Other models in this manual:Food Processors - HR7739/55 (17.63 mb)