Votes - 4, Average rating: 3.8 ( )

Manafacture: Linear File size: 781.02 kb File name: Language of manual:

. Set the communicator reporting options (Section 4.12). . Set the communicator format reporting options (Section 4.13 or 4.14). 3. PROGRAM THE CONSOLE WITH THE ACCOUNT PROFILE . Choose an Account Profile (Section 5.2). . Connect to the Console (Section 5.3). . Send the data to the Console (Section 5.4). . Receive the data from the Console (Section 5.5). . Change the Console’s Mode (Section 5.6). . Disconnect from the Console (Section 5.7). IMPORTANT: AFTER ANY PROGRAMMING CHANGES ARE MADE TO A CONSOLE, PERFORM THOROUGH TESTING TO VERIFY THAT THE CONSOLE OPERATES AS INTENDED. 1.4 PROGRAM INSTALLATION The RA-2400 Remote Access Program software is supplied on a CDROM. The installation program will create a directory on your hard disk drive. Be sure that you have at least 10 megabytes free on the hard disk for the program and any Account Profile files that you create. To Install the Remote Access Program: . The first step is to close all other running programs. . Place the Remote Access CD into your computer CD drive. . The installation process should start automatically. If the CD does not auto run, use Windows Explorer to find RASETUP.EXE on the CD. Double-click on RASETUP.EXE and the install program will start. . Click the Next button to install the Remote Access software. Follow the on-screen instructions as the setup program creates the directory and copies the program files onto your hard disk. A Remote Access icon will be created on your desktop screen. . If you are performing a reinstallation, or an update, you will be prompted to uninstall RA-2400 first. After the uninstall is completed, browse to the appropriate drive letter for your CD drive and double- click on RASETUP.EXE. Then follow the on-screen steps to install the Remote Access software. . NOTE: If Windows asks whether to replace existing .DLL files, first answer NO. If RA-2400 fails to run, re-install RA-2400 and answer YES to replace existing .DLL files. . Remove the CD and store it in a safe place. To Remove the Remote Access Program: . Press START, SETTINGS, CONTROL PANEL. Double-click on ADD/REMOVE PROGRAMS. . Select Linear RA-2400 and click ADD/REMOVE or CHANGE/ REMOVE button depending on your Windows Operating system. 1.5 TESTING THE MODEM Before you run the Remote Access Program, be sure that the computer is running correctly and that the modem is installed and working properly. To Test the Modem: Windows Control Panel can be used to test the modem and determine what COM port it is connected to. . Press START, SETTINGS, CONTROL PANEL. Double-click on MODEMS. . Verify that a modem is shown in the Modem Properties window. . Click on the DIAGNOSTICS tab. The modem installed with the COM port highlighted should be shown. . Note the COM port information. It is used when setting COM port in the Communications Setup window (see Section 3.1). . Test the modem by pressing the MORE INFO... button. IF THE MODEM IS CONNECTED AND WORKING PROPERLY...

Download now

Please, enter two numbers from picture: