Votes - , Average rating:
(
)
)
Manafacture: Kompernass
File size: 1004.41 kb
File name: 56310243-c7ce-4a8d-82c8-0fcdd71d9a89.pdf
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
manual abstract
1). • Insert the mixing bowl y. The base of the mixing bowl y must engage in the recesses k on the appliance. • Press the unlocking button f and bring the swivel arm h into operating position 1 (see chapter „Operating positions“). • Remove the drive protection lid for the food processor u (Fig. 4). • Insert the food processor u with the drive shaft a into the drive opening (The marking on the food processor u to the marking on the swivel arm h) and turn it clockwise as far as it will go. • Remove the lid with stodger d. • Depending on the task to be performed, place the cutting s, rasping o or rubbing i disc onto the drive shaft a of the food processor. • Place the lid with stodger d on the food processor u and latch it down. • Set the rotary switch g to the desired level. Note: Do not press too many ingredients in the food processor u. Take note of the table in the chapter „Recommended filling quantities“. • Insert ingredients through the loading shaft with the stodger d. - 5 Risk of injury from rotating parts! To avoid personal injury and damage to the appliance, NEVER insert or place your hands or foreign objects into the loading shaft. Only insert ingredients by use of the stodger. Only change accessories when the drive motor j is at standstill! After being switched off, the drive motor j continues to run for a short time. The appliance may only be used when the drive openings not being utilised are covered with drive protection lids. In cases of malfunction switch the appliance off and remove the plug from the wall socket, this will avoid an unintentional switching-on of the appliance. On task completion • Switch the appliance off with the rotary switch g. • Turn the food processor u anti-clockwise and remove it. • Disassemble the food processor u and clean all parts (see chapter „Cleaning and care“). Working with the mixer Risk of scalds! Allow hot fluids to cool to a hand-warm temperature (ca. 30–40°C) before they are poured into the mixer r. Proceed as follows to prepare the appliance for operation with the mixer r: • Press the unlocking button f and bring the swivel arm h into operating position 3 (see chapter „Operating positions“). • Remove the drive protection lid for the mixer (Fig. 7). • Fit the mixer r (Marking on the base onto the marking on the base machine) and turn it anti-clockwise as far as it will go (Fig. 8). • Fill with ingredients. Maximum amounts: 1 litre; foaming liquids, maximum 0,5 litre; optimal processing amount for solids: 50–100 g Note: Take note of the table in the chapter „Recommended filling quantities“. • Place on the lid with funnel and press it down firmly (Fig. 9). • Set the rotary switch g to the desired level. Risk of injury from sharp knife/rotating drive! NEVER reach into the mixer r when it is in use! Remove/place the mixer r only when the drive motor j is at stillstand! Only use the mixer r with the lid firmly in position. In cases of malfunction switch the appliance off and remove the plug from the wall socket, this will avoid an unintentional switching-on of the appliance. Refilling with ingredients • Turn the appliance off with the rotary switch g. • Press the button on the handle of the mixer r, remove the lid and fill with ingredients or • remove the funnel and slowly refill with solids through the refill opening (Fig. 10) or • refill with fluid ingredients by means of the trichter (Fig. 11). On task completion • Switch the appliance off with the rotary switch g. • Turn the mixer r clockwise and remove it. Note: The mixer r is best cleaned immediately after use (see chapter „Cleaning and care“). - 6 Cleaning and care TroubleshootinTroubleshooting Danger of electrical shocks! Warning: Never submerse the appliance in water or other liquids. Attention! DO NOT use any abrasive cleaning agents. Remove the power plug. Wipe the appliance with a damp cloth. If necessary, use a mild detergent. Afterwards, dry the appliance completely. Clean the stainless steel mixing bowl y, food processor u and accessories. Clean all accessories, the stainless steel mixing bowl y and the food processor u in water with some mild detergent. Rinse them with clear water and dry them well. The accessories, the stainless steel mixing bowl y and the food processor u are NOT suitable for a dishwasher. Cleaning the mixer Risk of injury from the sharp knife! Do not handle the mixer knife with bare hands. Attention! DO NOT use any abrasive cleaning agents. For cleaning, put some water with detergent into the assembled for use mixer r. Switch the mixer r on for a few seconds. Pour out the cleaning solution and then rinse the mixer r with clear water. Possible residues can be removed with a dishwashing brush. If the appliance suddenly ceases operation: The appliance has overheated and triggered the automatic safety switch-off. • Place the rotary switch g at 0. • Remove the plug from the wall socket. • Allow the appliance to cool for 15 minutes. • If, after 15 minutes, the appliance has not yet ...